Sunbuck Bluetooth Amp ENGLISH Review 3 Months On Av-MP326BT TAV-339BT Chepest Amps On eBay Amazon 

What is the power consumption, not power output, also for others info. Not only does it have the graphic eq., It also has pre set graphic settings on the remote control, remember this when adjusting the manual graphic

Great review, thanks for the upload. I purchased one for the bluetooth facility, and the tuner section. I wanted an amp with an equalizer, cos the cost here in England for a separate EQ is beyond belief. Cant buy a decent equalizer for under £100 here. Im using the Sunbuck as a pre amp to run a Denon dvd/cd player, and then into a Sony F210 as the power amp. The sound is awesome, and i can tweek the bass/treble at 3 different sections. 1, the Sunbucks built in equalizer. 2, The Sunbucks built in tone controls. 3, The Sony's built in tone controls. The music i listen to most is bass driven, and believe me there is more than enough in this set up. The added advantage of the Sony amp is the headphone jack, its a pity Sunbuck didn't put one in, and that is the only downside i can find. Anyway, for the price it punches above its weight for sure. Cost me just over £50 delivered, and it arrived within 3 days from Amazon. Thats around the same price as a well used and abused pre owned amp locally. Its a no brainer.

Bro, love the video. One of the best intros I have seen for ages! Very informative :)

I saw this amplifier for 40 dollars, brand new. How can you make an amplifer for a such price? Eve with an EQ. Please! Something must be wrong?

Haha great vid especially the start ❤❤❤❤❤❤❤😊

Just a question can you use passive speakers with the bottom unit the av-mp326bt Cheers

G'day sheila, i got one, was a bit suspicious what with the price being stupidly low, however, turned it on with nothing connected, wacked it up to full volume, full bass and treble, graphic up to top, with two nasty little 60watt phillips speakers, and nothing, not a hum or a hiss, i thought,' that's a good sign'. By the way, i found the same unit with at least seven different names, each one had subtle differences such as labelling, and quality of finish, even a stepped volume knob whereas mine is a smooth rotation. Some are different on the back too. I blue toothed my phone which is so crap its embarassing, and the sound was bloody awesome, i noticed you running the volume way up at three quarters, and i was running at a third, just moving it a couple of mm's up greatly increased the volume, seems to be optimum performance is best at about a third, with increased volume coming from the input volume of whatevers plugged in. I live in a nuclear fallout shelter and it shook the founds, most impressed.interestingly the microphone section is independent of the amp and graphic. i haven't tried inputs at back or usb or chip or tried 4 mics running at the same time but will at some point. Thus far, i am fkn impressed! Try, 'dub fx at goa', and play with the graphic you'll enjoy it.

It was hard to tell from your audio, but it sounds like you have a ground loop between the computer and the amp. Turn the volume up with no audio. Unplug the cable. If the high frequency whine goes away, you have a ground loop. In that case, add a ground loop isolator between the amp and the computer. (A ground loop isolator is merely a transformer that provides galvanic isolation.)

Any manual for MP326BT?

When first time power on this unit, is there any a quick loud sound emitted from speaker? When turn it off, is there similar a quick loud sound emitted from the speaker?

audio output on back of 326bt........to power amp or for recording?

I'm assuming these cheap amps kind of all do the same thing. I didn't need anything powerful so I went to eBay and bought a Sunbuck AV-660BT. For that price, I'm not expecting greatness but after seeing your video, I'm looking forward to receiving it. Thanks for the review and some great advice.

Tech put some 4 ohm tweeters in my speakers without asking first so now I need to find a very inexpensive receiver that can handle 4 ohm speakers. My present receivers say to use 8 ohm only.

Bought a pair that I run in series to power a set of Peavey PV215 speaker towers, they do the job fairly well...👍

Have a couple of the sunbuck 326bt but never understood why the line aux doesn't work how have you wired it to work on the line aux?

Is it durable? How long have you used it?

Love your review. Great personality. Thanks

Im looking at the bottom big amp bro but how many watts? You have same set up as i do. I run laptop to 2x subs wired together (one is powered) then sub to amp and speakers. The bottom amp you have also has a fan for cooling i think which is what i need as it will get hot!.

I'm looking at building a touchscreen jukebox any recommendations on a reasonable priced amp please?

Hi with the sunbuck amplifier is there a line output at the back for connecting a powered subwoofer to?

I've just been looking at this as it says it has a 12v input which is what I need. Have you tried running it on 12v?

Just got one and I have 2 x times 200 watt speakers on it and good speaker wire and can only turn it up to about 45% before my speakers distort, my whole room shakes with the base under that reckoning I would say it's doing about 500 watt

2000w ? roflmao 2x20-30wrms 4-8ohms. its 8/10 value for money but 2000w is criminal marketing

Would you recommend this to two bafles 15" 150 Watts 8 ohms..???

Would you recommend this to run two bass transducers at 75w 2 ohms rated?

Thanks for the review mate. I think I may pass on this one if you say its only about 55watt RMS...

G'day mate... Here in Indonesia we have similar amplifier under the name of FLECO AV-MP326BT, with the same design, same dimension and all...😂 kinda suspicious...😁

Does echo is affected on mic?

Do you mean 50 watts total or 50 watts by channel ?

Did you say 55 watts? Can you confirm that?

How clean at high volume?

Should do for my younger brother not giving him the proper equipment 😂

Can I use it to dj parties?

Mine just died yesterday. Volume nob as been cracking and going quite then loud for a wile yesterday it was crackling then the volume just fizzled out and that’s it can’t get any sound from it now I payed about 40 pound for it so probably ain’t worth paying to get it fixed , Chinese rubbish

How can Bluetooth link?

Ha ha! I bought this little junk amp for under $50. I got a kick out of all the features of the little thing. I can hook it up to my boat, or golf cart for music. I've had my Moog Synthesizer running through it. Hey,for $50 bucks, who gives a shit if it lasts for a year ! Right?

All those mic inputs but there's no headphone jack :S

I saw this on ebay and I thought that was a scam lol

RMS REAL

Harga nya kokk GK d tampil kan

I bought it just for laughs and it's junk after just a few years one channel already doesnt work, and it def isn't 2KW it clips very easily I would guess more like 50 or 75 watts.

You're hilarious! You'd be a great reviewer for a high end audiophile publication. Keep up the good work! And get monetized.

In other words just Chinese junk with false specs.