This is one of the best instructions I have ever had, and I’m a 65 years old EE :-) I can imagine the amounts of time you have spent making these videos. I have played with Arduino for many years, but you are the first to teach me what REALLY goes on behind the IDE. Because of you I’ll start working with STM, and you’ve already given me a flying start. But please don’t stop now ... Again, thanks a lot !
Great video. Keep 'em coming. 20 minutes, 30 minutes, 1 hour. No problem. The explanation is what matters. Beginners coming from 8-bit AVR like me can really understand the thorough, seemingly obvious concepts that you explain. Can't wait for the next one
@@MitchDavis2 Damn. Well, it's much appreciated. And just take your time with it because it also gives us (me) time to also play around and experiment with programming the STM32. Helps me learn a lot more just in time for your next revelation. Kind of like Uni. Lol
The best beginner-friendly explanation about PWM timers. For some viewers, there might be a bit of misunderstanding. At 9:25, you're using 72 MHz as example (281 kHZ fix typo), and at 19:10, you're using 8 MHz, as shown by the 31 kHz reading on the oscilloscope."
@@MitchDavis2 hi mate how about like this??? Code: htim1.Init.Period = ((PWM_PERIOD_CYCLES) / 2); Code: sConfigOC.Pulse = (uint32_t)(((PWM_PERIOD_CYCLES) / 2) * 0.6); It will working?? So no need set pwmc setphasavoltage, because global pwm duty (pulse) already set max 60%?? Or this will set all tim for 60% sir?? Any idea?? Thank u
@@MitchDavis2 hi mate how about like this??? Code: htim1.Init.Period = ((PWM_PERIOD_CYCLES) / 2); Code: sConfigOC.Pulse = (uint32_t)(((PWM_PERIOD_CYCLES) / 2) * 0.6); It will working?? So no need set pwmc setphasavoltage, because global pwm duty (pulse) already set max 60%?? Or this will set all tim for 60% sir?? Any idea?? Thank u
"PWM series to be continued :) " Last upload on this series: 2 years ago :( We give you full support to continue to the series on STM32. Please continue with the amazing series. We will be waiting for the next videos...
Dude, seriously, you have insane talent explaining things. There are no gaps of knowledge left out, you answer every question I have as you go along. Videos of THIS high level of quality is rare!!!
I subscribed instantly after seeing you do one simple thing most of the people making tutorials on this topic don't do . . . you took the time to zoom into the code. Both literally and figuratively speaking. Videos like yours would have saved me lots of heads and time when I was starting out.
Man , usually I never leave comments on youtube , but as your channel is not yet large , I want to say this first 3 videos are best of the best . Thank you very much
Thanks for the video series about STM32. Your explanations are really great. There is a typo in the calculation of the PWM frequency. It is actually 281250 Hz instead of 218250 Hz. Later on the scope shows the right duty cycle but at another frequency. Might be related to the clock configuration. This is a little confusing for beginners like me. But the video still helped me to get the PWM configured.
Hey I had a similar confusion with the frequency at the end being about 31kHz. What I think is he used the internal HSI(High speed clock) RC oscillator which gives you a frequency of 8MHz . So when you calculate the frequency of PWM you get 8Mhz/256 = 31kHz. hope this helps! (Note: You can get 72Mhz clock speed from the external crystal oscillator but you have to configure that in the CubeMX clock configuration)
This series video is a great help to those who just started using STM32, as well as those who are somewhat familiar with it without being proficient; I am the latter. All tricks learnt in operating the STM32 IDE environment are so valuable that they will save you a lot of time and energy and most importantly, frustration. These tricks and insights are bridging the gap between where I am and where I want to be. I appreciated your generous sharing of knowledge which you at one point had to put in efforts to learn yourself!
don't know if you will read this, but after days of frustration and try and error, I finally managed to get it running on my stm board. Only thanks to you. So Thank you very much!
@@MitchDavis2 Thank You for these wonderful videos. So useful. Take your time. I have subbed to you, will be sure to check it out as soon as they are out :)
4 месяца назад
I know this video is already old but I have to say I am really learning a lot from this. Thank you for taking your time to make this awesome content.
My understanding of the Auto Reload Preload is different from what you explained. By default, the timer keeps repeating. You can make it count once by enabling One Pulse Mode. The Auto Reload Preload affects when an Auto Reload Register change takes effect. If preload is enabled, it waits until the end of the current period, and the change takes effect when the counter resets. Otherwise the Auto Reload register is changed immediately, which will extend or shorten the current period. Consider if you're changing the ARR to a smaller value while the timer is running, and the counter is already larger than the new ARR value. With preload disabled, the counter would immediately reset (because the counter is greater than or equal to the ARR) and begin counting up to the new value. This means you'd have a glitch in the period, where it was neither the old period, nor the new period.
Thanks for pointing this out. I’ll spend a bit of time digging through the datasheet and doing a few tests, and if I made a mistake, I’ll call it out in the next video
Ok, I finally did my homework on this, and I definitely slipped up when reading the documentation. I've corrected this for video #4, and I'm giving you a shout out for pointing this out. Thanks again for the pointer before I went too deep in the mistake
Really precise explanation. Didn't really leave any doubts and covered all that was needed. Hope to see more topics covered by you. Keep up the good work.
wow, very nice tutorial with so much extra informations :), well done. Looking for part 2 of the timers and all the other suff you talked about... would be nice to see more about this nice content:)
One thing to think about - consider audible frequencies! Often times, the default PWM frequencies of many libraries and frameworks (including Arduino) fall well within audible frequency ranges, which very well could generate an audible annoying whine. Try aiming at at least 20kHz, more if you have small children, probably a lot more if you have pets. A few years ago I used an ESP8266 to make a wifi-connected MQTT-based RGB light, programmed it via the Arduino IDE and left all settings default. It really was an, admittedly quiet, but annoying whine until I fixed it.
If you'll ever make a complete tutorial on Udemy, I'll be the first buyer. You are incredible at explaining things. Many just tell: "set x to 255, y to 16 blah blah" and then you're more clueless than you started. You explain things and this is awesome because then I know the theory behind and I can start looking into it a bit more, and start messing around myself.
Your videos are serious business. Thank you so much for putting this together it helps a lot. I will forward this to all my colleagues at university XD
That would be fantastic. I do appreciate when people share this. I just don’t want to turn into that stereotypical youtubers that overwhelms you with “LIKE AND SUBSCRIBE” every 2 seconds
@@MitchDavis2 Your videos are of such high quality I don't even think you need to remind people to share and subscribe XD. To people starting out with STM32 your videos are just like a pot'o'gold !!!
The Zoom keys are problematic on the PC too. You can redefine them by by going to Window / Preferences then type keys into the search box, scroll down to the bottom of the list and change the defaults. Fantastic tutorials BTW, best I have found so far.
good tutorial he said it took 6 days thanks. he makes them more understandable i never realized how complicated the stm32 was need to see how to use the usb as input to computer
@@MitchDavis2 HI My name is Robert Johnson I am a retired electronic engineer in New Jersey. i want to use the the usb from the Stm32 and use it as a terminal for data from the microcontroller. I have not done a lot with programing I am 74 yrs old so when i broke in it was a different game than now. never learned C so I am getting up to speed slowly. I do enjoy your videos and i know how hard they are thanks for the response bob J