Stretching Tires 235/40R18 on 18x10.5 JDM Hella Flush Stanced 

I love his attitude, like 'Ill do it for you, but it's fucking stupid'

Had to watch again. That tube trick was the best.

this is probably the most struggle i've ever seen someone putting a tire on a wheel.

I'm running Kumho's 225/40r18 on the exact same rim. Your method seems to be the fastest and easiest way I've seen. And I like how you would still do it even if you don't like it. To many tire places here don't want to mess with it or complain the whole time.

Struggle buss , this guy in on the struggle plane, the prosess of using the tire inner tube is the safest way to air up a stretched tire and a tire that will not seat to the wheels bead. Here is a tip, flip the wheel upside down and use the tire bar and push arm and it will go on easier. Make sure you clamp the wheel from the outside, so you don't damage the face of the wheel. If the tires are directional make sure you don't have the tire on the wrong direction. I can do all 4 wheels and tires in a matter of minutes. Wheel and tire look great, that hankook is a great tire for car enthusiasts looking to stretch on a wheel. I use the the nittos motivo for daily use and the hankook for track or canyon.

Great job, much quicker than alot of guys out there

You do know that is a reverse mount wheel right?

Stretched tires isn't just about look it also has its upside to drifting it helps with with transition of the wheel going from negative camber to positive in other words when caster takes affect in initiation of drift and for those people that say this is dumb I'm pretty sure there are things that you like or do that people think are stupid too but to each his own and for the maker of this video I appreciate your time to take out to educate a safer way to doing this but it would of been nice not to bash other people that didn't think of doing this a better way let alone someone's opinion in style and as long as drifting and standing is alive there always be stretched tires so I don't think this ( FAD ) is going to be goin any where anytime soon jus like how people bashed drifting when it first hit the states hard in 05 because Tokyo drift well that was 10 years ago and there are now hundreds of drift associations and even a major series for it (formula d) so don't be alonzo from straight out of Compton cuz you will be biting your tongue when your child say hey dad can we turn off nascar and put on formula d times change and evolve and evolution is something that no can change

love how you did with the bike tube

finally a good video on it, the question I have for you, is if your tries are stretch, how much wear would be most likely be done to the tire with out camber on your car. Like for a daily driver but sitting up right with no bags and camber kits.

Awesome video! Love that bike tube method! Keep up the good work! I like to mention the real reason I stretch tires is because I drift 120 horsepower car! 😂 not only the car looks good but I can actually slide the car because I’m clutch kicking on the side walls of my tires!!!😅

Holy crap you guys take your time. Idk how many videos I've seen of people throwing tires on without using a machine within seconds and airing them up using nothing but an air machine that bursts air. Even the random Joe dirt at my local tire shop did mine with soo much ease.

good job it is the profetional way to this .best video i hav see

I love first timers telling us how to do stuff

i see a reverse mount only wheel being mounted the wrong way.

nice work peter

You guys should do a comparison of 235/245/255/all the way to 295/40/18 to see all the fitments.

Awesome video!

It's not called a reverse lip for nothing. You actually need to install the tyre with the wheel face down. Doing it like this risks damaging the tyre.

Looks good, but GEESH....what a process.

That is a great idea using the bike tube!

Reverse mount or not, that was the dopest way to stretch the tire! How do you know what size tube to use?

Hi.i just got 18x8+35 front and 18x9+35 rear.which tires should i get.i want a little stretch but not too much.just 2 get awesome look.help would be appreciated.thanx

For those asking, if you have a 17" wheel buy a 17" bike tube, 18 for 18 ect. Be sure to lube the bead, tire and bike tube so it's easy to remove after you get the bead moving. We do it this way every time and it's by far the safest and best method to mount stretched tires.

You mounted that thing from the wrong side son. That"s why it was such a struggle and why you had to cram the arm so deep to get to the drop center. That wheel is supposed to be mounted face down.

JUST PURHASED 2 NEW FRON TIRES Geotrac patagonia AT ROWL 245/65R17 AND I DONT SEE ANY MARKINGS FOR DIRECTIONAL OR NON DIRECTIONAL SOHOW DO I TELL WHAT THEY REALLY ARE?

Would this be the same tire size for stretch on 19s if I’m running a 19” 5x114.3 ?

i run stretched tires on my s14 and its a daily i push my car to its limit all the time around corners never once broke loose had this car for 4 years now

what about a 235/40ZR18 on a 18x9.5 the stretch isnt as much as that but i dont want any problems

What tire size would you recommend for those size wheels. Also good work on the mounting. Taking your time and playing safe is better then rushing and endangering yourself or others :),

i have the same style wheel 18x9.5 with a 255 30 18 can the stretch be done on thst size ?

I like the bicycle tire to take up the space what size bike tube are you using

I'VE SEEN STRETCH TIRES LIKE THIS ON A NICE CAR DOES NOT LAST LONG- BLOW UP, DESTROYS THE WHEEL, FENDERS & SUSPENSION. VERY EXPENSIVE REPLACEMENTS & REPAIRS.🤑

Good tips

Was the tyre still clamped when inflated? Must of been quite a struggle getting that off

as someone who works at Discount Tire, it should not be that hard to put that tire on the wheel. But also i find these videos oddly satisfying.

ive stretched 4 nankang NS-20 tires on the same exact wheel and they didnt have to use the cheetah at all, they just mounted and aired up the tire. i guess it's all about having a good stretchy tire. havent lost any PSI since the day I mounted them either

very good

.-. Yo trabajo montando neumáticos hasta prefil 35 y no es tan difícil.. pero en la forma en lo que lo haces puedes rayar una llanta o rajar las pestañas del neumático

Wow great info...

Hey what tires would I use to stretch onto a 18x7?if possible lol

I'm getting Toyo Proxes for my F1Rs and discount tires won't mount them bcoz the rims are 15x8 with 0 offset. Toyo sadly only seems to fit 15x7.5 maximum. I'm gonna request those who will stretch tires this method!

would you suggest a 215/45 R17 on my 17x7s?

got a debeaded andrew fin. that im gonna fix.ty!

nice tricks

This is for the content creator and any one who looks at the comments. This is definitely the wrong way to mount the tire in question on the rim in question. The rim is in fact a reverse mount rim; meaning the tire should be mounted from the reverse side of the rim. I would also recommend clamping the rim from the outside with rags between the clamps and the rim. I know these things because I do this kind of stuff on a daily basis.

Never the less awesome technique..

The tire has to be mounted from the rear on this wheel model

So much hate on drifting and stretching out tires. But you still make a video on it, idgi.

I was at a garage recently and they blew my tyre on with an air cannon he had it in one go.

Awesome!!!

What would be the proper tire size for my 18x9.5 wheels on my 2001 Mustang

this tire isnt really all that stretched. it actually is the right size if u want it to look good. most people stretch it way to much.

hello came across ur video im kinda unsure on a decent stretch for my wheel i have aside cuz im not sure i have a 15x8 +25 avid1 av-18 and idk wat tyre i should get with out rollin my fenders i was thinking 185 45 r15 but i still undecided

If you flipped that rim over to the face down you would have been able to put that tire on a 100 time easier

what as the offset for these 25mm 35mm

everyone bitching about how much of struggle that was.. but honestly its the easiest I've ever seen it done, took 6 hours to do mine lmao

can anyone tell me ,which alloy is this❓

i find that hard to believe. just did a set of xxrs with the same width wheel and 225/40/18s. and if your saying its not a reverse mount wheel, how do you expect to remove the tire in the future the same way you installed it? the drop center being that low down would make it easier to install and remove the tire from the rear of the wheel.

What size tube did you use?

I'm running this same wheel/tire combo on my ES2's! Lol

What size bike inner tube u use?

What size inner tube did you use? And do I let air out the inner tube at the same time as I put it in the rim??

This should be a video about how not to mount a tire

Respect!

it's funny because the tire shop near me replaced all 4 corners with mild stretched tires (245/40 on 10.5) in 30 minutes.... that included removing the old tires

No lubricants?

Why not just get some super low profile tires? i mean they are pricey but less expensive than getting new tires every other week and likely new rims at the same rate.

I have 235 40 r19 will it fit on 19x9.5

What brand on rims

*please reply back if you are still avialable for replying to question.

HELL YEAH MAN

ImageInMotion; While I have never worked in a tire shop, I have changed a lot of tires in my garage with a Harbor Freight tire changer as I do a lot of patching on "off road use" tires, that tire shops will not touch. I have also assisted in changing tires on Pro Rally Stage cars when I was working as pit crew. Those Rally tires are very heavy construction with very stiff sidewalls. Stubborn ones can take a LOT of bead lube or silicone spray lube and 125 psi before they will think of seating. I am excited to try the inner-tube trick next time I have a stubborn bead. I respect that you may have a lot of experience mounting tires, and agree with your stated concern for damaging the bead of the tire. This being said, please look about half way down on this page from Tire Rack. This shows exactly what others have said, several times about reverse mounting wheels. www.tirerack.com/tires/tiretech/techpage.jsp?techid=314

What size inner tube is that?

How long have you been working with tires. Because if you know how rims work at all. Your doing this wrong

easiest stretch I've ever seen

pretty sure that tire goes on threw the bottom B, i too work in a tire shop and when it has that lip like that its from the bottom

What are the models of the wheels

Reverse mount? Or am i just uninformed?

You'd be struggling to find a tyre shop in Australia game enough to do this. Laws must be a bit slacker there I assume. Not to mention the safety aspects.

Its a reverse mount wheel. That is why he was struggling so much. just flip the wheel over.

Next time turn the rim around and mount it facing down it would've saved you a lot of energy the lip on the front side is to big to mount like that, I'm surprised the tire didn't rip, good job airing it up

And a 235/45/18 on 10.5" isnt that bad try like a 215/45/17 or 205/40 on a 10" wide wheel!!

damn I went with 265/40/18 on 9.5 wheel and 245/40/18 on 8.5 wheel. I regret it now it does not look that good, going with 245/40/18 on 9.5 and 225/40/18 on 8.5 I think it will look much better)

that was cool....anybody has a hard time putting a wheel that is not a big deal.....thats a clean way to do it....not like the circus of guy spitting flames and crap....

next time try with the alloy upsidedown should be 100% easier

bro real people who know how to put tires on do lease than a 1 min plus u mount that wheel the other way

youre not very good at mounting tires

Wheels are revise drop flip the wheel over and you'll have no problem putting it on

ke manco..despues de tantos años cada vez ke veo este video me parto de risa..haha jajaaa..y la voz ke pone para explicar...parece un profesional...como tantos ke hay por ahí...jajaja..ke risa!!!!

Nice dude but I still want it lol

Every time I've done a low profile I let some pressure off the hydraulic arm(not all the way, leave some pressure so it doesn't come back off) and it spins the rest the way on every time.

you know that's a reverse mount wheel?

Over 4 years and still didnt realize he did it wrong way. Tyre was probably damaged when stretched from the wrong side. That is not what tyre stretching means.

Ke manco!!!

PROPER

That's a reverse mount rim flip it over next time the tire will practically fall on instead of ripping or stretching the bead

No one notice how he put the wheel “rim” wrong on the machine it’s a reverse mount wheels

Because that size is easy to stretch. 225-40 on a 10 is almost effortless. 225-40 on a 11, we can't about difficulty on that one.

Nice stance boy tires lol