No video :(

Stubby Stock Tail Tidy KTM Duke 390 125 250 200

Подписаться 25 тыс.

Просмотров 35 тыс.

50% 1

If you find that the stock rear tail/ fender/ mudguard is too long and you want a tail tidy then it's an easy modification to turn the stock tail into a tail tidy. You can stubby the stock KTM Duke 390 250 200 125 and make your own tail tidy.
Apologies to the headphone listeners for the audio on this one.
I'm showing a really short modification but it would look good a little longer. I've used a welder but it would be easy to bolt together instead.
Instagram: / moto_mirius
Subscribe to keep up to date with the regular content: bit.ly/2UWwY90
___
Some links may earn me a small payment - but cost you nothing
Links to Where I Purchase Parts:
eBay: ebay.to/2Io2l6L
Amazon: amzn.to/2KvMiFA
___
2017 KTM Duke 390 Parts List:
- Power/ Sound
Akrapovic Slip On Exhaust KTM/RC 125 390: bit.ly/MotoMiriusKTMAkrapovic
Akrapovič Exhaust Grommet: bit.ly/AkrapovičExhaustGrommet
Exhaust baffles: www.pipewerx.co.uk/webshop/ac...
Decat Pipe Leovince Duke 390 2017 - 2019: bit.ly/MotoMiriusLeovinceCatDe...
Stunt/ Protection
Rok Bagoros Two Finger Stunt Clutch Lever: bit.ly/MotoMiriusStuntClutchLever
Magura X-Line Handlebar: bit.ly/MotoMiriusRokBagorosHan...
Rok Bagoros Adjustable Crash Cage: bit.ly/MotoMiriusRBAdjustableC...
Rear Sprocket 56 Teeth: bit.ly/MotoMirius56tStuntSprocket
Rear Sprocket 50 Teeth: bit.ly/MotoMirius50tStuntSprocket
O-Ring Chain 520 SRO6 120 Links: bit.ly/MotoMiriusORing520Chain
Galfer Wave Front Disk DF940CW
Rok Bagoros Front Freestyle Crash Pegs: bit.ly/MotoMiriusRBFreestyleFr...
KTM Powerparts Engine Cage
Service
R&G Paddock Stand Slider: ebay.to/2UgX1Dp
KTM oil Change Kit: bit.ly/MotoMiriusKTM390OilChan...
K&N Oil Filter: bit.ly/MotoMiriusKNOilFilterKT...
Style
KTM Powerparts Bar Ends: ebay.to/2Xcfv9U
KTM Powerparts USB Power Outlet Kit: bit.ly/KTMUSBPowerKit
___
Playlist 390 KTM Duke: bit.ly/2VGE3I0
____
Follow me here:
Instagram: / moto_mirius
Facebook: / motomirius
Website: www.moto.mirius.co.uk
___
Music provided by Epidemic Sound: www.epidemicsound.com/referra...
___
Logo: bit.ly/2Zau67P
#RokONSquad #MotoMirius #KTM390
moto mirius,RokONSquad,rok bagoros parts,ktm 390,ktm motorcycle,ktm,
ktm duke 390,390 KTM Duke,ktm duke,duke 390,390 duke,duke 390 mods, 390 duke mods, duke 390 modified
2017 ktm duke 390,ktm duke 390 2017,2017 duke 390,390 duke 2017,duke 390 2017,2017 ktm duke,2017 duke 390 modified,2017 duke 390 mods,
2018 ktm duke 390,ktm duke 390 2018,2018 duke 390,390 duke 2018,duke 390 2018,2018 ktm duke,2018 duke 390 modified,2018 duke 390 mods,
2019 ktm duke 390,ktm duke 390 2019,2019 duke 390,390 duke 2019,duke 390 2019,2019 ktm duke,2019 duke 390 modified,2019 duke 390 mods,
2020 ktm duke 390,ktm duke 390 2020,2020 duke 390,390 duke 2020,duke 390 2020,2020 ktm duke,2020 duke 390 modified,2020 duke 390 mods,
ktm rc 390,ktm rc,ktm,rc 390,390 rc,rc 390 mods, 390 KTM rc
2017 ktm rc 390,2017 ktm rc,2017 ktm,2017 rc 390,2017 390 rc,2017 rc 390 mods,2017 390 KTM rc,ktm rc 390 2017,ktm rc 2017,rc 390 2017,390 rc 2017,rc 390 mods 2017, 390 KTM rc 2017
ktm duke 125,125 KTM Duke,duke 125,125 duke,duke 125 mods, 125 duke mods, duke 125 modified
ktm duke 250,250 KTM Duke,duke 250,250 duke,duke 250 mods, 250 duke mods, duke 250 modified
ktm duke 200,200 KTM Duke,duke 200,200 duke,duke 200 mods, 200 duke mods, duke 200 modified

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 103

@alishawasthi8837 3 года назад

Wow David, I just wanna say it’s an amazing channel and literally I’ve been binge watching your channel from past 3 hours. Just loved it . Keep it up, sending much love and positivity.❤️❤️❤️❤️⚡️

@MotoMirius 3 года назад

Thank you, glad it is good for you and really, much appreciated! Skäl David

@alishawasthi8837 3 года назад

@@MotoMirius ❤️❤️❤️❤️🙌🙌🙌🙌🙌

@rays9033 Год назад

Alish, I agree. His KTM 390 knowledge and presentation style is very captivating. Most of my weekend was spent watching his channel, and I do not own a Duke 390…not yet that is. 😊

@robertpeachey8348 8 месяцев назад

I love your attention to detail it works wonders for my OCD ,TOP JOB MATE !!

@MotoMirius 8 месяцев назад

Thanks, much appreciated!

@l3roym Год назад

Thank you so much for this Detailed video, it was very helpful. I opted to cut mine straight off at the square tube to achieve the desired length and welding it back together again.

@MotoMirius Год назад

Nice. Size and shape of the licence plate will drive the final design. In the UK we have huge plates and it makes it hard to tuck them in (legally anyway!)

@Shinysideup 3 года назад

Nice tidy job, looks good

@MotoMirius 3 года назад

Thanks Ian, much appreciated. Skäl David

@tinks43 3 года назад

Looks factory 👍🏻 Happy new year! 🥳

@MotoMirius 3 года назад

Happy new year! Cheers Dave, hope you all had a fantastic time! Skäl David

@jDuck- Год назад

happy new year

@simon.yourfavorite Год назад

Great video!

@MotoMirius Год назад

Glad you enjoyed it

@michaelthomas8097 2 года назад

Thanks for the video man I just got finished with mine an it turned out great only cost $15 for paint

@MotoMirius 2 года назад

Thanks and nice work!

@springy-2112 3 года назад

Came out nice David . 👍🏻☮❤

@MotoMirius 3 года назад

Thanks Springy. Hope you are having a great New Year.

@turboteen33 3 года назад

good one⚡

@MotoMirius 3 года назад

Thanks, much appreciated! Skäl David

@mick9802 Год назад

Thank you, I really enjoyed this video, as many previous ones. I plan to the same next long winter. I like your language and pronunciation. I would even recommend your videos for English classes ;).

@MotoMirius Год назад

Thank you, much appreciated and good luck with your modifications!

@chandanagamage3339 3 года назад

Good one👍 ..

@MotoMirius 3 года назад

Thank you so much 😀

@rajkhanndare4358 2 года назад

Very Nice ♥️

@MotoMirius 2 года назад

Thank you! Cheers!

@rays9033 Год назад

I thought in one of his later videos I noticed at least one welding helmet on a shelf there, and hoped to see some fab/welding work, either making parts or a repair. Looks like he used a MIG this time. I wouldn’t be surprised if he has a video making some frame mods with a TIG too! If that was me running that cutoff wheel, and not using gloves, half of my video would need to be deleted to remove the excessive blood spray…😂 The closeup of the final product on the bench has a nice MIG bead run, nice! The metal was thicker than I thought, I was expecting to see some damage where you may have blown-through.

@MotoMirius Год назад

Thanks, much appreciated. It had been my plan to include some welding in the video, but I do so little welding at the moment that it takes too long to get back up to speed to include it. The main issue with welding this is that being a non structural part it is a very low quality steel and I think recycled so there is a lot of contamination which makes for very messy welds. I try not to get too much blood on the camera ;)

@Flow23 Год назад

I need those 125 rear stickers on my 2021 😀

@handcannon9814 3 года назад

Hi sir, i saw this nice transparent oil filter cover, is it okay to use it in long term? What do you think?

@MotoMirius 3 года назад

If it's properly made and it doesn't leak it should be fine - it's just a cover.

@samu3398_ 7 месяцев назад

Hi! I know that im late because this video is from 2 years ago but i bought a 2023 ktm duke and discovered your channel recently. It looks like that the bike from this video have a bigger back tire than the stock one, am i wrong? About the tail tidy, 100% that this is the next change for my bike! Amazing video, really helpfull!

@MotoMirius 7 месяцев назад

Glad I could help and thank you. That is a stock size rear tyre. The way the manufacturer constructs the tyre can make them look a bit wider - and I agree, the Bridgestone does look wider (I think that is what I had on the back in this video).

@griffowolfhackmine Месяц назад

great vid, but i guess you already cut the plastic underside of the tail when you fitted the original aliexpress one?

@MotoMirius Месяц назад

The tail tidy was already fitted when I bought the bike, but yes, you would need to modify

@matthiasdaenen325 Год назад

Would you suggest the basic tail tidy from rok bagoros? I'm doubting because the cables of the blinkers are exposed. And the price gap for the premium one is pretty big.

@MotoMirius Год назад

It's not my favourite to be honest. I really like the premium one and I'd choose that if I were looking to buy one - but not cheap!

@matthiasdaenen325 Год назад

@@MotoMirius Yeah so I ordered the premium one! You know, watching your channel is really fun and expensive at the same time! bassically ordered every protection part + tail tidy for my 390 from bagoros now 😁😂

@MotoMirius Год назад

@@matthiasdaenen325 Ha! :D Yes, it can become expensive, but I've never had a hobby where this didn't happen.

@getaddictedtoanime 2 года назад

too good

@MotoMirius 2 года назад

Thanks

@getaddictedtoanime 2 года назад

@@MotoMirius no problem ❤️‍🔥

@cpr336 3 года назад

I love it..is it possible I can buy one off you...if not, do all the duke 125, 200, 250 and 390 have the same mounting for the rear fender ?

@MotoMirius 3 года назад

Thanks. I'm not yet at the point of selling stuff but yes all the gen 2 bikes use the same parts for the rear fender.

@cpr336 3 года назад

@@MotoMirius well when and if you get to that point i would love to buy !!!!!...went to a machine shop they don't wanna do anything

@ezekielgskeen8607 Год назад

Dave! Just asking about on the road security, for bikes, because I just bought another 125 KTM 2022, and nearly got it stolen out side a small walk in Sainsbury's just today, I had a D-Lock on the back sprocket and chain, so that walk the only thing that stopped them and so staff shouting in the store that they were trying to steal my bike, could you suggest any measure that I could take? P.s They got away on a scooter....

@MotoMirius Год назад

Of course they were on a scooter. Ultimately if someone wants your bike there is nothing you can do to stop it. But what you experienced is common too - you have to strike a balance - there is only so much security you can carry and a D lock is good (if its a good one) but hard to lock a motorbike to anything with one. A proper chain and padlock - say ABBA not Oxford works but then you have something that weighs nearly as much as the bike. I do quite like the KTM disk lock for this reason. Never bought one, but it's always fitted and not so easy to remove with an angle grinder or brute force as your average cheap disk lock. Good to hear that you survived that one. But a couple of years ago there was a 390 Duke got stolen from the high street near me and was ridden around for quite a while by the thieves.

@ezekielgskeen8607 Год назад

@@MotoMirius thanks a million for your insight, I ordered two more D-locks, the one that saved me was a ABUS, That I normally use with my garage lock, one more of them a Kryptonite deck Evo, for the break disk, until my steering lock is fixed Saturday morning, thanks again, salute to always!

@MotoMirius Год назад

@@ezekielgskeen8607 I see a typo in my response - Almax not Abba. Good luck!

@michaelthomas8097 2 года назад

How long did it take to build that

@MotoMirius 2 года назад

Not all that long - it's hard to say because filming always makes jobs five times longer. Waiting for paint to dry is the longest part, a good fabricator would be able to do the basic work in just a few minutes.

@BhargavaJaisimha 3 года назад

I bought a tail tidy and am using that but I don't really like it... Also it does not have the number plate light (so kind of not legal).... but I think I'm going to be doing this now!!! looks pretty cool, hope I complete it tho :b

@MotoMirius 3 года назад

Go for it, you have nothing to lose. Good luck. David

@athulsanthosh85 2 года назад

where did you get the cover

@MotoMirius 2 года назад

Its a KTM Powerparts cover. You can get copies which are cheaper - they are OK but more cheaply made.

@michaelthomas8097 2 года назад

Yea I'm thanking about doing it instead of buying one I'm a really good welder

@MotoMirius 2 года назад

You should have no issues. Steel quality is a bit low.

@adamstyles823 3 года назад

Watched twice and im now very jealous

@MotoMirius 3 года назад

Wanting to be able to make modify stuff like this is why I eventually bought a welder.

@rahulm4349 Год назад

I want bye this Tailtaidy. Can you made it?

@MotoMirius 11 месяцев назад

Not at the moment I'm afraid. Thanks

@samcrossland2702 3 года назад

Hi do you know when the handle bars you have are coming back in stock ?

@MotoMirius 3 года назад

Hi Sam, no idea I'm afraid, that is all down to Magura.

@samcrossland2702 3 года назад

As I’m looking to buy some as my stock are bent

@MotoMirius 3 года назад

@@samcrossland2702 Mine were too. You can buy pro-taper etc - these are dirt bike sized bars. Because KTM.

@samcrossland2702 3 года назад

Do Magura do standard bars for a ktm with all the wholes drilled ?

@MotoMirius 3 года назад

@@samcrossland2702 I think all the X Line will fit but I doubt if they are drilled.

@manishsatose6434 3 года назад

Great

@MotoMirius 3 года назад

Thanks

@cavitecheckpoint 3 года назад

Your garage and tools is a dream of most men, are those only for personal buse or for work related too.....

@MotoMirius 3 года назад

Thanks. I built the shed and the tools accumulate over the years. I still use the spanners that I bought thirty years ago. You can travel a long way in small steps. This is personal, but I'm also planning for the future when I'm no longer doing a desk job.

@APtS_Gh0stHunt3R 3 года назад

my right ear was so lonely :P

@MotoMirius 3 года назад

Ah, I continue to have microphone issues and being deaf in my right ear, I sometimes miss it. I just spent an hour on the next video correcting exactly this problem!

@adamstyles823 3 года назад

I did see this on another video the other day and wondered if and when you was going to post this. Unfortunately, this is way out my skill set! Plus how would I get the aliexpress tail tidy off probably rusted on haha

@MotoMirius 3 года назад

Ha! Easier to make than you might think. I did shoot footage of how to do this without welding but I left it out as it wasn't complete enough. Maybe I need to buy another tail and do a non welding version? Did I come over a bit peeved about the existing tail tidy? AliExpress is back on the bike after a bit of rust removal, filing and a coat of paint! Skäl David

@adamstyles823 3 года назад

@@MotoMirius yes cable tie? haha

@adamstyles823 3 года назад

@@MotoMirius Or I send you my spare one lol

@MotoMirius 3 года назад

@@adamstyles823 LOL!

@adamstyles823 3 года назад

@@MotoMirius All starts with Halfords Advanced tool kit! Yes, I think will start my full licence if going to be tinkering already gone way above bikes worth just following your videos lol

@KimlongChan95 3 года назад

At least show how it looks in 180degree. Anyway good work.

@MotoMirius 3 года назад

I had planned to show better shots of the tail but during the making of this my computer crashed and I lost files, and I've taken it off to mock up on another bike so I didn't take additional shots. But thank you, much appreciated, and I will try to do better! Skäl David

@akhilraj5861 2 года назад

💪✨️♥️

@MotoMirius 2 года назад

Thanks

@manishsatose6434 3 года назад

Support form India but made video on ktm rc also

@MotoMirius 3 года назад

Thanks. One day I will buy an RC too - but this is mostly the same on the RC. Skäl David

@moodmusicytc 3 года назад

My dumbass though long bike tails where a legal requirement, that's what I was told when younger at least aha

@MotoMirius 3 года назад

Depends where you are in the world and also depends on how your local authorities implement and enforce those legal requirements. Impossible to generalise across the whole world! Skäl David

@davidharrison7779 2 года назад

Strength not shrength

@MotoMirius 2 года назад

I'm glad you got that out of your system!

@DavidTaylor-rc8ur 3 года назад

All that to save £42 mmm , I don’t think so !!!

@MotoMirius 3 года назад

Get what you pay for and in my case after two years £42 was an ugly mess of rusty metal.

@DavidTaylor-rc8ur 3 года назад

@@MotoMirius that will always happen through lack of proper maintenance

@MotoMirius 3 года назад

@@DavidTaylor-rc8ur Low quality recycled steel with skipping product finishing ahead of poor powder coating have nothing to do with proper maintenance. As they say, buy cheap, buy twice. But go ahead and buy cheap parts if that works for you.

@asif2009ful 3 года назад

(Y)

@MotoMirius 3 года назад

Thanks. Skäl David

@Tekla046 Год назад

Too long video 😏

@MotoMirius Год назад

Videos are paced so that people who are not familiar with this sort of work can follow along. A RU-vid hint you may not be familiar with - if a video is running slower than you like then go to settings and increase the videoplay back speed until it is at the pace you want.