Stroboscopic Effect 

I want to say that the animation and the sector disc look very impressive under pulsed lighting, but this is not conveyed in the video, it needs to be seen live! Therefore, you can print discs using my links. And also make flash lighting. In addition to the generator, you need LEDs (I used 8 pieces of 3 watts each) and a control transistor (I used IRFZ44N). Connection diagram - ibb.co/zJ1JZcK

This should have been taught to you as a child. How old are you now (if you don’t mind me asking…?)

@@alitlweird the school I went to was centred around religion D: I am 30

I didnt get that

Certainly. I used this motor with a gearbox for rotation - aliexpress.com/item/1005006828526427.html And such a ready-made PWM - aliexpress.com/item/32835541668.html LEDs need to be connected through a powerful transistor, I recommend using IRFZ44N - aliexpress.com/item/1005005801525204.html It is designed for high currents, when heating, use a heat sink. Connection diagram - ibb.co/WcJrc5S The best quality is with the shortest pulses, i.e. 1% duty cycle, but this makes the illumination weak. Therefore, it is better to take more powerful LEDs, I used 3-watt ones, but I don’t remember how many, about 8-10 pieces. You can take 5-10 watt ones to sleep them together for the required power. If your object is larger than mine, then it is better for you to immediately solder a group of LEDs at a higher power of 50-100 watts. Because they will illuminate in short bursts, ideally 1% of their total power. I wish you success in your creativity!

That's right, you need a flashing light and preferably with the ability to change the frequency and duty cycle. I used an inexpensive generator, it has both. The shorter the light pulse and the longer the pause, the better the effect. But the shorter the light pulse, the more powerful it must be. Here is the generator - aliexpress.com/item/32835541668.html Or in the body - aliexpress.com/item/32950074641.html

How about the word “stroboscopic” in the title? A bit implied don’t you think?

Thanks!

Thanks, I'm sorry, but I deleted a lot of old videos that didn't give views. Videos with a Tesla coil, including simple circuits, are full on RU-vid and on the forums. There are forums specializing in Tesla coil and other high voltage toys. But I plan to make again a video with high-voltage experiments, I also ordered a Tesla coil from aliexpress, it makes no sense to do it myself.

Today, YT is already full of Tesla coils according to the more advanced DRSSTC and QCW DRSSTC principles, the length of the discharges of which exceeds the length of the coil itself. I'm not even talking about the fact that they have a built-in music channel + they have music reception via bluetooth. But a diagram of what I was doing is here - ibb.co/1G1TP5F This is already a kindergarten today. 😉

@@grain-diose Please Can You again Make A Video On The Old Video Like In Which You showed a Tesla Coil With J13007 Transistor Which Emits Sparks Also 👍🏻

OK, I just uploaded the old video to the test channel - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3ygLP7R5QO0.html

@@grain-diose Yessssss Thanks Grandpa 🙂❤️

yes :)

Is the gravity wheel a perpetual motion machine? Are you familiar with the Law of Conservation of Energy?

But I liked the video

This is the noise of the gearbox. Thanks!