Subaru eBay Lip for the Honda Prelude! 

Iron Man gahhh deng, you def puttin in WORK!! Keep up the grind bro!

@@Rawrkee alot of work but I truelly luv it,give me a rushhhhhhh

denggg, that's a creative idea, I'll have to try it out one day!

Hansen McDonnell ayeeee, thanks man! :D

Elias G chyeahhh! Thanks bro!

George Gomez it’s now a subralude! 😂

@@Rawrkee Hahaha 😂

Spoon sports front lip!? I've never heard of that, you def gotta post a vid and send me some pics :D

naim abdool man, I’m a really dude hahah

Techniq_BB6 yoooo!! I’ve def been thinking about that!!! Any recommended brands???

@@Rawrkee I'm running Stanceparts for the past 4 years. Replaced the air valves that came in the kit for some uprated ones that allow me to set the height (or pressure rather in the cups) to have smooth aired up driveability, so I can now use them as if it was a bagged setup but with the benefit of having the rebound rate of a coil spring

they're 17x9.5 +30. camber, I don't remember, probably about -2 degrees. In my opinion, this fitment only works if you lower your car and camber the wheels. As of now, my wheels arent cambered and the lude is raised up a little because of my new coilovers wont allow me to go any lower, so the fitment look ehhh compared to how it looked in this video

Check the video subscription, I found a few links for you

Professor Xavier's RU-vid account for the gifted it was a DIY project, I used g35 projectors in DEPO headlights

Headlights were custom made using G35 projectors. Seats came from Canada, a nice find on eBay

@@Rawrkee Awesome! Thank you for replying.

L J OEM front lip from Honda. Snagged one whole they were still in stock

Rawrkee oh dang nice 👍 gotta get one for mine the front looks naked without one

m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pVm6Zjbk8vA.html

@@LJ10650 check out aeroworks, they sell high quality replicas of the greddy, oem and wings west lips. im gonna get a wings west lip kit from them

I'm not sure yet but I think you need to do some maintenance on your coilovers if you have a set installed

Techniq_BB6 damn, I never thought of that 😂

@@Rawrkee lol, hope it helps. But I see you got out the driveway nicely with that sideways action

@NoMore Time I disagree, the further he is able to get the front into the roadway the more clearance he'll have at the point the wheels go off the wood. The way it currently is the planks are still at a slight dip and the car comes off too early. In the side ways action he does towards the end it's fine, but if he wanted to go out straight then lengthwise would be better. I have the same issue at my GF's place

Keep an eye out on ebay! Mine came from Canada

yeahh :/

@@Rawrkee damn man smh. Hopefully you'll get her patched up. She's hella clean

Ahhh man, I've never messed with the clutch and slave cylinder, try hitting up the Facebook 5th gen groups

Are you referring to around the 9:06 mark? That’s my passenger side interior door lock that rattles loudly

@@Rawrkee it was around 5:50 mark in the twin coil over video. Not this video, I was going threw your vids seeing if you talked about it again but I haven’t seen anything. The vid says 4 months old.

Tein not twin

@@Rawrkee did you see the message in the other video? The video is only 7 min long and it was right after you put your coilovers on you drove it down the road and you said right away that it was rattling in the back and you hoped that you could figure it out. The title of the vid is Tein coilovers on the lude

@@notacoyote2790 if you have adjustable dampening, it should help. I think I made mine more softer and it runs a bit quieter now

It’s OEM but you can use an OEM style lip

Yuhhh and it’s 06-07 check the description

SLicKriCk B But the driver side looks fine 😂😂😂😂

They’re varrstoen es2

You can get the lip off eBay

Plenty of base model LCAs out there in junk yards on marketplace eBay etc, hard to find type sh ones. Just depends on make model etc. eBay is my go to

@@midniter2001 thanks been ebay buy 20 years now so I am alwayz on there,mine is the base and the rear is hard to come by they have use once on ebay now and want 170 use and beat up but honda dealers and other cant get it all disconnected,so I am trying I hard i wish I had a direct connection to japen speed store

You da man 💪🏼💪🏼💪🏼

why??? do you have a fish tank back there? hahha

@@Rawrkee yeah it's bad