Stunning Loft Room Alcove Wardrobe | Fitting Day | Tips, Tricks & Techniques | EP#34

Подписаться 48 тыс.

Просмотров 18 тыс.

50% 1

In this video we are Fitting a STUNNING Loft Room Alcove Wardrobe.
Complete with flat trims and side panel to match this lovely contemporary, newly renovated loft room conversion.
The wardrobe has 4 x 3 panel, slow closing shaker style doors, complete with beautiful hand picked Rose gold square knobs.(The customers choice, and I Absolutely love them !)
The Interior is very simple, with a 3 drawer set and flat fascias, and 3 hanging rails, all set at the customers height requirements.
I absolutely Loved this job from start to finish, especially as I was involved with everything ( Measuring up, Designing, Building, Spray painting, and Fitting )
This wardrobe looks fantastic in this beautiful Loft Bedroom... The Solid Pine Flooring, beautiful anthracite aluminium windows and freshly painted walls all make this wardrobe stand out.... And also Vice Versa !
I hope you enjoy this video and possibly take something away from it.
Thanks Ryan
============SUPPORT============
If you like my content & would like to support the channel monetarily you could buy me a coffee:
www.buymeacoff...
Or directly via paypal:
PayPal.me/TLcraftsman
==========SOCIAL MEDIA==========
SUBSCRIBE HERE: / @thelondoncraftsmanwor...
FACEBOOK: / thelondoncraftsman
INSTAGRAM: / the_london_craftsman
RU-vid: / @thelondoncraftsmanwor...
WEBSITE: www.thelondoncraftsman.co.uk
=========LINKS TO MY GEAR========
==========MY FILMING GEAR========
amzn.to/2sqhHAS - GOPRO 8 BLACK
amzn.to/2RQh26p - SAMSUNG 128 GB MICRO SD CARD
amzn.to/2LYOqUN - APPLE MACBOOK PRO
amzn.to/2LZ9xpR - GO PRO 8 HEAD STRAP
amzn.to/2EgSs6G - FILMING TRIPOD
amzn.to/2PnDXUP - GOPRO TRIPOD AND HOLDER
amzn.to/2rNGIG5 - ULANZI SMALL LED CAMERA LIGHT
=====GEAR IN THIS & OTHER VIDEOS====
SPRAY ROOM TOOLS AND MATERIALS
amzn.to/2O7HDJp - GRACO 695 ULTRAMAX 2 AIRLESS SPRAYER
amzn.to/2LX0Ufw - GRACO 390 PC AIRLESS SPRAYER
amzn.to/34tVFuo - GRACO RAC X GUARD
amzn.to/2PRrrvO - GRACO 110 FINE FINISH LOW PRESSURE TIP
amzn.to/38CPQ0J - GRACO 210 FINE FINISH LOW PRESSURE TIP
amzn.to/2PIMQHC - GRACO 310 FINE FINISH LOW PRESSURE TIP
amzn.to/2spuWSd - GRACO 410 FINE FINISH LOW PRESSURE TIP
amzn.to/36FsKoi - GRACO 510 FINE FINISH LOW PRESSURE TIP
amzn.to/35oNj8v - SPRAY BOOTH TURNTABLE
amzn.to/36819M1 - TACK RAGS
amzn.to/30ADvq9 - SIP SPACE HEATER
amzn.to/2TyIlTz - SPRAY FILTERS ON A ROLL
amzn.to/2uTXapl - TWIN SLOT SHELVING UPRIGHTS
amzn.to/38l76H2 - TWIN SLOT SHELVING BRACKETS 10 PACK (370MM)
amzn.to/2tjUK37 - PIPE INSULATION (TO PROTECT SHELVING BRACKETS)
amzn.to/2TCfBJK - 400MM ADJ SPEED EXTRACTOR FANS
WORK SHOP TOOLS & MATERIALS
amzn.to/2LVq51Y - MAKITA ROUTER / TRIMMER / PALM - RT0700CX4 ( MUST HAVE!!! )
amzn.to/3cO8C7D - 1/4" FLUTE CUTTER
amzn.to/3cTCYW6 - 1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER ( MUST HAVE!!! )
amzn.to/39Kyezi - HITACHI 2ND FIX BRAD NAILER
amzn.to/2UIB97u - HITACHI 1ST FIX GAS NAILER
amzn.to/2R9z7em - JIGSAW
amzn.to/2V2SGWT - POWER DRILL
amzn.to/2UWDudW - MAKITA BELT SANDER
amzn.to/3dUmyxl - BOSCH CHOP/MITRE SAW
amzn.to/2YOuiK0 - MAKITA BRAD NAILER
amzn.to/2Eo6SSg - PVA GLUE
amzn.to/34pvYem - MITRE FAST
amzn.to/2POJR09 - 35MM HINGE CUTTER
amzn.to/2udA4JU - SIP 10" TABLE SAW
amzn.to/3aq2pgI - 250mm TREND 48T BLADE
amzn.to/2sDwkkL - 3M RE-USABLE DUST MASK
amzn.to/2NEWzyk - KETER FOLDING WORKBENCH (THIS IS A MUST BUY)
amzn.to/30AlVD2 - JOINTING COMPOUND FILLER
amzn.to/2TIkUqK - MAKITA ORBITAL SANDER
amzn.to/2FZe1JI - ORBITAL SANDER SANDING DISCS ASSORTED
amzn.to/2sJ6YBU - 500MM GTV SIDE MOUNTED DRAWER RUNNERS
amzn.to/37fet2y - MECHANICAL PENCILS
amzn.to/36cfo2y - 3MM WOOD AND METAL DRILL BITS
amzn.to/37gjiIL - MASKING TAPE (SKOTCH 25MM)
amzn.to/2RF1wZ4 - STANLEY TAPE MEASURE 8M
amzn.to/30DdW8a - WOOD BRADAWL ( SHARP POINT FOR MARKING HOLES )
amzn.to/37qwNpi - MAKITA COMBI & IMPACT DRILL SET 18V
amzn.to/36h7W66 - STANLEY SCREW DRIVER SET ( STANLEY FATMAX )
amzn.to/2ugisxk - COMBINATION SQUARE 400MM ( BAHCO )
amzn.to/30HwDrg - VINYL / RUBBER GLOVES
amzn.to/30Loxho - P600 SANDPAPER WET AND DRY

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@allanbeasley4565 3 года назад

Brilliant job again guys! Love this channel.

@thelondoncraftsmanworkshop 3 года назад

That's amazing! Im really glad 👍👍👍

@barryspiers6956 5 месяцев назад

Very professional job guys, nice one! Just about to build one in our guest bedroom and your Channel has been invaluable 👏

@thelondoncraftsmanworkshop 5 месяцев назад

Thank you!! 😊 If you have any feedback on new videos or videos you think I'm missing, feel free to say! Always good to get feedback back . Cheers ryan

@doneo50 3 года назад

awesome tutorial, amazing wardrobes look great, have noted the trampoline city outside..good job lads.

@MrDamodee 3 года назад

Ooh, I'll sit down tonight and give this a watch! Another great looking job!

@docdoctme 2 года назад

Love your channel…the closet came out beautifully! Thanks for sharing your talent.

@jackleaf220 Год назад

Great video, thanks Ryan. Have you ever had any issues with rails with a span that wide? I'm making my parents a wardrobe and there'll be a couple of rails with a 1 metre span. I know my Mum will cram it full of clothes! Cheers

@thelondoncraftsmanworkshop 11 месяцев назад

Hello jack, no not yet, we use 25mm dai rails so they are pretty strong. Cheers

@michaelplays2449 3 года назад

Great video,thanks

@bullet113001 3 года назад

A great looking job, excellent attention to detail. I am revamping my workshop to accommodate spraying, you cant do it to this level without being set up properly. Thanks for sharing your spray booth details.

@stephentoby8750 3 года назад

Nice trick with the screws on the draws fronts i over think things like that! I’ve tried double sided tape, miter mate even slipped a through the front where the handle holes are sometimes . I do like that grey finish inside and out .

@thelondoncraftsmanworkshop 3 года назад

Thanks Stephen, ive tried lots of other ways too on drawer fascias, and this seems to be the best so far 👍👍

@hi-tech55 3 года назад

Yeah I like that way as well. I was shown that at Sharp’s Bedrooms.

@harpo187bling 2 года назад

Very good.

@ChristopherClaudioSkierka 2 года назад

hi there , how did you attach the side facia board along that gap, you said you used packers too , do you have a video showing this since it missed this bit out on the current video

@barryroberts95 3 года назад

Thanks for your quick reply to my other question. Loving your channel best woodworking channel on you tube. I've watched all your videos, wondered if you could do one on drawer construction I think its the only thing you haven't covered. Do you miter corners and use the tape trick and do you groove the bottom of drawers for the base. Keep up the good work thank again much appreciated.

@thelondoncraftsmanworkshop 3 года назад

Thank you very much!! I will do, I rebate the bottom of my drawers and glue, pin and screw the bots in. I'll definitely look into this vid 👍👍

@deancarter4109 2 года назад

Just stumbled across your page. Wow your craftsmanship is amazing. For the cheeks for the drawers what size is that hole at the bottom for the door hinge?

@thelondoncraftsmanworkshop 2 года назад

Thank you 😁 I think we go for a 120 high x 70 wide cut 👍

@ChristopherClaudioSkierka 2 года назад

Hi there nice video!!. Can you tell me how did you fix the left side panel in the gap and the wedges on top of the wardrobe to afix the scribe - how did you attach that to the ceiling /top of wardrobe. thanks in advance

@jochippyy Год назад

Hi Ryan loved your video extremely useful tips. Do u make your carcases in ply or mdf? I keep worrying that screwing my hinge receivers into mdf isn't man enough or is it OK???

@adams7475 3 года назад

Great video and lovely wardrobe. Out of interest do you ever remove the skirting in the alcove and fit right up to the wall?

@thelondoncraftsmanworkshop 3 года назад

Hi, not unless the space is so tight wanted to gain that 20-25mm. I leave them on as the rear walls are generally out of level and that 20 mm or so is a good void for leveling the wardrobe 👍

@barryroberts95 3 года назад

So you use biscuits and screws for the joinery, do you ever use glue on the carcass or drawers? Or do you think its strong enough without

@thelondoncraftsmanworkshop 3 года назад

I definitely use glue on the drawers, there is no need with carcasses though and never had a problem not using glue 😁😁

@kevinbenstock8116 2 года назад

Hi Ryan, love your work those wardrobes look amazing, i would love to have a go in my house, i know every bespoke wardrobe you do is different but is there a rule of thumb how much wide your doors should be so that you get the 3mm gap at the sides where the cheeks are, and the 3mm gap in the middle and 3mm gap next to the adjoining carcase so the doors dont bind or knock, could you give me the width dimensions of your doors and the width of each carcass so i can see how you worked it out so the doors dont knock or bind. Also great tip about leaving enough room at ceiling height so when you tip them up you dont hit the ceiling, i wont ask you how you know that.!!!! Plus i like what you done with the cheeks at the side of the drawers so the drawers miss the doors when they pull out, good tip. Sorry for all the questions but i dont want to make the door width too wide so that they are knocking or too small that the gaps are more than 3mm. P.S i cant afford a sprayer like you have, but i was thinking of getting the erbauer airless sprayer from screwfix, around £200 do you think i could get a decent finish or would it be better to roll it with a good quality mini roller. Thanks in advance for your reply, keep the videos coming mate i love the detail and tips you provide, All the best Kevin.

@thelondoncraftsmanworkshop 2 года назад

Hi i wouldn't buy the screw fix one. Look on ebay until a used graco comes up at a bargain price. I don't think the screwfix one will spray unthinned paint. Re door gaps, watch my videos on sketchup and also how to design a wardrobe etc. They will have the door gaps in them 👍

@gkenyon9144 3 года назад

Good system you have, looks great but please keep the camera movements down a bit you make me dizzy

@thelondoncraftsmanworkshop 3 года назад

Thank you. OK ill keep that in mind 👍👍

@Glentp75 3 года назад

Great job! I wondered what you thoughts are with spraying units like a wardrobe assembled and in situ? I know not really an option when doing work in clients house but as a DIY job at home. I just do not have the space you have in your workshop for spraying before assembly. Is there a chance paint will run or will absorption from MDF help stop that?

@thelondoncraftsmanworkshop 3 года назад

It is possible if you don't have really small cubbies, id say 600 x 600 openings would be smallest to spray. To get over this make the wardrobe with adjustable shelves rather than fixed. If your sprayer is set as low as possible maybe 1200 -1400 psi, you spray fast ( airless sprayers pump out paint so fast so stopping or slowing down will cause puddles or runs ) and build up your layers rather than trying to paint it in 2 coats. If I were to paint a unit in situ, I'd do 3-4 mist coats. Have a heater on to warm up the room, and mdf, and keep it on to dry the paint asap to stop the grain raising. 3-4 mist coats is definitely the way for this though.

@Glentp75 3 года назад

@@thelondoncraftsmanworkshop Cheers!

@madebymeaaroncoughlan2326 3 года назад

When doing the drawer fronts I wonder would double sided tape be any good🤔🤔

@thelondoncraftsmanworkshop 3 года назад

Yes I cant see why not, I think I've done this before

@almusti 2 года назад

Great video! Would you recommend glue in biscuit joints? Not sure if you do use glue or not, sorry if I’ve missed it. Thanks and keep up the amazing work!

@thelondoncraftsmanworkshop 2 года назад

Thank you! It depends what your making I guess. For something that needs strength or hasn't got any support then glue ( for example if that piece is going to be made into a carcass so will be supported once screwed together then no need for glue) . That's my opinion anyway 👍👍👍😊

@almusti 2 года назад

@@thelondoncraftsmanworkshop well, I wouldn’t argue with you because you’ve got the experience and are basing your opinion on that. Thanks pal and enjoy the rest of your weekend ✌🏻

@gedmartin6987 2 года назад

How wide are the drawers on this build roughly? The span I am looking at is 1050 wide. Not sure whether to split into 2 drawers. Great videos. Keep up the good work! Cheers

@thelondoncraftsmanworkshop 2 года назад

Hi I can't remember but if you have the choice to split in half, do it. Drawers always perform better when they are roughly the same length as the runners you use 👍

@michaelread2067 3 года назад

I'm nicking all your tips. And I'm minded to buy all the kit. But soddit. How much does this cost? For cash?

@thelondoncraftsmanworkshop 3 года назад

Hi Michael, I have a price calculator page on my website for prices 👍👍

@zax1972 3 года назад

Great job! Which type of concealed hinges do you use for these shaker style doors?

@thelondoncraftsmanworkshop 3 года назад

Thank you, these hinges were all full overlay where they all sit over the carcass fully.

@zax1972 3 года назад

@@thelondoncraftsmanworkshop thanks man! You’ve inspired me to have a crack at this. What thickness mdf do you use for the carcass?

@thelondoncraftsmanworkshop 3 года назад

Thats good news! I8mm for all carcasses, divisions, side panels and trims, 6mm for backings and drawer bottoms ( always use backings, never make a wardrobe without ). For all shelves spanning under 600mm use 18mm and anything over use 25mm. I use 12mm for doors and drawer fascias if they are being shakered, but 18mm if they are just flat doors.👍👍👍

@zax1972 3 года назад

@@thelondoncraftsmanworkshop thanks man for taking the time out to answer me, I really appreciate it.

@thelondoncraftsmanworkshop 3 года назад

Thats no problem, if you need any more help feel free to ask👍👍👍

@Dickymint1000 2 года назад

Ryan, what colour did you paint the wardrobes. Cheers mate, Richard

@thelondoncraftsmanworkshop 2 года назад

Hi Richard, does it say in the comments? I thought someone already asked? If not I'll dig through my paper work and will find out for you 😁😁👍

@Dickymint1000 2 года назад

@@thelondoncraftsmanworkshop Sorry mate will check it out!

@Dickymint1000 2 года назад

@@thelondoncraftsmanworkshop Found it mate. Cheers Ryan

@jackwoods6058 3 года назад

What paint is this and colour code please?

@thelondoncraftsmanworkshop 3 года назад

Hi this is Little Green paint brand and the colour is Scree. We matched it in johnstones eggshell.

@kieranfinnerty631 3 года назад

Why would you put packers behind your end panel so it was splayed to cover the gap up why did you not just move your wardrobes over away from the window wall and put a bigger scribe in the right hand side. Surely the end panel on a splay will be noticeable on the floor junction 🤔

@thelondoncraftsmanworkshop 3 года назад

We had already mover the wardrobe as far to the left as possible as we didn't remove the left skirting. It was only a 3mm packer , not noticeable in the slightest 👍