Installing a high-commode toilet, also known as a comfort-height toilet, is a straightforward process. Here's a detailed guide to help you through the installation:
*Materials You'll Need:*
- High-commode toilet
- Wax ring
- Toilet flange bolts
- Adjustable wrench
- Screwdriver
- Level
- Measuring tape
- Putty knife
- Bucket or towels
- Caulk (optional)
- Toilet seat (if not included)
*Installation Steps:*
1. *Prepare the Area:*
- Turn off the water supply to the existing toilet and flush to empty the tank.
- Remove any water left in the bowl using a sponge or towel.
- Remove the old toilet by unscrewing the nuts from the flange bolts and lifting the toilet off the flange.
2. *Inspect the Flange:*
- Check the condition of the toilet flange on the floor. Replace or repair if damaged.
3. *Install Wax Ring:*
- Place the wax ring onto the flange, ensuring it's centered over the opening.
4. *Position the Toilet:*
- Carefully position the high-commode toilet over the wax ring and flange bolts.
- Gently press down to compress the wax ring and create a seal.
5. *Secure the Toilet:*
- Insert the flange bolts into the holes on the toilet base.
- Tighten the nuts onto the flange bolts, alternating sides to ensure even pressure.
- Use an adjustable wrench to tighten the nuts, but be careful not to overtighten and crack the toilet base.
6. *Level the Toilet:*
- Place a level across the toilet bowl to ensure it's level both front-to-back and side-to-side.
- Adjust the toilet's position as needed.
7. *Attach the Tank:*
- If your high-commode toilet comes with a separate tank, follow the manufacturer's instructions to attach it to the bowl.
8. *Connect the Water Supply:*
- Attach the water supply line to the fill valve on the bottom of the tank.
- Hand-tighten the nut and then give it a slight extra turn using pliers.
9. *Turn on Water Supply:*
- Slowly turn on the water supply valve to fill the tank.
- Check for any leaks around the water supply connection.
10. *Check Flush and Fill:*
- Flush the toilet and observe the water flow and drainage.
- Ensure the tank refills properly after flushing.
11. *Caulk (Optional):*
- If desired, apply a bead of caulk around the base of the toilet to create a finished look and prevent moisture from seeping underneath.
12. *Install Toilet Seat:*
- If the toilet seat is not pre-installed, follow the manufacturer's instructions to attach the seat securely.
13. *Final Check:*
- Double-check all connections, flush again, and observe for any issues or leaks.
14. *Educate Users:*
- Provide information on the toilet's features, flushing mechanism, and maintenance.
Remember to consult the manufacturer's instructions that come with your specific toilet model, as installation steps might vary slightly. If you're not confident in your plumbing skills, consider hiring a professional plumber for the installation to ensure everything is done correctly.
22 мар 2020
