Subaru BRZ - Stock vs Nameless Exhaust Header Back 

Inside it sounds nice but outside you can barely hear it

And that's why they recalling it now :D

Where did you order from

What’s that exhaust name?

@@escu67 it has no name bro 😎

hitting redline over and over usually isnt a great idea. 5-6k rpm in the BRZ stock with no tune (this video) is completely fine as thats basically the sweetspot from my few years of experience so far. this video is to compare the exhaust notes between the headers back stock vs Nameless. A speed comparison or top speed video would likely involve some tracking apps and some gopros on the speedo (hopefully next spring)

Nick Larson actually there's a video showing that unless your engine is cold it won't do any bad and actually does good by breaking up carbon desposits.

When I Had My FRS With A Custom Loud Exhaust, I Drove It Hard Every Single Time! Smile on my face every time!

dat ass

+MrTallbutshort here ya go ;) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xth1whaq3H8.html

ScreamingElectron where

If you don't mind me asking, are you running any other exhaust modifications other than the back? I am getting a nameless and am debating whether to get mufflers or no mufflers. From your experience, would no mufflers be unbearably loud with no other exhaust modifications? Thanks. Beautiful car!

if you arent going to turbo the car get the 2.5" exhaust system. you need mufflers unless you are working on a track only car.

Thank you!

hey if I want to buy this can you link me please and give me all the specs so it could sound just like this because u actually have straight pipe and it's really loud I like it tho lol .. I have a video I'f u look at it in my videos but I really like yours thanks

+joshieowashie all the details you are looking for are in the description ;)

Scott Osborn nice! Yeah I think I might try to do some more videos of the car in action other than on the track 👌🏻

Thanks man! If I missed anything let me know and I'll post more

+Nick Larson would it be louder with the muffler delete?

+Nick Larson would it be louder with the muffler delete?

TAYOTAS yeah i would love to get an aftermarket header. but they are so expensive. Once i get a turbo or supercharger the header will likely be replaced :D

Nick Larson well i got good headers for my Camaro SS for about 300$ but installment was around 150$ , i paid abit , but better performance on streets ! , tune tune tune is my life !

Nick Larson if you supercharged the header can stay. I highly recommend borla. Also if you wanna turbo with uel headers look up AVO bolt on frs

TAYOTAS I own a 2015 sti and they're pretty fun and have decent speed but the BRZ/FRS have really really nice handling.

Cinnamononomon i love the sti's , i used to drive the 06-07 turbos around 600hp , man i just love how it sounds , i assume it surely beats my current camaro lol

This is what I want my frs to sound like 😂 cheers mate

😂😂😂🤣

All those deets are in the description

+CZW Backup per Nameless site this setup is $1,884.00 before tax/shipping

Luna Sikk No check engine lights

Per the instructions you have to jack up the engine on the passenger side if installing the Header Back 3" exhaust system

BlueToxicShuffler here ya go. couldnt resist lmgtfy.com/?q=Nameless+Exhaust+Header+Back+

yeah the stock one is gone - Nameless one is on there (200 Cell High Flow Cat)

so sick man!!🔥 ill take it off too so it sounds agresive af too🙏🏽

+Balbir Rodriguez Type "nameless performance header back exhaust" into google. It should be the first result. - Jason@Nameless

It doesnt. i was just babying her the first couple years :D

Valis that does nothing to the gearbox forks nothing ... you act like he’s putting 100 pounds on it . You’re resting Ike 0.10pounds on it and it’s just lightly on it not leaning on it lmao

Sky Nguyen From Nameless Performance: "The weight of our axleback is 17 pounds compared to the 25 pound stock muffler.The axleback produces almost no peak HP but fills in the valley that is typical of this new direct injected boxer 4.but when you combine the midpipe and overpipe youll be looking at an additional 12whp gain"Dyno here: namelessperformance.com/Pictures/brz/BRZ%20Baseline%20vs%20High%20Flow%20Cat%20and%20Street%20Axleback.jpg

+Jose Gomez youll have to contact Nameless. they are hand crafted and usually made in batches - depending on what you ordered.

+David Lee This is a 3" Overpipe/Downpipe, 3" Midpipe and 3" Axleback w/ 5" mufflers.

+Jason Griffith which one would be louder the 2.5 or 3"

ya

+Rumpel Stiltskin Im trying to keep my BRZ relatively stock looking. any modifications must be in good taste. So for me, the different colored tips were a no go. it really just depends on your build and end goals... all personal preference. Good luck!

+Ronnie Luntsford Absolutely love it. Go with the smaller piping and largest mufflers if you dont plan to turbo.

Ben Schneider it all depends on your plans for the car. Personally, i see my BRZ becoming a small tuner project with engine work and a turbo or super charger down the road. If you go turbo, you really want to have the 3" exhaust setup to allow for better flow. Without the header and the turbo or other engine mods, this full exhaust kit only adds 14whp, not much to shake a stick at honestly, but its now prepped for the future :) I will say this though, if you never intend on going turbo, get the 2.5" pipes so its not as loud ha So for me, its worth it for these reasons: -sounds great -Looks fantastic -Sets my BRZ apart from the rest -Milks all the HP out of the car still NA -Car is ready for whatever i throw at it without having the exhaust restrict

+Nick Larson love the sound but a lil too loud for my taste and cops in socal are annoyingly anal about loud exhausts......I looked on the nameless performance site and I cant find the 2.5" header back exhaust :(

its on the nameless performance website. you select what size inlet you want on the product.

Ohhhhh! okay thanks! really nice set up by the way, love the exhaust, tail light, rallyarmour look

checkout the description :)

+Peter Thompson ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-67mlTXQyXtc.html

+Mik Janko so for that piece you'll need to disconnect the mounting bolt and jack the engine up about 2". For more instructions / guides Nameless can help. They have a chat option on their site 👌🏻

Yeah same bro love that upgraded sound now it has a new exhaust so I think it’s now 210hp instead of 200

The bushings are from Nameless. I replaced 4 of the 5 OEM bushings. Not sure I understand you gasket question unfortunately

H

This was the header back kit

okay sounds good.

+Mik Janko nah. Just have a buddy spot the alignment when lowering. Optionally you can run over to an exhaust shop to help out if you need to lift it up

I recommend doing some google searching on those subjects to gain some knowledge. RU-vid folks just troll here

juan salazar def get a tune if you are doing everything including the headers all the way back. If you are spending the money on quality parts why wouldn't you spend the extra for a tune to reap the benefits :) Since I still don't have a header on mine, I'm running stick tune. I think a tune would still benefit but I'm waiting for headers/turbo. This spring is suspension wheels and tires (videos to come). Hope this helps!

Nick Larson oh nice thats gonna be intresting im not there just yet lol i ordered my nameless kit already. im just waiting on a tune. and was wondering if its safe to run without it just yet

+Vex The links could change. go to NamelessPerformance for the parts.

+Nick Larson I dont know much about cars. However, do i order two of the 3'' 200 Cell High Flow Cat or one is fine for the brz? Don't really know what it is used for. Also Helmholtz Resonator do i order one or two? It's not an intake right? Sorry i really dont know much i just want my brz to sound like this. Linking to pages to buy the parts you intalled on your brz would help me so much.

you should chat with nameless on their website for that information :)

+Anthony Schembri no

But still sound giid

Too* ;)

Lolol that is the blinker stalk at 5:17

its on the site still yes. 3" Header-Back Exhaust

Nick Larson thanks bro appreciate it

3"

Shes all stock tune NA

xboxchildgameplays shop.namelessperformance.com/subaru-brz-scion-fr-s-dual-exit-axleback-exhaust/ shop.namelessperformance.com/2013-subaru-brz-scion-fr-s-2-5-downpipe-factory-fit/

Everything from the headers back is Nameless. Don't forget the mid pipe shop.namelessperformance.com/2013-subaru-brz-scion-fr-s-3-midpipe/

Daki_ Kawasaki headlights are stock here.

Official Vladimir it’s been about a month now. Did you get a link?