Stripping Paint off fibreglass - Full Tutorial 

Thank you for the video I just bought a 86 Corvette which is my birth year and it has cracking paint all over it ... This will help me restore my new baby faster then the other videos I just watched ...

Me: Damn why would you need to strip this car??? Me 10 seconds later: Ooohhh.

AMAZING STUFF. WOW😲😲😲

glad i found this as i need to remove old paint off my bodykit so i can start making it fit on my civic as its from a accord

Wow that's probably one of the most beautiful cars in there🇺🇸👍

Can you put it on and pressure wash it off gently instead of steel wool

Using this method to restore my pontiac Formula

I was taught to never use a chemical stripper on fiberglass because it causes the fiberglass to delaminate and react.

I’ve literally just used a sander on 80 grit for 70% of my boat.. now I’m watching this from Australia 😂

Did this only remove the base coat? It looks like the high build primer was left behind.. how does it remove a polyurethane clear without penetrating a urethane based primer?

But may I ask why you tapped the rest of the body off if your going to strip it as well?

Thank you so much , my problems solved

I have a 64 Corvette instrument housing made of pot metal and was sprayed with silver then black satin lacquer from the factory. With minor variations all 63-67 Corvette instrument housings and glove box doors were made and finished this way. Also, the console cover plate was made and finished the same way except for the color. All three items, instrument case, glove door, and console have a camera case grain pattern. As far as I know the silver is not a primer but may have had an etching property to it as it was applied over chrome plating. I and many others have tried multiple brands of chemical striper, lacquer thinner, acetone and DOT 3 brake fluid. I have been able to remove 75 percent of the black lacquer but zero percent of the silver lacquer. Given the track record of the above products I have doubts about another product being able to perform where the others failed. My questions, 1. what colors or type of paint will your product not be effective at removing? 2. Why is the base primer not removed as well? and 3. Will this product affect plastic body filler commonly referred here in the states as Bondo. Any information or insight would be helpful. Thank You

Will it safely take paint off an acrylic car that has been painted - a Bricklin ?

Simon, what did you use to plug holes so striper wouldn’t run inside the bonnet? Masking tape and …?

how do you handle vertical surfaces on a car?

It would help more if you sanded it with 180-220 to "break" the clear coat. That way the stripper can cut down further, faster...

If you did have paint on fiberglass and there was gel paint underneath it would it hurt the jel paint

Do you have a customer service contact person to ask questions?

Can this be used on an old fiberglass camper? (1981 Perris Velley)

Also would the stripping pack a be enough to do this entire car?

Have you had any problems when using this on fiberglass.

What does it do to plastic filler

What type of paint was on the corvette; lacquer, enamel, urethane?

What is the company name of the stripper?

So is it true these cars never had a jelcoat from factory? If so how come everyone assumes they did?

Does this work with the old lacquer paint as easily as the base coat clear coat paint?

Can it be used on fiberglass swimmingpools?

Is there a link to your products?

We recently bought a Dodge B250 extended van with a fiberglass topper, and have discovered many leaks in the fiberglass top. It has been painted with what appears to be automotive paint to match the van paint job that has started flaking up in some spots and has many cracks. I am looking into removing the paint so we can reseal the fiberglass with fresh fiberglass, to make it stop leaking. How much of this product would we need (approximately) to complete the paint stripping? I would prefer to keep cost as low as possible, so I was considering the Pack A to do the job.

Hi I have a 1983 tvr280I at home and the paint is kaput on it can I use the same thing that you use on your corvette and where can I buy your products in Canada? Thank

what plastic sheet do you use to mask off?

Is this safe to use on SMC panels

Have you had any issues sending the product to the USA and will one pack do the entire car?

Hi I have a C3 that I would like to strip completely, about how much product would it take and what is the temperature range that I can work with.

How long do I need to let it sit? How long did it actually take you to do that hood?

Does this also remove the gel cost from the fiberglass?

Those who complain about this technique, simply don’t clean up very well afterwards.