STS 4311A - Solidworks Flow Simulation - Basics 

Hah, good eye... but you missed the Curta!

You're welcome!

My pleasure! Glad you liked it. Stay tuned for more CFD videos.

Most welcome

Glad it was helpful!

Agreed. I also like to use the "clone study' option to prevent re-entering all the parameters.

@@MarkSummersCAD i would like to know how i can make a study inside another study for example an internal study like in an engine that operates inside a bigger system while that system operates for example under external conditions 😇

@@AbdelmounaimSiffour You can do the first study (inner portion) and get the results, then import those results (flow rates, etc.) into the second (outer portion) study. I do that for my study where I compute flow rates through the duct system, then apply the flow rates to the larger (outer) study.

you can surface plot convection coefficient. Imagine you could put a surface parameter on convection coefficient as well.

Hah, yes, but it recovered nicely!

They are Vernier surface temperature probes. They connect via bluetooth or USB. www.vernier.com/product/go-direct-surface-temperature-sensor/

@@MarkSummersCAD one more question sir, is it possible to simulate a PCB in enclosure with a fan in solidworks to make a thermal analysis for my project?

Absolutely@@kamelk8027. You can use Solidworks PCB to design the PCB and use it in in Solidworks Flow with the Electronics Cooling Module Add-in.

Thank you Sir for sharing your knowledge with us@@MarkSummersCAD