There was A LOT oil on the aperture blades and the aperture assembly in my Carl Zeiss Distagon 2.8 / 25 T* for Contax / Yashica.
Remember to set a mark on the aperture plate with the 6 small holes, and also on the inside of the aperture assembly tube, BEFORE you take the plate out..., just so you know where it should be when assemble the aperture assembly again.
I forgot to tighten the little screw on the small pin with the spring, at 1:00:19 but I did it after the film.
Here are some link's to different repair tool's and lubricating stuff:
"ORBIT" HEPA Blower:
photosol.com/p...
You can buy it here:
www.adorama.co...
"Liqui-Moly" LM 50 Litho HT:
www.amazon.co....
"Liqui-Moly" LM47 MoS2 grease with Molybdenum disulfide:
products.liqui...
or on Amazon:
www.amazon.co....
Contact glue:
www.loctitepro...
Japan Hobby Tool rubber cone:
www.amazon.com...
18 different size rubber repair tool's:
www.amazon.com...
You can also buy this set.
Lens Repair Set with pointed, flat, half flat tips:
www.amazon.com...
JIS cross head screw driver's:
www.amazon.com...
Or this set, that is the set I use:
eustore.ifixit...
Lens cleaning wipes (PEC-PAD):
www.amazon.com...
Thin Cotton Buds x 200 you can buy them here:
www.muji.eu/pa...
DSLRKIT Pro Lens Vise Tool Repair Filter Ring Ajustment Steel 27mm to 130mm:
www.amazon.com...
Japan Hobby Tool Helical Grease Made in Japan:
www.amazon.com...
Loctite 222 50ml Threadlocker
www.amazon.com...
28 сен 2024