You can drag and drop your LiDAR data (.las or .laz) in Virtual Surveyor (create a new project first). Virtual Surveyor will convert your LiDAR data to a terrain automatically. When that is doen you are ready to create stockpile inventory. Let us know if you can get it to work. If not we can help you through an online demo.
Hello ... This issue is caused by a bug with AMD graphics drivers. We have workaround for that. Can you submit your question in our support system? One of our product specialists will help you out. support.virtual-surveyor.com/en/support/tickets/new
Hi! I am a quarry operator for sand & gravel in the Philippines. I'm planning to get your product. May I know which DJI Drone works with this seamlessly? Thank you
Any mapping drone will do: DJI branded or non DJI branded. A mapping drone allows you to fly a programmed pattern over your project area so that the photos overlap. You need this to produce the orthophoto and digital elevation model (DSM) which go in Virtual Surveyor for the calculations.
@@konp368 You need accuracy to get good measurements. You can achieve that with or without RTK. Without RTK you would typically need a number of ground control points, with RTK you theoretically don't need ground control points but using at least 1 is a good practice.
The accuracy is determined in your photogrammetry process (production of the elevation model). That accuracy is determined by how you fly (the higher you fly = the lower the accuracy but it will require more work when you fly low so there is a trade off). Also the ground control points you use will influence the precision. Virtual Surveyor calculates all its output based on the information you will put in...
![Stockpile Inventory [with DRONES]](/img/logo.svg){kind=logo}
