Struggling to Tie Your Own Rigs? ➡️ This One’s Easy and Reusable!

Подписаться 42 тыс.

Просмотров 166 тыс.

50% 1

This multi rig gives you the benefits of the blowback rig, the slip-D rig and the multi rig without any of the downsides.
Through my experience as a fishery owner, I see many anglers struggling to tie their own rigs and if you are fishing a venue with a hard gravel bottom then a ready made rig will be useless after just one cast. This rig is a variation of the multi rig so it’s really easy to tie and re-usable. You only have to master one knot: the overhand loop knot. Unlike a traditional multi rig, it’s made with braid so you can easily put it into a solid PVA bag and you'll get a good presentation over a wide variety of bottom types even if you’re not a great caster. You can use the material time and time again and spend your money on the most important items in any carp angler's tackle box: the hooks.
Also from CARP FISHING EXPLAINED:
1️⃣ How long should my carp rig be? • When to Go For Short R...
2️⃣ New twist on the classic hair rig: • BOOST Your Hair Rig Wi...
3️⃣ The Shock & Run rig: • I Cut the Leg of a Lea...
⏰ Timecodes
00:00 Introduction
00:22 Rig materials
00:45 How to tie the rig
06:14 Why I like this rig
09:26 Lead setup
10:39 How does the rig work
12:05 How to fish this rig
13:06 Where to fish with this rig
🐟 What I use for this rig:
Armourlink braid: amzn.to/3AsEjzQ
Chod twisters: amzn.to/3e6V38t
Nash pinpoint LED eye glass: amzn.to/3ASNMlv
Tungsten hook bead: amzn.to/3RbgmUq
Blow out tube: amzn.to/3CCQtJ1
Tungsten hook beads: amzn.to/3RbgmUq
Cling-on tungsten putty: amzn.to/3ApI0Xb
Medium shrink tube: amzn.to/3e42Y6v
Boilie needle: amzn.to/3PZMysZ
Scissors: amzn.to/3QZsVmc
Magnetic bivvy tray: amzn.to/3pNUqDe
Subterfuge work box: amzn.to/3ASyn4J
☎️ Connect with me:
Filmed at my lake, Beausoleil Carp and Cats: www.frenchcarpandcats.com/
Facebook: / matt.collins.148116
Twitter: / beausoleilcarp
IG: / matt_collins_carper
Tiktok: / matt_collins_carper
🙌 Support the channel:
- Hit the THANKS button in any video!
- Use this Amazon affiliate link (UK): amzn.to/3TbvnaF (Purchasing through these links gives me a small commission to support videos on this channel - the price to you is the same)
🔔 Subscribe to the channel:
ru-vid.com...
This channel is supported by Nash but I am totally in charge of the content and focus of each video which is all about helping anglers. I only use and recommend products that I personally use in my fishing and that I am completely confident in.
#matthewcollins #carpfishingexplained

Спорт

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 291

@matthewcollinsangler 2 года назад

If you struggle to tie your own rigs or you want to move away from ready made rigs, this one is for you. It's based on the multi rig so it’s easy to tie and you can re-use the material time and time again and just change your bait and your hook. Unlike a traditional multi rig, it’s made with braid so you can easily put it into a solid PVA bag and you'll get a good presentation over a wide variety of bottom types even if you’re not a great caster. Anglers at Beausoleil have been using this rig for the last 2 years and everyone’s got on very well with it. It’s caught some amazing carp from the venue and it’s helped anglers keep their fishing simple, effective and reliable.

@yorkshirebanktramp7879 2 года назад

Thanks for yet another easy to follow video Matt. They really are a joy to watch. Any tips on targeting elusive Commons👀

@matthewcollinsangler 2 года назад

@@yorkshirebanktramp7879 Hi mate, well, I have something for you. Our big common avoided me for years and I made a specific change which increased my success rate with the commons. I talk about it in this video at this point: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YfIy3Kds49Y.html Basically what I did was to shorten my rigs from 8-10 inches to 6-7 inches because commons are a different body shape! Food for thought I hope 😉

@yorkshirebanktramp7879 2 года назад

Thank you Matt - certainly food for thought with the shorter hook lengths.

@CustomWebbers 2 года назад

thank you for this. my liners have decreased and hookups increased. can tell a huge difference. appreciate this and your work

@matthewcollinsangler 2 года назад

That's great to hear mate, thanks for the feedback, means a lot 😊

@davidhill9375 2 года назад

Best carp info on here… no slo mo, no shots of trainers stepping out of the van, no competition against your other so called “ pro angler”… just proper info 👍👍👍

@matthewcollinsangler 2 года назад

Hi David, thanks again for the support. Great to hear! It's all about sharing the knowledge here 😊

@WestysAngling Год назад

Great little tweak to this rig Matt 👍🏻👌🏻 you are one of the main reasons I started my own channel. You have brilliant high quality educational videos.

@matthewcollinsangler Год назад

That's great to hear mate, thanks! All the best with it 👍

@kiakings5442 7 месяцев назад

Hello Matthew, I was never “convinced” of a running lead didn’t think it would “hook” the fish right. I took a gamble this week and assembled this rig, easy, and used a 87gram inline lead and what happened I caught 2 big carp on it bottom bait style and they were nailed!! I am convinced! Funny that both takes were violent but after that the fish moved like a bag of cement until near the net lol😅

@matthewcollinsangler 7 месяцев назад

Hi mate, well, that's great to hear and congrats for having the faith to give this rig a go. The takes on running rigs are phenomenal! Glad the rig worked for you and well done on your captures. If you haven't seen it, one of my recent videos explains exactly how running rigs work: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ckzalwJuh0c.html

@kiakings5442 7 месяцев назад

@@matthewcollinsangler make that 3 takes :-)

@kiakings5442 7 месяцев назад

Make that 5 takes blimey brilliant packed up now on my way home great week 9 carp to 48lbs

@kiakings5442 7 месяцев назад

@@matthewcollinsangler yep seen it and understood the running rig there is interesting without being attached mmm slip D inline for now lol

@craigedwards3150 2 года назад

I think this is the ultimate waste saving rig , been using it a while now just with a kicker over the eye, great video as usual

@matthewcollinsangler 2 года назад

Thanks very much Craig. Ah yes, a kicker is a great option too!

@MarkSexton887 2 года назад

Thanks Matt.once again 👍🏻🙏😊

@matthewcollinsangler 2 года назад

Thanks Mark, glad you enjoyed this one!

@TheBrand83 2 года назад

Another great, Informative video. As always. Thanks again Matt.

@matthewcollinsangler 2 года назад

Thanks very much mate, much appreciated 👍

@jasonmayo5960 Год назад

Thank you for the quality content you provide it has greatly improved my angling.

@matthewcollinsangler Год назад

Wow, that's great to hear mate, thank you! That's what I hope to do with each one 😊

@nigelmitchell5618 2 года назад

Brilliant Matt, the explanation and detail is really helpful. Thanks 😁

@matthewcollinsangler 2 года назад

That's great to hear, thanks Nigel 👍

@Trailtraveller 2 года назад

Thanks for sharing !

@matthewcollinsangler 2 года назад

No worries, my pleasure 😊

@teles81 3 месяца назад

I’m glad I have discovered your channel! Really great info and good camera work. No nonsense straight to the point and you are really nice to listen. Thank you for sharing your knowledge to us! 🙏🏻

@matthewcollinsangler 3 месяца назад

That's really wonderful to hear, thank you 👍

@Big_Old_Bondy 2 года назад

Thanks Matthew, Iv'e been trying different rigs out for a while and definitely gonna add this to my arsenal. My current favourite is Mark Bartlet's corn rig

@matthewcollinsangler Год назад

Have fun!

@thegreeneyedcarper7077 2 года назад

Good way of thinking very good rig can't wait to try it out thanks

@matthewcollinsangler 2 года назад

All the best with it mate, I have total confidence in it 😊

@dannyboy3281 Год назад

Matthew would like take this time to thank you for your uploads it's much appreciated and you have improved my fishing and now seeing bigger and more regularly fish on the bank 🎣

@matthewcollinsangler Год назад

Wow, that's really special to hear, thanks very much, means a lot and I wish you continued success!

@always0n145 Месяц назад

Thank you Matthew for helping with my struggles with rigs due to my rheumatoid arthritis you are a true gent sir ❤

@matthewcollinsangler Месяц назад

My pleasure mate and all the best with your fishing 🎣

@DanieHattingh Год назад

This one has everything I want. I'm definitely tying a few of these.

@matthewcollinsangler Год назад

Great to hear mate, all the best with it! 🎣

@darrenfowler8308 2 года назад

Great video again Matt. I was a big fan of Kevin’s original blowback rig from the first time he showed it on a dvd. Used it for years. The combination here of that,the slip D and multi is definitely one I will be trying. Having baits ready to go with the mono loops is a great advantage. My club lakes you can end up getting hammered by bream at times so this combination of rig and bait attachment is perfect for quick,easy changes of hook and or bait. Many thanks again for all your excellent tutorials.

@matthewcollinsangler 2 года назад

Hi Darren, great to hear from you. Glad you like the ‘combo’, I can totally see how a rig like this could be a big advantage on a water where you are having to fight through the bream. You can also use it with bait screws of course which I’m using more of in my fishing nowadays. Hope that you get on well with it. Cheers, Matt.

@thereeldeal1 2 года назад

Love the way you explain the mechanics of the rig and not just how to tie it. 👍

@matthewcollinsangler 2 года назад

Hi mate, thanks very much for the feedback and support. Glad you like what we do. The “how” is easy but we like to focus on the “why” so that anglers can make the right decision for their fishing 😊 All the best in your fishing, Matt.

@daz4643 Год назад

Thank you Matthew, I made a few of these rigs up at home ready for this weekend. Needless to say I'm sat here on the bank and I have landed two fish. I lost a bit of confidence in my fishing before this. You have helped loads. Inspiration is the word 😃 I even went and bought a hook sharpening kit. How easy do we overlook these things! Once again Thanks.

@matthewcollinsangler Год назад

Hi mate, great to hear that, thanks! Glad this rig is giving you more confidence, keep changing the hooks and keep catching! Cheers, Matt.

@terryweight9949 2 года назад

great vlog Matt, always tie my bait on and blob but what a simple and great idea using mono, many thanks for that tip it never crossed my mind, take care and tight lines

@matthewcollinsangler 2 года назад

Great to hear Terry, glad you like the tip, enjoy!

@nickstone4973 2 года назад

Great video again. Tie all my own rigs now after watching your videos. So well explained , thank you

@matthewcollinsangler 2 года назад

Ah, that's great to hear Nick, glad you're enjoying tying your own now 💪

@sahidibahar4196 2 года назад

Thank you for creating such great videos they are a pleasure to watch. 😊

@matthewcollinsangler 2 года назад

That's great to hear, thank you!

@PaulZ1300 2 года назад

That’s a great twist on the slip D rig Matt, definitely going to give it a go. I think I’m getting done regularly but can’t always tell, this should help enormously. Thanks again and tight lines 👍

@matthewcollinsangler 2 года назад

Hi Paul, great that you see the potential in the rig. If you can get a nice fit between the inline lead insert and the lead then you can add a 2nd 'tell tale', just tie some floss on the swivel and tuck it up inside the lead. If the floss is out, then you’ve definitely been done 100%. Using a brand new razor sharp hook every cast makes a massive difference. This for me, is the biggest edge that many overlook. Sharp hooks are harder to eject and with double confirmation of whether you are being done you should be able to prove this to yourself. If your’re casting then I would recommend you fold the rig into a solid PVA bag to guarantee it lands right 100% of the time. Enjoy, Matt.

@AndrewLomax80 2 года назад

Always check your hooks too mate that could be why you are losing fish

@horstelvis83 10 месяцев назад

Thank you for your thoughts and idea behind this rig! One word: awesome! :-)

@matthewcollinsangler 10 месяцев назад

Cool, thanks mate 😊

@goonernumone8444 2 года назад

Hoping yr place is fishing well & normally service has resumed Matthew- so many new anglers here in the UK (It's crazy) of course I share knowledge & help bankside but I refer them all to you to watch- great simple but effective content 👏👏👏👏 Lee

@matthewcollinsangler 2 года назад

Hi Lee, nice to hear from you and thanks for asking 😊 All is good at Beausoleil, very happy to have anglers on each week making great memories! Thanks very much for recommending the channel, I get lots of great feedback from anglers new to the sport and I'm always happy to share my knowledge 🎣

@leovanopstal5861 6 месяцев назад

Hello Matthew, I recently spent a week fishing on a public water in France. It soon became apparent that I had to look for the fish further away in deeper water. I then switched to spodding and used the very easy blow back multi rig in combination with solid PVA bags. I had 16 bites and also caught 16. I would like to thank you very much for your tips, they are very useful. Greetings from Leo from the Netherlands.

@matthewcollinsangler 6 месяцев назад

That’s wonderful to hear Leo and congrats on a very successful session 👊

@robgreenwood4857 2 месяца назад

Thanks matt brilliant video as usual please keep them coming

@matthewcollinsangler 2 месяца назад

Appreciate that mate 👍

@martinmitchell2210 Год назад

After watching the video Matt, I changed to this set up with a wafter and my loss rate went down considerably. Wife loves how simply the rig is and how effective. excellent Vid.

@matthewcollinsangler Год назад

Thanks very much Martin, great it's working for you! Changing the hook after each cast is what makes a big difference to the catch rate 😊

@mattyctill 2 года назад

Brilliant video again Matt

@matthewcollinsangler 2 года назад

Thanks Matthew, glad you enjoyed it 👍

@paulgosling1961 Год назад

Apsalootly love the loop idea for mounting the bait .

@matthewcollinsangler Год назад

Hi Paul, glad you like that trick. There’s a more advanced version of that trick in this tik tok video where I worked out a way to bury the blob so do check that out if you’re on the platform. Here’s the link: www.tiktok.com/@matt_collins_carper/video/7080557051017022725?is_from_webapp=1&sender_device=pc&web_id=7079073014067529222 Cheers, Matt.

@JoffreyVerkadeNietVanDeKoekjes 7 месяцев назад

I didn't know about this ring replacement trick you did with the bait. Thanks!!!

@matthewcollinsangler 7 месяцев назад

Cool 😊

@stephencohen111 2 года назад

Love it, nailed it on this top video 👍👍

@matthewcollinsangler 2 года назад

Thanks very much Stephen 👍

@adventureswithfrodo2721 2 года назад

I had tied multirig with braid but always thought this suxs as it just collapsed so easily. But as most carp rig components are not available in the USA. After watching this I di this using use a small piece of coffee stirrer. Really like your videos.

@matthewcollinsangler 2 года назад

Yes, I’m sure finding the right bits is a real challenge in the US. If you could use a small rubber bead and pierce it crossways with a sharp needle, that would also work. Plenty of options :)

@DaimoSparrow 2 года назад

As always Matt thank you for the brilliant video quality & easy to follow guide, with close ups, this is perfect for me having 1 eye (no retina in right) & struggling especially on the colder days with Raynaud's 👍

@matthewcollinsangler 2 года назад

Hello mate, thanks as always for your amazing support. I understand how you can struggle with rig tying in that case. Nowadays I try to do all my rig tying in the warm and dry and take the rigs ready to go for the session. I find I struggle nowadays when I’m doing winter sessions. My hands start to seize up! All the best and I hope you get on well with this setup. Cheers, Matt.

@felipfelop8220 Год назад

Daimion,you could maybe try the lifesystems reusable hand warmers,after there done you drop them back in the kettle,it works a treat for reynauds,about a fiver for 2 i believe

@DaimoSparrow Год назад

@@felipfelop8220 Thank you, im going to order some 👍

@savintango 2 года назад

Great tutorial once again. Deco gunna give this a go. Cheers Matt

@matthewcollinsangler 2 года назад

Cheers Mark, have fun with it!

@Jelle1970-nk5xw 8 месяцев назад

Thank you for this great how to.

@matthewcollinsangler 8 месяцев назад

Glad you like the rig 😊

@RADDY1993 2 года назад

Great vid m8, this looks right up my street. Easy knots and no fiddly swivels or rings :)

@matthewcollinsangler 2 года назад

Bang on, that's why it's been very popular 😊 Enjoy mate!

@thecowboycarper Год назад

Top Man 👍 keep up your amazing channel Matthew 👊

@matthewcollinsangler Год назад

Thanks very much mate!

@hooksharpening9104 2 года назад

Great rig!!!

@matthewcollinsangler 2 года назад

Thanks mate 😊

@horstelvis83 10 месяцев назад

I tried it this weekend on a helicoper setup - 20 cm hook link - here my statistics: Losses: 1x, Know when I am done: 3x (so GREAT), Fish & all hooked in the bottom lip: 4x. It really helps having a dyneema leader instead those melting very smooth ones. I fished it with crank choddy and crank x from Korda. worked for both when the loop sleeve is a bit longer (till hook point) for having a larger hook loop. Thank you so much for this rig! :-D

@matthewcollinsangler 10 месяцев назад

Great to hear, glad you’re happy with it! Personally, I wouldn’t choose this rig for a helicopter lead system as supple braids are prone to tangle. This rig was originally designed to be fished with an inline running lead inside a solid PVA bag. This creates a tangle proof presentation that the carp find difficult to deal with and should reduce the number of times you’re being done 😊

@horstelvis83 10 месяцев назад

@@matthewcollinsangler thx again for your point of view. Yesterday, I watched some more videos of your channel and the running lead setup is the next step. Since I am really fan of the helicopter rig when fishing new locations, do you have a recommendation which rig will be working best in your eyes?

@matthewcollinsangler 10 месяцев назад

@@horstelvis83 To decide between a running rig and a helicopter rig, I make some casts with a leading rod and feel the lead down so that I know what I’m fishing over. As long as I get some kind of drop, even a soft one, I use a running rig. If I can’t feel much of anything at all, I’d use a solid PVA bag instead of a helicopter rig, personal preference 😊

@LLCoolPeas 2 года назад

More top content Sir. Especially loved that little shot across the Oak at 8:09. Ohh the memories...

@matthewcollinsangler 2 года назад

Thanks mate! Yeah man, good times and good chuckle (at my expense, but hey, whatev 😂)

@LLCoolPeas 2 года назад

@@matthewcollinsangler I was being genuinely sentimental this time around, but yeah... that's the spirit mate🤣🤟

@dx13dox 2 года назад

Great upload Matty as per usual.

@matthewcollinsangler 2 года назад

Thanks very much mate, much appreciated 😊

@dx13dox 2 года назад

@@matthewcollinsangler np mate I used your rigs on a French lake and bagged myself a 56lb mirror. So defo np.

@matthewcollinsangler 2 года назад

@@dx13dox That's awesome mate! Congratulations :)

@rudebwoy6570 3 месяца назад

Just tied one of these for the first time and it took me 4 mins , only going to get quicker and being able to change the hook that fast is very efficient for those cold days on the bank when your hands are like ice , love the vid , thanks mate 👍

@matthewcollinsangler 3 месяца назад

Brilliant to hear, all the best with it 👍

@AndrewLomax80 2 года назад

Been using your multi rig for over 12 months and still used it today at Partridge fishery, bagged me 2 nice commons and a mirror using a bottom bait. Will definitely give this a try too. Thanks as always Matt 👍

@matthewcollinsangler 2 года назад

Great to know that rig is doing the bizz for you! Have fun with this one 😊

@AndrewLomax80 2 года назад

Cheers mate, keep em coming

@aarondavies8486 Год назад

The claw nash hook is all I use now best hooks out there

@clivelogsdon1492 2 года назад

Nice variation

@matthewcollinsangler 2 года назад

Thanks Clive, hope you give it a try 😊

@clivelogsdon1492 2 года назад

@@matthewcollinsangler just made a couple up

@babamoizuddin4906 Год назад

Good one bro👍👍👍

@matthewcollinsangler Год назад

Thank you 😊

@babamoizuddin4906 Год назад

@@matthewcollinsangler cheers 👍

@banditfishing1558 2 года назад

With this rig I use a wide gape style inturned eye hook and a pre made kicker to hold the loop In place. A bait screw to hold my hookbait makes the attachment easy. I rarely use just braid for this rig, I tie a doubled over Albright knot of some braid to a fluorocarbon boom to kick the rig away and make it nearly invisible

@matthewcollinsangler 2 года назад

Yes mate, I like it, good ideas 😊

@misterl9850 14 дней назад

so simple at effective!

@matthewcollinsangler 11 дней назад

thank you 😊

@callme_guy 2 года назад

Another great video

@matthewcollinsangler 2 года назад

Thanks very much mate 😊

@callme_guy 2 года назад

I love the no nonsense simple explanations of all your videos. It's nice to not have products thrown in your face over a simple rig explanation 😁

@djdave29 Год назад

Great videos as usual from you Matt. This is David (aka Mickey on here). Hope you’re now converted on the jet flame lighter lol. I know it works out more expensive, but more convenient. No more wrecked hook-links in windy conditions.

@matthewcollinsangler Год назад

Hi David, thanks for the feedback mate. Yes, great recommendation mate, I love it! I'm already on my second one lol

@craig2622 2 года назад

Brilliant" tidy rig there mat 👍🙂

@matthewcollinsangler 2 года назад

Thanks very much Craig, let me know if you give it a go 😊

@markrobbins7043 2 года назад

Excellent as always Mr Collins, thank you. Question - I love fishing close in the margins what size lead would be best suited, heavy or light?. The bottom is on a slight gradient and clear with minimal chod. Many thanks as always. Cheers

@matthewcollinsangler 2 года назад

Hi Mark, thanks very much for your support as always. I basically use as large as I can get away with i.e. something in the 3-4 oz range. The only time I’d drop down is if I was fishing a spot that required me to make a very discrete underarm cast and I wanted minimal plop. Then I’d drop to 1.25oz but TBH that scenario is rare. Cheers, Matt.

@vladvoinea6311 4 месяца назад

Thank you Matthew for all the in detail knowledge that you share. It helps me for sure in doing my first steps in fishing. Out of curiosity, do you think such rig would be suitable with a method feeder?

@matthewcollinsangler 4 месяца назад

Hi mate, sure, no reason why not 👍

@richardnunn8394 3 месяца назад

Excellent videos Matthew, keep them coming :). What are the properties you are looking for in the heavy duty braid for those of us not wanting to purchase another spool of braid, ie trying to use what I already have from alternative manufactures. Why 35lb, it seems excessive?

@matthewcollinsangler 3 месяца назад

Hi mate, you can use whatever braid you want and I’m sorry if I didn't make that clear enough in the video. You don’t have to buy a special braid for this rig, it's just that that braid has the properties I need for the type of fishing we do here. The lake has a hard rocky bottom and we have carp to 53lbs and catfish to 135lbs so we need something really robust. Hope that helps clear things up. Cheers, Matt.

@phil3038 Год назад

The benefit of being able to change the hook so easily has sold me this rig, plus simply using mono rather than rig rings or micro swivels saves £££ on components , does exactly the same job, and less clutter can only make it slightly harder for the carp to identify. I believe almost all well known rigs works so effectively it makes little difference which one is used and is more down to confidence and personal experience,

@matthewcollinsangler Год назад

Totally agree with you mate. This rig's very popular with guests for the reasons you mentioned.

@declanscriggins5020 4 месяца назад

Hi Matt… great channel and great tips! Fairly new to carp fishing, what would be the best way to connect the leader to the main line? Loop to loop or maybe a grinner knot? Keep the tips and content coming… tight lines 🎣🐠

@matthewcollinsangler 4 месяца назад

Hi mate, in my testing, the 2 best knots are the 5 turn uni knot (single grinner) and the palomar knot. You’ll find it difficult to tighten down the double grinner. Loop to loop with a figure of 8 knot works OK but I’d only use it with solid PVA bags as it’s not as strong as the 5 turn uni knot. I’ve made a video on leaders if you haven’t seen it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WiqE4u35MK8.html All the best on your journey 😊

@declanscriggins5020 4 месяца назад

@@matthewcollinsangler Many thanks Matt Will check out your videos on leaders 👌🏻

@lukew100 Год назад

Another great video … could you use bait floss instead of the mono line on the hook bait ?

@matthewcollinsangler Год назад

Thanks mate. Yes, absolutely, both will work, I also use bait screws.

@tahataha4607 8 месяцев назад

thank you very much deeply. I watch your channel from Iraq I wish you sometimes share us some information about fishing in Asia and what baits can we use, because I think the different weather may influence on the carp. best wishes

@matthewcollinsangler 8 месяцев назад

Hi again, I understand why you might believe that the carp in Asia behave differently but in my honest opinion, this is not the case. All carp originated from Asia. The biology is the same and so are the needs of the carp. Carp are omnivores and will basically eat anything. Baits such as sweetcorn, maize, chickpeas, tigernuts are all good options and relatively cheap. If you can buy (or make) some boilies, then even better as these are more selective. Don’t worry about fancy flavours. Anything sweet, salty, fishy, or nutty will work. I don’t worry about bait flavour. I just use what I have access to. They all work! Learn to focus on hook sharpness and use simple, strong and effective rigs, fished on a running lead and you’ll do just great. It’s all that matters really. Best of luck, Matt.

@johnnywalker3337 2 года назад

Wow...super ideea 🎣

@matthewcollinsangler 2 года назад

Thanks Johnny, hope you give it a go 😊

@michalgodziszko6594 2 года назад

Thank you Matthew! Great trick! Is this ultimately going to remove D-rig from the game? Thanks for your insight!

@matthewcollinsangler 2 года назад

Thanks Michal. Well, there are various circumstances when I wouldn't use this rig in favour of the classic D-rig. I’m currently fishing with the humble D-rig (new version) on the river and this multi rig would be a disaster in flowing water! Horses for courses in this game 😉

@paulappleton8986 Год назад

Hi Matthew, great video as usual. With regards to the blowback tube, can you use normal tubing or is it stiffer than that? Thanks and keep up the good work!

@matthewcollinsangler Год назад

Hi Paul, thanks very much for the support mate. No, normal rig tubing won’t work for this trick. You need a soft silicon based material that grips the braid. I designed the rig to work specifically with the Nash blowback tubes but it can also work with small hook bead or 3mm bore beads. You get 50 tubes in a packet and can use them multiple times so one packet will last you quite a while. Here’s a list of what I use in this video: Armourlink braid: amzn.to/3AsEjzQ Tungsten hook bead: amzn.to/3RbgmUq Blow out tube: amzn.to/3CCQtJ1 Tungsten hook beads: amzn.to/3RbgmUq Cling-on tungsten putty: amzn.to/3ApI0Xb Medium shrink tube: amzn.to/3e42Y6v (these are affiliate links to Amazon, same price to you but a small commission for me to help support the channel ☺️ All our video descriptions now show links to the tackle/gear I use) Cheers, Matt.

@dawnanghsengaung1083 Год назад

Thanks you Sar

@matthewcollinsangler Год назад

You're welcome 😊

@youpoptube1 Год назад

when would you use this rig vs the mono hair rig you show in another video? keep up the great work

@matthewcollinsangler Год назад

Hi mate, it’s on our to-do list to make a video on which rig to use where so we will get around to it at some point. The blowout multi rig is great for anyone that struggles to tie the knotless knot or anglers that are pressed for time and prefer a reusable rig where the hooks can be swapped quickly. It’s best used in a solid PVA bag or in a bait boat or rowing boat. It can be cast at short/medium range but beyond that it’s best to boat it or bag it. You need to use a high quality braid like the Armourlink as the rig is reused many times. Cheap braids will wear quickly and cost you a fish. The rig was specifically created for our guests because literally anyone can tie it. It’s very strong and has even banked 3 figure catfish. It can be fished over hard or soft ground. The mono hair is good for anglers that enjoy rig tying as each rig is pretty much a one shot deal i.e. catch a carp, throw it away (that’s why I use mono to keep the costs down). It’s cheap, simple and can even be tied without the use of specialist hooklink materials. It’s also very anti-tangle and so perfect for casting at maximum range. It’s impervious to the attention of nuisance species. It’s not suitable for use in a solid PVA and is better suited to being fished over a firm bottom. It can be fished over silt but you actually should use a much shorter hooklink. Although I have caught catfish on it, it's not really tough enough for the job unless you use really heavy mono which can cause problems with bait mounting. For me this means it suits my public water or river carping better than the blowout multi. Both rigs work, both catch carp. You just need to decide which is going to suit your angling better. Cheers, Matt.

@youpoptube1 Год назад

@@matthewcollinsangler brilliant thank u

@nicolaskomen Год назад

Hi Matthew, love the running inline lead setup, but.. is it safe when the line breaks? F.e. With the heli the carp is left with just the rig. Looking forward to your answer, best regards Nicolas

@matthewcollinsangler Год назад

Hi Nicolas, with an inline lead, when the line breaks, the line pulls through the lead very quickly. So in the worst case, the carp is towing a rig and some mainline. Then, if you use barbless hooks, the carp can very easily get rid of the rig. So for me, an inline lead setup combined with a barbless hook is one of the safest setups to use. Cheers, Matt

@kieranwilliams8892 7 месяцев назад

Hi, great video……would this suit a PCs mesh bag rather than a solid bag? Thx

@matthewcollinsangler 7 месяцев назад

Hi there, it depends how you attach your PVA stick. If you make up a PVA stick using a fine stick mix and thread the stick onto the hooklink, and you can do it without messing up the D, then this can work but it’s not something I do. The other option is to make a up a PVA mesh bag, thread some PVA tape through the bag and then tie it through the D section. What you don’t want to do is to hook the PVA mesh bag onto the hook and cast it out. What happens is that on impact with the water the mesh bag will completely close down the D as it pulls on the hook. It’s not the end of the world but it completely changes the size of the D and where the bait sits on the back of the hook rather than at the bottom of the bend which is where I want it. This rig was designed to be used in a bait boat or dropped from a rowing boat or in a solid PVA bag or to be cast out on its own without any PVA mesh bag. Hope that helps. Cheers, Matt.

@Hugh_Bastards675 4 месяца назад

Love it

@matthewcollinsangler 4 месяца назад

thanks 😊

@pauljones7233 2 года назад

Hi Mathew love your channel . What’s your thoughts on crimps and crimping rigs

@matthewcollinsangler 2 года назад

Hi Paul, glad you enjoy the channel! That's’ a great question… Crimps have never been part of my angling and TBH I doubt they ever will be. I’ve met a number of guests that have asked me whether it’s okay to use crimps at my lake and my standard response is “sure, as long as they pass my 8kg deadlift test”. This is part of the fishery rules due to the number of 3 figure cats we have. One failed with virtually zero force. Most break very easily, none have come close to passing my test which is why I don’t use them. If you are fishing for doubles and twenties then you aren’t using much force to land them anyway (usually sub 3lbs) and sure they work. My concern is that if an angler is using them because they’re struggling to tie a good knot, that doesn't necessarily make them good at crimping either and the concept of testing the strength of the finished result seems alien to many guys I meet. They simply assume that 20lb material is good for 20lbs regardless of the crimp. I know some anglers struggle with knots so if this keeps them fishing then I get it. Anyway, hope that gives you food for thought, sorry for the long response! Cheers, Matt

@pauljones7233 2 года назад

Thanks for the replyI ,I’ve bean Carp fishing for 35 plus years and struggled with crimps when I tried them thought I was something wrong . Keep up the videos we are never to old to learn

@matthewcollinsangler 2 года назад

@@pauljones7233 Absolutely, I’m still learning everyday and that will never stop.

@davelebeer6551 2 года назад

Hallo Matthew, thanks for sharing this rig! Does it only work with a hook with an outturned eye?

@matthewcollinsangler 2 года назад

Hi Dave, it’s not strictly necessary as you are using a supple braided material but out-turned eyed hooks (chod style) have a larger eye (size for size) than in-turned eyed hooks so you may find it hard to thread a loop of braid through. Only one way to find out! You can always just use my threading tool trick. Best of luck, Matt.

@davelebeer6551 2 года назад

@@matthewcollinsangler thanks Matthew!

@TM-721 Год назад

Hello Matthew, i just ran into your video's and I must say they are very interesting and usefull. One question, why a chod twister instead of a regular twister?

@matthewcollinsangler Год назад

Thank you for the feedback. You can use a regular twister but the eye is smaller and it can be a bit fiddly. If you're using one in a smaller size, it can be fiddly to thread a loop of hook link through the eye. This problem is common with any in turned eye hook. The chod pattern has a larger eye.

@mathewsmith3294 8 месяцев назад

Hi Matt, im fairly new to carp fishing and found this rig great! Could i use a ring with a screw on to attach bait instead of cutting and blobbing the mono?

@matthewcollinsangler 8 месяцев назад

Hi Matthew, yes, absolutely, that’s the bait mounting method I use in this rig: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Z2Zh54emhS4.html. Using the blow back multi with bait screws is a very popular option for our guests. All the best with it 😊

@keithh3876 Год назад

Hi Matt, how would that multi rig set up work as a combi rig on the end of some stiff link, and perhaps fished with a cut down lead clip fished running style?

@matthewcollinsangler Год назад

Hi Keith, yes it’s absolutely possible to make a proper combination multi rig with this setup for sure. You can also do it with a material such as Skinlink which is a kevlar cored coated braid. Just strip off 10cm for the loop and job done. Bear in mind that it is hard work to strip. I broke my Korda stripper on Skinlink lol. I wouldn't recommend using a lead clip setup up in a running fashion. Watch this video to learn why: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a6WI6Y1o_Xk.html. Instead I’d just use a very basic running ledger setup or something like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aBvZyHBCyAE.html Hope that helps. Cheers, Matt.

@keithh3876 Год назад

Thanks Matt, I’ll give it a go 👍

@ryangillion2160 Год назад

Hey Matt, just a quick question do you think there's much difference between using the blow back tube or fine silicone tubing?

@matthewcollinsangler Год назад

Hi Ryan, you’ll find that the blowback tubes have a thicker wall and are more robust than the silicon, I find they grip the braid better than the silicon sleeve. You’ll also find that they last longer and are better suited to the larger eye diameter of a chod style hook. Small 3mm hook beads or bore beads work okay but they don’t grip as well as the blowback tubes. There’s nothing wrong with starting off with a bit of silicon tube to see how you get on before running out to the shops to buy a pack of blowback tubes though. Cheers, Matt.

@necayip Год назад

Big jop thank you

@matthewcollinsangler Год назад

Thanks 🙂

@peter1873 Год назад

Mr Collins i have a question.. Is the palm test a sure method to check a hook set?....cause ive tied an exact replica of one of your other rigs but it wont turn on the palm test and hook...i am using a .40mm braid as the hook line..is it perhaps the braid that is too stif or is the palm test not a sure way to check?..im using a classic boilie hook from Docks.. Thanx in advance👌👌👌

@matthewcollinsangler Год назад

Hi Peter, the palm test is far from perfect. I had to use it in this video as it was the only way to demonstrate how the rig, tied the other way, turns away from the carp's mouth. The palm test should work okay with supple braided materials but it’s not great with stiffer material for sure. It's by no means the be all and end all of whether a rig will work in a real fishing situation. Palm testing of my mono hair rig is very hit and miss and yet the rig catches carp very well and I’m always getting anglers comment how well it works in a real fishing situation. Hope that clears things up for you. Cheers, Matt.

@peter1873 Год назад

@@matthewcollinsangler it makes sense thank u sir...im still new into all the specimen stuff,think i will build confidence thru time🤣🤣🤣🤣cheers

@shaiksarmath9078 Год назад

Does hook matters in pop up rigs? Then which type of hook is good? I'm using a curved shank hooks for my pop up rigs!

@matthewcollinsangler Год назад

Hi there, I don’t use curved shank hooks anymore (watch this video to learn more: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZxGllV2Zc5o.html) but even if I used them, I wouldn’t use them for a popup because they “sit” at the wrong angle. For a popup, you need a short shank, straight point hook with a decent size gape. I use the Nash chod twisters and they work great. In fact, I use them for popups, bottom baits and wafters. Here’s my popup setup video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K0A4GSH0z44.html. Cheers, Matt

@ianwaterhouse365 2 года назад

Hi mat do you ever use the Ronnie or spinner rig if so what hook pattern would you recommend.

@matthewcollinsangler 2 года назад

Hi Ian, well, tbh I’ve never been a fan of ronnie rigs and over here in France many commercial venues have banned them due to the randomness of the hook holds. I haven’t fished with one, I’ll probably have a go at some point! It’s difficult for me to comment but the rigs are banned at my lake. I don’t like a rig where the hook is connected by a metal loop directly to a swivel. I also don’t believe them to be necessary or better than traditional, simple rigs that have been around for a very long time. Sorry I can’t help! Cheers, Matt

@mgtjones3712 Год назад

Hi Matthew great video quick question what's the name of the table box you're leaning on looks very handy with measurements on it cheers martin 👍

@matthewcollinsangler Год назад

Hi mate, so that’s the large Nash Box Logic tackle box. I have the loaded version so it comes with a loads of smaller boxes which fit perfectly into the system. The Tackle box then fits into one half of the XL workbox to create an all in one tackle storage solution. It’s really good stuff with excellent build quality and it’s helped me organise my fishing so much better! Cheers, Matt.

@mgtjones3712 Год назад

@@matthewcollinsangler cheers will give it a look thanks for replying 😁

@user-su6dq4ho5c Год назад

Hi Matt love the channel mate!, I’ve taken so much advice on board from you since I started carp fishing. Just a quick question I’m using the same Nash lead inserts as you, but They’re a bit of a sloppy fit in the fox inline leads that I’m using, offering no resistance to hook a fish, do you have any tricks I could use to make it more of a tight fit to give me the one shake to release it method? Cheers mate Wayne

@matthewcollinsangler Год назад

Hi Wayne, I totally understand why it’s not working. The holes in the Fox leads are too big for those inserts. One option is… don’t worry about it! For the last couple of months I’ve been fishing without a shock effect, with a pure running rig, and been catching well. If you want to create a little shock effect with the Fox leads, try replacing the Nash insert with whatever tail rubbers you have to hand, you might find one that works better.

@user-su6dq4ho5c Год назад

Nice one Matt, Thanks for the reply, I was tinkering last night and cut a small piece of tail rubber and slid that down over the swivel before sliding the insert over that, and it beefed it up a bit to give me what I wanted, Thanks again for taking the time to respond 👍🏻

@131076smh Год назад

Hey Matthew. Do you think this rig can be tied with a soft coated hooklink? Great video as always 👍🏼

@matthewcollinsangler Год назад

Hi mate, yes, absolutely, I use the Nash skinlink when I need a coated hooklink, you might find that you don't need to add the blow back tube because the material is stiff enough to hold in place, all depends on the stiffness of the material. Cheers, Matt

@daventry9685 Год назад

Hi matt. Thanks for all you tips. I've learnt loads. Recently I've been fishing a drainage sewer , where I've seen monster carp . It's extremely narrow , 12ft or so , and weedy. Maybe 5ft deep . There's a few clear spots in the weed . The bait is practically under the rod tip . Been using a naked helicopter rig with maize . I've had a take , but the fish spat me out . Could you give me any pointers please on presentation? What would you do in this situation? Cheers mate .

@matthewcollinsangler Год назад

Hi mate, thanks for commenting and great to know that you’ve picked up some tips. I guess if it's weedy then the water is clear? I’m not sure that I’d use a heli setup in these circumstances. I’d probably use a dedicated weed lead clip to drop the lead immediately on the take. I hate doing this but sometimes it’s the only way. Is there any flow? If so I would try and fish up-tide style as the line lay will be better. Line lay is going to be the biggest problem. I’d probably get in the waders, clear a spot and clear a path that I could lay the line through neatly. It’s time and effort but if they are worth it then why not? You also need to get some bait going in regularly to build their confidence. I would use 10m of 30lbs (0.50) Nash heavy duty snag leader and I’d fish that straight down to the clip. It’s nice and clear and low viz and very robust. I use it all the time on the rivers. If it’s really gnarly then I use the 40lbs (0.60) version. On the rig front I’d use something simple and robust like my river rig. No how-to on this (yet) but here’s the short to give you a quick spec: ru-vid.comCh032Nsihcc?feature=share. Best of luck, sounds like an exciting spot! Cheers, Matt.

@daventry9685 Год назад

@@matthewcollinsangler Thanks Matt I'll try that out. What I've been doing is tying the lead on a 6lb rotten bottom . I use 15lb mainline, a 15lb mono hooklink . It basically an old school running paternoster . Nothing is fixed for fish safety . Cheers mate. Thanks for your advice

@matthewcollinsangler Год назад

@@daventry9685 Ah right I get you. I'm a fan of the rotten bottom as well. It should have worked if fished in a running configuration but I suspect these carp are pretty wily! Keep the bait going in and best of luck with it! Cheers, Matt.

@dricketts4101 Год назад

Can you make this rig with normal hooks as well as chod style hooks? Just wondered if it would be more aggressive with normal style hooks? Great informative video like always 👍 your videos help so many people. Thank you

@matthewcollinsangler Год назад

Hi mate, the rig as shown has been used for the last 2 years at Beausoleil and it’s been very effective. I haven’t tested it with other styles of hooks. I have total confidence in the Nash chod twister so can’t really comment mate 😊

@dricketts4101 Год назад

@@matthewcollinsangler thanks a lot for the the reply and more so for taking the time to help everyone. I have been carp fishing for over 20 years but still learn so much from your videos. Utube or a carp fishing company or magazine should give you a reward. Top videos, top man thanks again

@dricketts4101 Год назад

Or a medal 🏅

@stevethistlewood5194 Год назад

I am fairly new to carp fishing. Currently, I have been using method feeders both fixed and free running inline one's. I wish to up my game and want to try some of your rigs. However, they all seem to use braid, which is banned on most of the lakes I fish, both as a mainline and hook line, also the maximum size hook to use is 10. Can you create your rigs with mono or fluro without any problems. Most of the lakes have fish no bigger than about 30lb. Any advice you can give would be gratefully received and appreciated. Thank you.

@matthewcollinsangler Год назад

Hi Steve when you say fixed method feeder I assume that you mean a semi fixed method feeder otherwise it would pose a tether risk to the carp. It’s great that you’d like to try some of my rigs. Although you’ve commented here on one of my braided rigs, I'm a big fan of mono and there are a number of mono rigs on this channel. I’ll also be doing some more mono rigs in the future so do subscribe and hit that bell 😊 If hook size is limited to 10’s then you need to use a really good quality, sharp and strong carp hook like the Nash Chod Twister (I know plenty of size 10s that would open out on a good 30!). This winter I had carp to 53 on a size 8’s so they’ll be perfect for the job. The hook is the most important bit so spend all your money on hooks and change them very very regularly. We have guys here get through 4 packets a week! My advice would be to forget about fluoro and use mono instead. Nash have just released a 15lb version of the Zig-Flo. Again I tested it this winter for bottom bait fishing in the 12lbs and banked some very big carp on it. It’s robust, and knots very well so the 15lbs version will handle anything you encounter very easily. The Zig -Flo is far cheaper than any fluoro and comes on 100m spools. My mono rigs are designed to be disposable so after one carp I bin them. If you’re worried about buoyancy just add a touch of putty or a small sinker. Here are some links for you from my channel: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K0A4GSH0z44.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LzFina92brM.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hoHB1gi_sQs.html. Enjoy the journey! Matt

@stevethistlewood5194 Год назад

@@matthewcollinsangler Thank you for your advice. Will try your suggestions, Hopefully, I will get a better hit rate.

@moafishing5654 7 месяцев назад

Rig looks good. However, I am interested in one crucial aspect. What if (when casting your line) the boilie will go over the blow out tube, getting stucked close to the eye of the hook and having a horrible presentation on the bottom, not to mention the mechanic will change also.

@matthewcollinsangler 7 месяцев назад

Hi mate, I understand your concern but as long as you set it in the correct position to start with and the blowback tube is directly behind the eye, it will not move on the cast because the impact load of the water is placed on the boilie and it locks it in place so it can’t move. What you must not do is attach a PVA mesh bag to the hook. This will cause the blowback tube to slide on impact with the water and ruin the presentation. If you’re still worried, test it yourself and you’ll see exactly what I mean 👍

@peternufc1981 Месяц назад

Im trying this next time I’m out

@matthewcollinsangler Месяц назад

Cool 👍

@peternufc1981 Месяц назад

@@matthewcollinsanglerI’ll keep you informed 👍

@ivanfojan8859 Год назад

Hi Matt. Another great rig video but I'm a bit confused about one thing. Surely it doesn't matter if you can't pass your boilie through the second loop. Just put the hook through and mount the boilie afterwards?? Just a thought mate :)

@matthewcollinsangler Год назад

Hi Ivan, you're absolutely right. If you choose to leave the bait off before you make the loop to loop connection then loop size can be anything you want it to be. I choose to make the loop exactly the same size because that way if I make up some loops in advance, it doesn't matter which way round I use them. It’s just another way of eliminating the chance of getting things wrong. I also prefer to mount my bait before loop to looping them to a swivel. At the end of the day it’s personal preference. Sorry if that wasn't clear on the video. Cheers, Matt.

@ivanfojan8859 Год назад

@@matthewcollinsangler Very understandable and logical. I'm new to making rigs so I'm thinking in advance for when I make an inevitable cock up :)

@markandrew1067 25 дней назад

Double overhand knots ...are these strong enough? Why not a fig8 or perfection loop? Beginner ( last fished 40 yrs ago)so confused. Sorry. Any help appreciated

@matthewcollinsangler 24 дня назад

Hi mate, I'll put my answer here as well. It’s very much a case of “horses for courses” with knots! Every material is different and responds differently when knotted. Diameter is also a factor. That’s why I’m so specific about what knot I use for each job on each rig on the channel. On this rig, the blowback multi, I use two single overhand loops (not double). I do this because this thick braided material grips itself very strongly and you simply don’t need anything more complicated than an overhand loop knot. If you try to do that knot in a lightweight mono it will slip and fail because the mono does not grip itself. That’s where the non-slip mono loop knot comes in. I’ve never mastered the perfection loop, so I don’t use it! When I test the figure of eight loop against the non slip mono loop knot, the non-slip mono loop knots wins (for me). Knots are tricky!

@markandrew1067 24 дня назад

@@matthewcollinsangler thnx so much ...really appreciated 👍

@RADDY1993 Год назад

Would this be ok for UK Catfish.

@matthewcollinsangler Год назад

Yes mate, absolutely, the 35lb Armourlink is our go-to hooklink at Beausoleil for both carp and cats to 135lbs.

@racheldoherty3479 11 месяцев назад

Would you still use this 13cm rig folded into a solid bag? Seems quite long for a solid bag rig. Thanks

@matthewcollinsangler 11 месяцев назад

Hi there, that's what I use for the size of fish I'm fishing for. If that feels long to you, you can fish it shorter 😊

@racheldoherty3479 11 месяцев назад

@@matthewcollinsangler thanks for replying. I've recently got back into carp fishing and your videos have helped me no end. Thanks so much!

@matthewcollinsangler 11 месяцев назад

Great to hear! Glad to be helping you on your journey 😊

@richardneale6828 Год назад

Hi Matt, I’ve noticed you use 35lb for hooklink but you use 20lb mainline. Is carp fishing different as you would normally use a weaker hooklink than your mainline in course fishing?

@matthewcollinsangler Год назад

It's a great question and it's one I ask myself too. I used 35lb in this video because it's the hook link we recommend to guests at the venue as we have cats up to 100lbs. Armourlink is available in 15lb, 20lb and 25lb and any of those would work too. If you use a thinner braid, use the smallest size of blow back tube or it won't grip the material. Cheers, Matt

@richardneale6828 Год назад

@@matthewcollinsangler Thanks for the info, so if I use 20lb mainline would 20lb hooklink be ok?. It’s carp I’m fishing for ,no cats in our club lake. Sorry to appear dense but I’m new to all this 🤣

@matthewcollinsangler Год назад

@@richardneale6828 No worries mate. Carp fishing is very confusing! In coarse fishing you would always have the hooklink the same strength or weaker than the mainline but in carp fishing we don’t worry so much about whether the hooklink is stronger than the mainline as long as the lead can either eject safely off a lead clip or, as is my preference, use a simple running ledger (inline or swivel).

@icecube2T8 2 года назад

Can I ask, I’ve used a over hand knot for years when making my rigs but started to see a lot of people using the figure of 8 knot? Due think there’s any benefit or not.

@matthewcollinsangler 2 года назад

Hi mate, thanks for commenting. That’s a great question. Different knots suit different materials. I can get away with a basic overhand knot in this material because it’s super strong and is capable of landing cats to well over 100lbs. Yes I could use a figure of 8 but it’s slower to tie and more difficult to achieve regular loop sizes. Would it be a stronger knot? Maybe. Do I need a stronger knot? No. If the simple overhand knot is working for you in the material you are using then personally I don’t see the need to change unless you experience a failure at this point. My motto is test and test again so just get a weight and give the knot a lift. 10lb should be the minimum knot strength for carp fishing IMO. Hope that helps, Matt.

@icecube2T8 2 года назад

@@matthewcollinsangler thanks for the reply, and to be honest never failed on me yet myself but when you keep on seeing people do something different it makes ya doubt it, I’ve started on a new members lake and it’s full of cats hence properly have more a chance of catching them then the carp 😂

@matthewcollinsangler 2 года назад

@@icecube2T8 No worries mate. If you’ve recently joined a water with cats in it you might want to check out our catfish rig video. It’s really simple and easy to tie. Here’s the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NkOZfsGNmbk.html

@michaelhedges41070 Год назад

Hi which mono rig do you think is best the hair or the d rig thanks

@matthewcollinsangler Год назад

Hi Michael, I actually find the d rigs are more universal and can be adapted quickly to different waters, so the d rig and a bait screw is my go to rig nowadays. I'd still use the mono hair if I want to fish a few grains of corn.

@michaelhedges41070 Год назад

@@matthewcollinsangler thanks for the very fast reply what line do you recommend thanks

@matthewcollinsangler Год назад

@@michaelhedges41070 For mainline, I use Nash Bullet, good all rounder, makes good hooklink too. If you're looking for a mono hooklink with a different diameter then I use zig flo for the light strains or heavy duty snag leader for something thicker and stronger. Those 3 materials cover everything I need.

@michaelhedges41070 Год назад

@@matthewcollinsangler have you ever tried a slip d with the zig flo ive just tied one up and I think it should work fine

@matthewcollinsangler Год назад

@@michaelhedges41070 Not tried it mate, and not sure it’s going to work properly 🤔 Because mono has a stiffness to it, the D will sit too tight to the shank and the ring won’t slide up and down the D freely as it’s meant to do, so it’s not a material I’ve used for a slip D.

@shaun1961hodge Год назад

Can you tell me what rig box you have? Thanks

@matthewcollinsangler Год назад

Hi Shaun, most of the gear I have is Nash. The Rig Box is the Nash Dwarf tackle pouch XL which fits the Box Logic medium tackle box which is available separately. Quality stuff that is well designed and will last many years.

@shaun1961hodge Год назад

@@matthewcollinsangler thank you kindly

@timtrapnell7464 Год назад

Would this work with a semi stiff braid?

@matthewcollinsangler Год назад

Hi Tim, yes mate absolutely. In fact our guest at Beausoleil this week is using 35lbs Nash Skinlink (semi-stiff) with a striped back section for the loop. He’s using it in conjunction with my shock & run lead system which works well with semi stiff materials such as Skinlink.

@wingnut381 Месяц назад

If not using a PVA bag would this rig work tied out of mono rather than braid??

@matthewcollinsangler Месяц назад

No it wouldn't. With mono, I use this rig primarily: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Rr4paU5B_r4.html

@Nick-01536 14 дней назад

Is this just a still water rig or can it be used in a river as well ???

@matthewcollinsangler 11 дней назад

Hi mate, I wouldn't use this rig in flowing water unless the flow was really slow. Supple braid is more prone to tangling in flowing water and there are usually other species present (crayfish, bream, chub etc.) than can mess with a rig like this. If you want to use a multi rig in flowing water I would change the hooklink material to a coated braid like Nash Skinlink in 25lbs. I’d tie this the same way but there’s no need for the blowout tube. I wouldn't strip any of the coating back at all, just leave it whole. I do use this style of multi rig from time to time but I actually prefer this rig for flowing water: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Rr4paU5B_r4.htmlsi=2WZwousI687WqGef

@horgaszonlineshop Год назад

You will have a video on hook sharpening? Regards Kornel

@matthewcollinsangler Год назад

Hello Kornel, yes, I have a video on hook sharpening, it’s a bit old but the technique doesn’t change: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ahwZ5wHBt-4.html. Good hook sharpening takes a lot of time and practice and if done wrong, could make your hooks worse. If you struggle with the technique, it’s better to change the hook for a new one than fish with a badly sharpened hook. All the best, Matt.

@tjeufo Год назад

Thanks Matthew can you fish it with snowman

@matthewcollinsangler Год назад

Hi Kina, yes absolutely. Bottom baits, wafters, pop ups, snowmen. They all work with this setup 😊 Cheers, Matt.

@tjeufo Год назад

@@matthewcollinsangler thanks i will try it 👍🏻

@herrjanssen8531 2 года назад

Hi Matt, great video (as always) and your recent video editing changes are also very nice! I'd be interested to see how the rig would change if I used hook beads instead of the blow-back tube originally intended. You mention it briefly and show a picture, but the background as to why and how it would change was unfortunately not explained. Since the hook beads are much shorter, I suspect the loop would behave differently, depending on the softness of the individual braid material. Could you perhaps explain this? Thank you very much in advance! Cheers!

@matthewcollinsangler 2 года назад

Hi! Thanks as always for your comment. Ren (my wife) is very happy that you have noticed the new tricks. She’s been having a lot of fun with our new editing software! The reason why I didn't go into any detail on that subject is that I don’t believe there is much to say. The reason why I use blow back tubes for this rig is that, due to their length, they grip the braid strongly and can withstand the rigours of being slid back and forth multiple times. If you use hook beads, they may not grip the braid as strongly (they tend to be shorter). Therefore will become looser, quicker than the blowout tubes so you’ll need to change them sooner. For me, the fractional change in shape of the D between various different types of beads or tubes doesn't make any difference. Cheers, Matt.

@markclifford7725 Год назад

Is a single over hand loop strong enough?

@matthewcollinsangler Год назад

Hi Mark, in this video I’m using Nash Armourlink in 35lbs. With a simple overhand knot as shown in the video I've done plenty of deadlift tests using an 8kg kettle bell and it passes every time. Considering those knots rarely see more than 2kg of load during the fight I’d say the overhand knot is fit for purpose. We’ve also had cats of 100lbs banked on this rig as shown. Cheers, Matt.

@markclifford7725 Год назад

@@matthewcollinsangler OK mate, sounds like you've done your homework on it, if I was to use 25lb armourlink do you think it'd still be strong enough? I really like the idea of this rig for my solid bag fishing. I just don't want the knots to fail me. Cheers Matthew

@matthewcollinsangler Год назад

@@markclifford7725 Hi Mark, the 25lb version with overhand knots will be strong enough for carp of any size by a factor of 400%. Just tie them right and gently tighten them down. Test them yourself using a bucket of water (weighed) if you have doubts. This rig is the result of 12 years experience of guiding holiday anglers at a tricky French estate lake. It’s also been rigorously tested over hundreds of nights by me and our guests so yes I’ve got a lot of confidence in this rig!