Structural Welding 3G SMAW | Practice Makes Perfect

Подписаться 13 тыс.

Просмотров 15 тыс.

50% 1

been out of the loop for a while guys. I'm just a normal human with normal human behaviors, but to say the least, we are back!!! In todays video we are welding some 5/8" carbon steel plate with a v groove in it. We are going to get a root in there with some 6010+++ and hot fill and cap with some 7018. Hopefully you guys enjoy our video. Please dont forget to like share and sub to our channel if and only if you find this useful and or entertaining. Feedback is always welcomed. Thank you guys for viewing. Peace!!

Хобби

Опубликовано:

12 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@lafierasgamefarm258 2 года назад

🔥

@OVERCAPITALIZE 2 года назад

Weldervlog over weldlab, weldsnmore, and weldtube. 💯

@VantageWelding 2 года назад

There is no competition 💪. They are my brothers of the trade. 💯🤟. Thanks for watching

@OVERCAPITALIZE 2 года назад

@@VantageWelding yessir. just these videos a lot better !

@VantageWelding 2 года назад

@@OVERCAPITALIZE I appreciate you bro, but in my humble opinion my video quality and recording techniques are sub par. 😅😂🤣😂

@armandocontreras4069 2 года назад

✊🏼

@chuymiranda1 2 года назад

332 lohy is my favorite!!!

@VantageWelding 2 года назад

Mine’s a crisp 5mm arc80 😂

@Weldinginlove Год назад

Good experience weld 👍👍

@VantageWelding Год назад

Thank you

@jorgetoledo7588 2 года назад

can you show us how you built your roll out wheel ?

@VantageWelding 2 года назад

I got you

@ranchroberts5976 2 года назад

Can you give some pointer on when you get to the end (top) of the plate? When I get there the bead becomes violent and I can't seem to continue the pace I had kept from the bottom up. My welds look good up until the last inch or so lol. Sorry if I didn't explain clearly

@VantageWelding 2 года назад

You did explain your self well brother and actually I know exactly what you are talking about. If you are using backing plate, use one longer height wise so your heat doesn’t stop on the plate but rather on the backing plate. Always remember heat travels up, therefore the top of plate will be the hottest. By making the backing plate longer, it will disperse the heat away from your plate! Hope this helps

@ranchroberts5976 2 года назад

@@VantageWelding I dont use a backing yet. Its just practice on a L shaped, 3/8" thick , 7 inch piece of metal. I'm using 3/16" 7018 electrodes. I'm running DCEP at 108 amps.

@VantageWelding 2 года назад

@@ranchroberts5976 3/16 rod is too big and too low of amperage for 7018 brother.

@ranchroberts5976 2 года назад

@@VantageWelding Hey dude, just an update. So I found a solution to my problem. To anyone having this same problem, I guarantee this will work to finish your weld straight without any extra buildup at the top. So depending on how much rod I have left, I switch to a new one for the final 2 inches or so. I then use the "old rod" to begin my next weld and used the "new rod" to tie in and finish that one. Point is, use a new or still pretty long rod when finishing the weld on the 3G position.

@VantageWelding 2 года назад

@@ranchroberts5976 hood stuff bubba