Stihl MS 261 CM (04 Light Bar) vs Husqvarna 550 xp Mark 2 - Pro Chainsaw Comparison

Подписаться 13 тыс.

Просмотров 27 тыс.

50% 1

I'm finally running my Stihl MS 261 CM with an 04 light bar vs my Husqvarna 550 xp Mark 2. This isn't the first chainsaw showdown I've done between these two saws on the channel. (Actually, I've got at least a dozen videos on these two chainsaws!) Check out round 1 and round 2 in the links below. After the first two rounds, I received many comments saying that I should run them against each other again with an 04 light bar on the Stihl. I wasn't able to get my hands on a light bar until now, so here we are doing the third round of 261 vs 550.
ROUND 1: Stock (green chain) Stihl MS 261 CM vs Stock Husqvarna 550 xp Mark 2: • Stihl MS 261 CM vs Hus...
ROUND 2: Stihl MS 261 CM with full chisel (yellow) chain vs stock Husqvarna 550 xp Mark 2 (semi-chisel, x cut chain): • REMATCH! Stihl MS 261 ...
I really like both of these chainsaws. You may have seen my reviews on them (linked below). Actually, I love the 261 and the 550xp so much, that I couldn't decide between them! That's why I have both. I had no preconceived notions or agenda in running these saws against each other. I coughed up my own cash for both of these chainsaws.
CHAINSAW REVIEW VIDEOS:
Stihl MS 261 C-M Review: • STIHL MS 261 C-M REVIE...
Stihl MS 261 Long-Term Review: • Stihl MS 261 C-M LONG-...
Husqvarna 550xp Mark II Review: • HUSQVARNA 550XP MARK I...
550xp Mark II Long-Term Review: • Husqvarna 550 XP Mark ...
HOW-TO VIDEOS ON STIHL MS 261 and HUSQVARNA 550
How to maintain 261: • Chainsaw Maintenance (...
261 Start-Up Procedure: • Starting a Stihl MS 26...
How to maintain 550: • How to Maintain Husqva...
550 Start-Up Procedure: • Starting Procedure for...
550 Troubleshooting - Chain won't turn: • Chainsaw Chain Won't T...
MY FAVORITE FIREWOOD TOOLS
Moisture Meter: rstyle.me/+L_z...
Combi Gas/Oil Can: rstyle.me/+heO...
50ft Loggers Tape: rstyle.me/+Sfd...
LogOx: amzn.to/2MBt8zy
Hard Hat: amzn.to/3CHMTdC
Chainsaw Chaps: rstyle.me/+a0T...
Husqvarna Sharpening Kit: rstyle.me/+zbE...
Oregon 620 Bench Grinder: rstyle.me/+4aK...
Firewood Bundle Bags: amzn.to/2Kr2Xe4
Kinco Gloves: amzn.to/2W8ZxCG
Bugz Goggles: amzn.to/3nAe6aY
As an Amazon Associate I receive a small commission on eligible purchases.
Thank you for watching today. If you like videos that inspire you to get outdoors and work with equipment and tools, hit the subscribe button. This is the channel for you.
Find me on social media:
Instagram: @oldschoolmillennial
Facebook: oldschoolmillennial

Развлечения

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@johnmakarsky2787 2 месяца назад

I absolutely loved, how both saws harmonized with each other in the cut! Music to my ears.

@outdoorsnevada4138 9 месяцев назад

My father was a timber cutter for nearly 10 years. During those years his father, brothers, and him all ran stihl chainsaws! Excellent reliable saws! He still uses them to this day 30+ years later! There were also those on the mountain that ran Husqvarnas! And the rivalry was real of which saw was superior and why! In the end though both brands rip and get the job done. The biggest factors though was the operators and how they maintained their saws and keeping them sharp. My father was a 3 star logger for his first few years and became a 5 star logger in later years with awards to prove it. Husqvarna operators were also 5 star loggers with awards to prove it! Find a saw that is comfortable to you and get proper instruction in how to be efficient and safe with your saw of choice!

@OldSchoolMillennial 9 месяцев назад

It's great to hear this story of your father. I agree with you!

@ryanbruner8928 10 месяцев назад

I 'm a Stihl guy, primarily because I worked in a small engine shop and I found Stihls to be much easier to work on, but both make great saws! I figure for what my needs were there was never any reason to switch brands.

@OldSchoolMillennial 10 месяцев назад

I understand. If it works for you, that's all that matters. I like them both for different reasons.

@stihlms400cm3 21 день назад

Totally enjoyed your video. Had an opportunity to spend a day operating both saws, felling, delimbing and cutting ( bucking ) to length, l found the Husqvarna 550 ll xp with 15in B&C had more bottom end torque overall, l found the Stihl MS 261 with 16in B&C better balanced , lighter, smoother, higher RPM chain speed, a dream to work with and a sweeter sound, both are exceptional saws, for me MS 261 gets the gold medal !

@roblow8126 9 месяцев назад

Had my 550 a little over a year now thanks to your previous videos on it and its never failed me. Always a joy to pick up. Keep up the content, its awesome.

@OldSchoolMillennial 9 месяцев назад

Thank you. And I'm glad to hear you're enjoying your 550. I agree that they're a lot of fun to run.

@EricChmelarsky 6 месяцев назад

If u were ever to make a part IV.: STIHL 23 RSC 72 chain, full chisel, no anti kickback BS. Will work on both saws. Expensive, YES. It's what I run on the 550 if I'm felling or need to bore cut, or just want to get it done. Keep doing what your doing, good stuff 👏.

@dcvariousvids8082 6 месяцев назад

Another well balanced test. Thank you. Some people like Husky, some like Stihl, some like Echo. Doesn’t much matter what you prefer, if you have a reliable saw/s and they suit your needs, then that’s all that really matters. Plus, if you have a particular dealership close by, it makes sense to go with that brand, as just through wear+tear alone, you’re going to need spares. If the nearest dealer or dealers offer both H. and S., possibly E. too, You can pick ‘n’ mix if you like. Personally I prefer Husky but I’ve got nothing against Stihl or Echo. Before someone says, “But have you tried brand-X?” I have a Husky 545 Mk1 on 15” and a Husky 550XP Mk2 on 15” & 18”; and a Stihl 500i on 25”. Each has its niche, though the 550 does 80% of what the 500i will do. I’m not that concerned with how fast the cutting is, more that a given saw+bar+chain combo is up to the task. I only use full chisel chain but don’t use skip chain, as I can only get it priced per drivelink, which is extraordinarily expensive. So the Huskies use Oregon 21LPX .325” .058, while the Stihl uses Stihl RS 3/8” .063. A while back, I bought a couple of Hexa loops but still haven’t used them, so can’t comment on the Hexa.

@OldSchoolMillennial 6 месяцев назад

I agree! What matters is a reliable saw that will suit your needs.

@ChuckisOutside 6 месяцев назад

I have been looking at the 261 Stihl for a while. Today I stopped in my Husqvarna dealer and saw the 550 XP Mark II for the first time. After watching your comparison videos I will be getting the 550 tomorrow. Thanks for the great videos. I’m a new subscriber.

@OldSchoolMillennial 6 месяцев назад

Awesome, enjoy your new saw. I'm glad I could help. Welcome to the channel!

@dcvariousvids8082 6 месяцев назад

I’ve used both saws but only own one of them. Though I’m sure you wouldn’t be disappointed with either. The only differences that I’m aware of, are that the 261’s powerhead is a tad l lighter, 100g/4oz.). But I think that got more to do with the Stihl having a plastic front handle, whereas the Husky uses aluminium. They’re both solidly made, both have the same power output, 550 has a vib-m/s rating of L3.3-R4.9 vs the 261’s vib-m/s rating of L3.5-3.5R so not much in it. Though if you’ve got poor circulation or a vibration induced injury, you’d be better off with less vibration.

@derrickvarnadore1682 7 месяцев назад

22 years in the tree biz… both companies have great saws… use and threshold for capacity and weight are the big deals… for instance.. if I’m on the ground felling hardwood under 32 inch dba… then I’m choosing the husq 390 with a 28 inch bar everytime… now.. if I’m flying on a crane making cuts just as large then I’m taking the 500 I everytime.. I’ve had several 550’s they’re great and handy saws… we use them a lot for light crane work and ground work for the new guys… that being said… mine have all been temperamental… and a husq will pinch on a new guy quick as shit… sooo.. the 261 is our new mid size saw. The ground guys can sense the wood biting easier and my local dealer is quick to get to. The 550 remains for the climbers.

@ProductiveRecreation 10 месяцев назад

Both great saws that spec out really close to each other. Not brand loyal here… I love my MS261, and I bought it because the dealer is about 15min away… the standard bar and chain on it at .063 is definitely fat and heavy compared to most setups. It wouldn’t surprise me if the length of chain/number of drive links is also a factor… but you can’t isolate that without a setup that works on both powerheads.

@OldSchoolMillennial 10 месяцев назад

I love mine too. Having a close dealer is definitely a good reason to go that route. Yea, if a bar could work on both, that would be nice. Honestly, after running them three times with three types of chains and giving the 261 a full chisel 50 gauge this time, I don't know that I'll find a different result.

@ftlaud911 10 месяцев назад

You did everuthing ypu could for the 261 to come put on top. I like both brands. Bought the 550 for DIY online parts and what seems like higher rpm's in the cut from watching videos. Didn't think the 261 would get spanked that bad honestly. Especially with .050 and full chisel chain. The 261 still looks damn sexy and would be happy to own one. Still undecided between 572/400/462 for my big boy saw. Right now the 462 is my top pick, but value wise the 572 pulls back into the race. The 400 is the sleeper pick. Again, can't go wrong with either of them. For now the 550 does everything I need. I just like chainsaws 😊

@OldSchoolMillennial 10 месяцев назад

I agree with everything you said. Especially the fact that I just chainsaws too!

@mastojira6561 9 месяцев назад

462 is a lovely saw

@stevenpate8490 4 месяца назад

So, why have you not tried to run the same chain on both? Maybe Oregon, or whatever brand.

@Kirks_Custom_Chainsaws 10 месяцев назад

Great video! I like the "expert opinion" from the younger generation!🤣 I'll give you credit, you're doing everything you can to give that 261 a chance. I have Stihls and Huskies, so I am not partial to either brand, I love them both. Stihl just doesn't have it in the 50cc class. They do in the 67cc ms400 though! I was actually happy to see your timed cuts, because I've noticed something with my 545 and 261 saws. Both of my 545s are consistent, consistent performance per saw and with each other. My 261 on the other hand displays quite a varying performance. Just as your timed cuts for your 261 varied considerably, I've noticed the same with mine. Sometimes I can actually feel it slow down and speed up in the same cut. I haven't really had much time to experiment and test with mine yet, but I fully intend to investigate when I have time as this saw came to me in pretty rough shape. I'll be posting some videos as i go through it. And BTW, I will be porting it and it will be a screamer when I'm done with it. Saw safe!

@OldSchoolMillennial 10 месяцев назад

That's really interesting. Yes, please post the videos with the timing. That will be interesting to see. And that saw would be really mean ported. I'd love to see that, too.

@dkitchen2345 10 месяцев назад

I also own the Husqvarna 550 Mark ii and absolutely LOVE it. I'm not a professional arborist. I have a wood burning stove and use it to fell and buck firewood and it works great. I call it my little screaming demon. It's quite a beast for a 50cc saw. Love your channel Glen. Cute kids!

@OldSchoolMillennial 9 месяцев назад

Thanks! That's funny. I have said those very words about the 550. 😄

@kenneth.handsome3443 6 месяцев назад

Thanks to your videos I chose the Husqvarna 550 for my first and only chainsaw 😊

@OldSchoolMillennial 6 месяцев назад

Good choice!

@patrickvennard838 10 месяцев назад

Great video I have both Stihl and Husky saws I sold my MS 261 and ported my 550XP. You have plenty of people in the US to port your 261. On my 550XP I run 058 Stihl RS chain. Speed is not always important but it is fun.

@OldSchoolMillennial 10 месяцев назад

Thanks, Patrick! I may look at porting one someday.

@Orefamilylawncare 10 месяцев назад

The 550 spanked that stihl........ again. Both good saws but results are results.

@OldSchoolMillennial 10 месяцев назад

Both good saws for sure. Yea, I'm just trying to show people what they can expect from each saw.

@michaelduncan123 9 месяцев назад

@OldSchoolMillennial You would think the 261 would do better than it did, but it obviously did not. Husky has got it beat in the 50cc class. Stihl wins in weight, but the 550 won with an absolute no contest in speed. I own the 261, but the 550 is bad to the bone for it's size. I made the comment in your 261 giveaway video that if you put an 04 light bar on the 261 that they would be even. This was a great comparison. I enjoy watching your channel Glen.

@rodneyfalk4591 10 месяцев назад

Good video! I had good luck with both saws brands. I live in Colorado so most of my work is about 7 to 10 thousand feet above sea level in the Colorado mountains. I have two give it to Husky auto tune seems to run better at altitude. I’m looking forward to trying the fuel injected, 500 STIHL I heard they will run at high altitude with no problems. Thanks for the video. Take care of those cute kids God bless.🙏

@OldSchoolMillennial 10 месяцев назад

Thanks, Rodney! Oh, and 500 is a ripper. You'll love running that saw. I appreciate it, and I'm doing my best. God bless you, too.

@kbittorf335 7 месяцев назад

Good video! I have a Husqvarna 550xp g Mark I. Received a good deal on it just before the Mark II came out. You cannot get heated handles on Stihl in the USA. For me the only con is the outboard clutch. PITA when you forget to take the chain brake off when you remove the clutch cover in the woods! It has X cut chain. I run the Stihl 23rs on a Dolmar 5105 and both saws have Sugihara bars. Love em! The Dolmar is no slouch! Like a cross between Husky and Stihl.

@dab. 9 месяцев назад

I did like you and bought both. Recently I sold the 550 XPII and kept the Stihl MS261, even though the 550 was faster. Why? - Number one reason is the Stihl is lighter. Noticably so at the end of a day in the woods. - I much prefer the Stihl clutch design. - Husky was randomly difficult to start both from hot and cold for no apparent reason. Some days fine, other days not. - You were lucky to receive the X-cut chain. Mine was supplied with an inferior Husky chain. For a 'pro' saw this seemed like penny-pinching and didn't give me a good feeling about the brand. - Sometimes the Husky would need the autotune resetting. I've never had to do this on the Stihl. - Husky usable bar length is shorter than the Stihl by about an inch. - I like the decompression valve on the 261 (yes I know - not needed on a 50cc saw but I like it anyway).

@OldSchoolMillennial 9 месяцев назад

Thanks for your well-thought-out comment. I am sure others will appreciate hearing your experience with these 2 saws. I agree about the clutch on the 261. I haven't run into the same issues with the Husqvarna starting.

@tobiasstaermose 15 дней назад

You can run usually run a Stihl bar on a Husqvarna/Jonsered with 1 extra link, eg. 62 to 63.

@Dibelchii300 10 месяцев назад

I ran Stihl 23RS on my 550 with a 20" bar 80dl and same chain but 18" bar 74dl on the 261. That gives the 261 the advantage but the Husqy was still faster in 16 inch pine. 😂

@davidedwards3734 10 месяцев назад

Another Great comparison!! Guesz ill just have to suffer with my MS261!!! Stay Hydrated and Have a Safe Day

@OldSchoolMillennial 10 месяцев назад

Thanks, David! Lol, I guess so. I'll take that kind of suffering any day.

@tedneitzel 9 месяцев назад

As i said in your last comparison my friend had the 261 and i have a 550mk2 we both run 3/8 and i got us both c83 chains and my Husky spanked his 261! He had buyers remorse so bad he sold me his 261c and bought a 550mk2! I now own both!

@nmancini 9 месяцев назад

Christmas came early, been waiting for this release

@OldSchoolMillennial 9 месяцев назад

Merry Christmas!

@starlightHT 9 месяцев назад

Stihl has an increase of almost 270 Euros compared to Husqvarna here where I live.... The price difference is crazy....

@Anders_HeymSR30 9 месяцев назад

Same here: can get a 545 mk2 for 600 euro, and 850 euro for a 261

@OldSchoolMillennial 9 месяцев назад

Wow, that is crazy. I guess that makes a decision easier.

@sch3l3 7 месяцев назад

In what country ? looking to purchase a 550XP

@starlightHT 7 месяцев назад

@@sch3l3 Portugal.... It is possible to buy 550xp mk 2 for just over 640 euros site (ferramentas)

@hillcresthayfarms9664 7 месяцев назад

I own both saws and I like both saws they both run tit for tat with each other, there are things i like better on the stihl and there are things i like better on the husky, the thing I dislike the most about the husqvarna and no one seems to mention in there comparison videos is useable bar length you have to run a 20 inch bar on the 550 to get the same useable bar length as a 18 inch on the stihl, with a stihl 261 with a 18 inch bar it measures 17.5 inchs from the tip of the bar to the longest point of the bucking spike and a 18 inch bar on the 550 measures 15.5 inchs to the longest point of the bucking spike. So to get the same cutting capacity with the husqvarna you have to add a longer bar and chain, this ads more weight to a saw that is already heavier than the stihl. I am not trying to nit pick but this should be noted for any one looking to buy one of these saws.

@Super-Dave-Outdoors 10 месяцев назад

Yup, the stihl just dont have the same beans. Even ported the 261 probably wont beat the stock 550 by much.

@kraftzion 2 месяца назад

The husky responds extremely well to a muffler mod.

@hamradi0 10 месяцев назад

The only real advantage the 261CM has over the 550XP is that it is about 1 lb lighter. I bought the 261 for this reason.

@OldSchoolMillennial 10 месяцев назад

I kind definitely appreciate that. Especially after a long day of cutting.

@kojirohyuga1050 10 месяцев назад

@@OldSchoolMillennial Would you be so kind and give us the weight of saws with the bars and chains used ? With and without oil and gas.

@positiveaspect5730 2 месяца назад

I was looking for a comparison video as Im on the fence. Ive used both. They are both high rpm saws designed for the type of cuts you did. I suppose you could do some different cuts that really test the autotune/mtronic like dogging in to see which saw cuts better under load. That’s the way I was taught to cut when i did chainsaw training recently anyway so if the saw kicks back the dogs stop it jumping out of the cut

@peskypeet 10 месяцев назад

Very nice. Just found your channel and watched the 3 comparisons. Muffler mod Bark Box etc both and head to head again.

@OldSchoolMillennial 9 месяцев назад

Welcome to the channel! That would make an awesome video.

@zillman-mc9ld 9 месяцев назад

Kinda considering husqvarna, but the only thing that kind of spooks me is the 1 piston ring design they use

@kenturner3268 8 месяцев назад

High performance nikasil engines only need and must have a single ring for peak performance. My Mercury 2.5 sport outboard 280hp engine has single ring pistons.

@OpenAirAdventure 10 месяцев назад

Great video Glen. Sounds like the kids are paying attention. Have a great weekend. Kenny

@OldSchoolMillennial 10 месяцев назад

They usually don't miss a beat.

@benjaminleslie3155 9 месяцев назад

Now you gotta compare the old ms260 vs husky 346xp 😆

@robintaylor-mockingeemill8223 9 месяцев назад

I have both saws as well . My 550 is an early model . I love both saws but the Stihl has no chance of beating the Husky , it is faster and more powerful .

@chevysilver-ray-dough6328 6 месяцев назад

I've had both brands in the past. Currently I have stihls but the next saw I buy will be a varna. I've had better luck with them and in my opinion they are better saws. I cut firewood for a living so having a reliable saw is a must and from my experience stihl just isn't the brand for me.

@Adog5526 13 дней назад

I wanted to get the 550, but I like the feel of the 261 better. It just feels like a smaller more nimble saw. I have a 372 I use on big stuff so I don’t need the 261 to do anything big. I use it mostly for limbs and light work. I wanted to stick with Husqvarna, but the 550 felt like I wasn’t getting much weight savings over my 372. If I only had one saw it would probably be a 550. But I think the 372 and 261 will cover all my needs. Both good saws. I’m not racing anybody cutting. As long as it runs better than that piece of crap ryobi someone gave me I’m happy.

@merrittbebout7279 10 месяцев назад

cute kids! I also have both the 550 made me look at husky

@OldSchoolMillennial 10 месяцев назад

Thanks, man.

@lesliebeckner9640 2 месяца назад

It really don't matter what one runs faster how about reliability

@PhillipDrumz 3 месяца назад

This video makes me want to have both!

@brownbear846 3 месяца назад

Kids changed from 261 to 550 once they heard you were running an xcut chain. Once its is sharpened it loses a bit of cutting performance. 550 is a beast

@parkerk7018 10 месяцев назад

What do you think of the light 04 bar compared to the stock stihl bar?

@OldSchoolMillennial 9 месяцев назад

I like the balance on it better. So far, it seems to be pretty durable, but I need to run it more to see for sure.

@biaschdlznep 8 месяцев назад

In europe the 261c came (i think since 2021), with the light 04 bar and 1,3mm chain 26RS Pro.

@usmcshepherdE9 10 месяцев назад

What are you using to clean your chainsaws? Looked like a type of canned air?

@OldSchoolMillennial 10 месяцев назад

I'm using an air hose hooked to an air compressor.

@polderfischer8565 9 месяцев назад

Nice saws but a much nicer family! Greetings

@OldSchoolMillennial 9 месяцев назад

I wouldn't trade them for all of the chainsaws in the world.

@fatefarmspa 10 месяцев назад

Cool video !

@PurpleCollarLife 10 месяцев назад

Great video!

@timkelley6616 3 месяца назад

Oh, we know you want a Ripsaw ported 261! 😂 Channel Goals!

@cMurder2osix 5 месяцев назад

I don't count when I cut, ever. I'm grabbing the Stihl, 1lb lighter with 2 second lost. 😂

@falfield 3 месяца назад

How old is your MS261 and do you have the original spec sheet to check? There was a change (~2yr ago in UK) and the engine power was increased from 2.8kW to 3.0kW without a change in model designation. I'm wondering if this may be relevant.

@JeffB1961 7 месяцев назад

i'm looking to ge a first chainsaw and i'm considering the 261 cm . the inside clutch looks much easier to deal with if i get my blade stuck in a tree .

@kollkilmade5827 11 дней назад

Stihl has more low end torque so it’s faster if you dig the dogs in and power thru the log. Husky performs better at higher revs so the way you’re bucking is suited for husky

@erikleirmo9147 2 месяца назад

So Sthil or husqvarna and only buying one saw maybe 2 under 1000 what do you buy?

@iffykidmn8170 Месяц назад

either one

@johnbailey2306 Месяц назад

Full chisel takes more power to pull!!!

@kevywilliams3304 2 месяца назад

Scroll to 7:00

@kenturner3268 8 месяцев назад

I agree with the kids. Husqvarna for the win. Far more modern ergonomic saw. I have an autotune and have had no problems.

@packman44 6 месяцев назад

Stihl light 04 better than 1.6 mm bar durability?

@EricChmelarsky 6 месяцев назад

Do a muffler mod.,or put a pipe on the 550, like slapping a horse on the backside. She is gone in a heartbeat. I like your real world, no BS videos. Stay healthy, stay strong 💪.

@brandonsmith3447 9 месяцев назад

Come on now. Everyone but a Stihl nut hugger knows that the 550 is the far superior saw to the 261. full chisel, semi chisel, square ground who cares the 550 shits on the stihl.

@jasonlamar2053 3 месяца назад

This and your previous 2 tests are definitely consistent with the hp & tq these saws actually make. Don't let anyone tell you otherwise. Both are rated at 4.0HP, but the Husky is underrated. A well known porter in MI has a dyno he tests his builds, and he did a 50cc saw comparo, all stock. 2 of the saws were a 261c and 550XP Mark 2. The dyno graphs for these two start at 8:36. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IPB25bx3zas.html

@nick-trish Месяц назад

You run a greenie on Stihl first time?! And you supposed to be some kinda pro?! Do a muffler mod and full chisel on the 261cm and reprogram it... Nothing will touch it!!!

@-cj-3729 День назад

Yeah, he’s still not maling a fair comparison. If he’d replace the engine in the Stihl with a Husky engine, THEN it would be a fair match..

@SGD3000 5 месяцев назад

Is the 550 your go to?

@OldSchoolMillennial 5 месяцев назад

I honestly grab both of these saws about 50/50. I usually grab my 500i for the bigger stuff.

@blkdia11 7 месяцев назад

Just try switching the chains around and not the bars, then run a comparison.

@OldSchoolMillennial 7 месяцев назад

Not possible.

@pertaani1 8 месяцев назад

how many notches are there in the front sprocket? In both model? are they the same size?

@iffykidmn8170 Месяц назад

both are 7 pin sprockets

@johnbailey2306 Месяц назад

But in all fairness they both cut wood!!!

@АлиДелиахмедов 3 месяца назад

550 марк 1 ❤

@Elsisi.sharmoot.sahyooni 6 месяцев назад

You don't push hard enough on stihl

@KaydenGonyea 5 месяцев назад

Try cutting up with it

@lise1255 9 месяцев назад

Stihl fans are as closed to any alternative as Apple and Tesla fans. Even though you beat their product every time, they will still claim theirs are the best ever 😀.

@markroberts1733 10 месяцев назад

Stihl rule ....

@kevywilliams3304 2 месяца назад

Too funny 😂😂😂😂😂

@Jeffrey-hi1ot 8 месяцев назад

The steel has more low and the bar don't have nothing to do with the chains so what you trying to prove nothing

@Hardworkpays209 5 месяцев назад

The chain and bar that came with the saw were .63 gauge (1.6mm) he got a new bar to accommodate the .50 gauge (1.3mm) chain he wanted to put on it so it was the same as the husky. If you ask me he worked real hard to get that saw to close the gap but it never happened.

@oldguyfirewood 10 месяцев назад

Good comparison. I changed my 550xp mk2 to 3/8 pitch chain and then did a muffler mod. The muffler mod really woke the saw up. I’ve got videos of those changes on my channel. Check them out if you get a chance.

@MK116Alex 5 месяцев назад

Funny. Husky videos Stihl fan boys chine in and say great saw too bad it's not a Stihl. Husky vs Stihl videos, Stihl fanboys chime in and say their both great saws you can't go wrong with either brand. Husky guys are more modest. Maybe way back in the day Stihl was the best but nowadays come on. Really, come on.

@danielsmith8659 4 месяца назад

That light 04 bar is a residential stamped steel 4 pin bearing non-serviceable sprocket nose bar….. far from “the best”…. You could have put on it…..would the rolamatic e super , 6 pin increase chain speed slightly, probably…. Would it make the stihl win in this test…. Unlikely

@FuckALLauthorities 9 месяцев назад

No teeth used on either saw, sad. Using teeth and pivot method I can do better than any of your silly times.

@chrisb9478 10 месяцев назад

Back late 2020, I originally wanted a new 261Cm & I couldn’t find any around. I found the 550 in stock at a shop in AL with a good price, plus I got the 1st Responder discount. Well, glad I bought the 550xp after all. 😁👍🏻

@OldSchoolMillennial 10 месяцев назад

Very nice! You ended up with a great deal and a great saw.

@chrisbeech4280 2 месяца назад

This is why I bought the 550 over the 261. My mind was made up on buying another Stihl, and once I started doing my homework on the Husqvarna and watching comparison videos, the choice was clear, and I have not been disappointed. Husqvarna 550xp MkII all the way 💯

@Jeffrey-hi1ot 8 месяцев назад

The husky comes out of factory turning 13555 the steals only turning 12 RPM