Super Bass Stereo audio Amplifier using PAM8403 | pam8403 5v amplifier bass

Подписаться 251 тыс.

Просмотров 641 тыс.

50% 1

DIY Super Powerful Stereo audio Amplifier using PAM8403 | pam8403 audio Amplifier
Super Powerful Stereo Bass Amplifier with PAM8403 module
Can the output power of the sound amplifier be increased?
In this video I show how to use the pam8403 module and how to amplify its output and build a 5 volt audio system for our car.
-------------------------------------------------------------
Click on the link to see more videos on this topic:
/ @skillmake
---------------------------------------------------------------
The PAM8403 is a 3W, class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus saving system cost and PCB area.
Image result for pam8403
------------------------------
Track: Naron - Imagination [NCN Release]
Music provided by NoCopyrightNation
Watch: • Naron - Imagination (I...
Stream/Download: ncn.ffm.to/naron-imagination
-------------------------------
About This Video -:
PAM8403
5 volt amplifier
mini amplifier super bass
how to make amplifier at home
powerful bass audio amplifier
how to make amplifier at home
how to make amplifier
___________________
00:00 pam8403 5v amplifier
07:00 audio Amplifier using PAM8403
#pam8403 #amplifier #superbass #ampli #audioamplifier #PowerfulStereoBass #skillmake
#miniamp #5vamplifire

Наука

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 646

@boseelectronicstrivandrum8086 2 года назад

♥️❤️❤️

@skillmake 2 года назад

thanks for comment 🙏🙏🙏 .mr??

@anishlifestyle123 2 года назад

@@skillmake 🥰🥰🥰😘

@rajbalachandran9465 2 года назад

ഇങ്ങനെ connect ചെയ്യാമോ? അടിച്ചുപോകില്ലെ?

@sausagedog52 2 года назад

these amps are already 4 ohm stable and youre running 8 of them into approximately a 1 ohm load, so each is probably seeing the equivalent load of an 8 ohm load. also youd get more power running them at their rated 5v instead of 3.7 or under load likely closer to 3v. also assuming they were all making their peak rated power you would be getting less than a typical car audio head unit.

@blackIce504 2 года назад

no crossovers on the speakers and those smaller speakers and tweeter would be working very hard getting the full frequency spectrum........Also each amp does not have any protection on its output thus some of the amps will be working harder then the others normally when you see multiple fets or amps you use a resistor to load balance. Oh well it was good for a laugh.

@thebanditgamer4865 2 года назад

each 1 of those little amplifier boards dont push out more than 3W at 5V. they are rated for 5W but they dont do more than 3W at 5V

@user-tt5tx1tk7s 2 года назад

Я извиняюсь, но это что за херня ?! Паралелить усилки да еще в таком количестве?! А резисторы с плюс питания на входы зачем?! что б помехи по питанию слушать?! Срочно отдать на проверку Доктору)))

@skillmake 2 года назад

it just for test 🙏👌

@Nextway93 2 года назад

Да это пиздец. Ещё нагромождение спикеров, разной мощности, разного сопротивления, все параллельно. Кажется, чела в школе научили только ПАРРАЛЕЛЯМ. Странно, что он не присоединил несколько входов и к ним несколько телефонов с одной мелодией не запускал параллельно

@Nextway93 2 года назад

Хаха ещё этот долбан думает, что там у него выдало почти 50W.Это наверное, какие то параллельные ватты, из параллельного мира

@P43L1j0 2 года назад

We almost can see the impedance say hello to those speakers... if you going to try this at home, please read about it...it save you a lot of trouble and a bit of money. Btw...you just need one AMP... not 8. Good video tho.

@utkarshchari7931 2 года назад

What is the key difference between 1 pam8403 vs 8 stacked pam8403 Does the power is increased sightly?

@skillmake 2 года назад

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 ru-vid.com/show-UCBoZGn08nBAxE9M5T53_UKg

@ReimuReimu_Animation 2 года назад

@@utkarshchari7931 It depends on the Supply Power and Impedance of the speaker [ I = V/R ] If your speaker type is 4ohm and your supply voltage is 5v then. [ 5 divided by 4 = 1.25A ] which means [ 5 x 1.25 = 6.25watts ] 1 amp of current 6W runs to the Speaker. Ex 2 If your speaker is 8ohm and your Supply voltage is 24v then. [ 24V / 8ohm = *3A* ] [ 24V x 3A = *72Watts* ] Ex 3 So if you want 1,000Watts 24Volts runs to your Speaker Coil and 4ohms speaker Impedance then. [ Watts / Voltage = Current ] [ 1000w / 24v = *41 Amps* ] Hope this helps to find a suitable speaker and amplifier and also power Supply DC to DC or AC to DC Supply Thanks for reading :)

@arielbene2013 2 года назад

@@ReimuReimu_Animation very well explained. .. So is there any point of stacking 8 5v amps over just 1 amp? They all get 5v 1A 4 Ohm anyway

@ReimuReimu_Animation 2 года назад

@@arielbene2013 yep it depends on the speaker ohm if it's 1 ohm then it's like a short circuit it will suck more current than 4ohm

@sunuk1915 2 года назад

Red wire basically use for right channel of audio applications

@AntonIntelligent 2 года назад

Жесть, невероятно, дайте автору премию за гениальность 😁😁😁😁

@skillmake 2 года назад

😂😂

@tank_v_tanke 2 года назад

Оскар за гениальность... А может 10 оскаров?

@TheKamarataboba 2 года назад

А лучше столько Оскаров - сколько Он плат запараллелил. 😁😁😁😁

@g-forsemanx4664 2 года назад

@@TheKamarataboba самое интересное что мощность как у одной микрухи по итогу все равно на выходе

@majorov89 2 года назад

@@g-forsemanx4664 и далеко не факт, что все усилки заработали, они ведь D класса и на выходе дросселя нет, фиг знает что с генерацией там происходит, уверен, что синхронно они не запускались

@ahyonvlogs 2 года назад

what value r those rwsistor and filter cap u put on Input leads ?

@skillmake 2 года назад

Details of all items are written below the video Dear friend

@maykevin5 2 года назад

8 stacked together and still barely enough to push a 20 watt speaker. Super Powerful!

@maximilianjuli4895 2 года назад

i highly doupt that the 8 amps could drive the two 300W speakers. at 5V the current supplied by the batterys would neet to be 120A . even if that were possible it would let those puny wires and speakers go up in flames imeadietly.

@pvanb291 2 года назад

Correct! This video is complete BS!! Super powerful my ass! :( I was doing an audio engineering course where the main amps we used were QSC and Crown 2400W RMS bridged into JBL SRX825s. Even that wasn't "super powerful". It's really just industry standard. Those 300W speakers are also bullocks. The way ratings are applied to car audio, you'll find they're around 25W RMS. Good video for comedic value I guess.....

@skillmake 2 года назад

@greyparrot5194 Год назад

@@maximilianjuli4895 So what do you think this is fake I m going to try it and i thinks a lot about it what if this isn't work Please guide me bro

@Ayushyadav-rq3bu 2 года назад

It's not fake it may possible but you need 5 volt 10amps adapter

@skillmake 2 года назад

Hello dear friend, yes, you are right, it has a high amperage

@lovneetsingh6664 2 года назад

@@skillmake if speaker has 4ohm resistance , then max current will be 1.25 x 2 = 2.5 amp, and current cannot go beyond that. simply its fake

@Roriloty 2 года назад

@@lovneetsingh6664 what if he use a lipo battery that can supply a lot of current thought 🤔

@lovneetsingh6664 2 года назад

@@Roriloty even if using lipo battery, the max current will be 2.5A. 5V cannot give more than 1.25A per channel. Simple ohms law I = V/R

@Roriloty 2 года назад

@@lovneetsingh6664 what if I connect multiple batteries in series would it work? (And thick wire)

@eviltechyt3962 2 года назад

Bro im using 3 pam 8043 amplifiers combined with mp3 bluetooth module and im using these amplifier with 25w speakers in pairs for one pam board but when heavy bass comes the voltage drops so can you 3 me a powerfull power supply to the boards.

@sugengpurnomo692 Год назад

Ini yg kucari.. benar2 meningkatkan daya .. bukan pakai modif tone control pasif yg hanya mengurangi/menghilangkan suara midhigh nya .. Kerennn..

@Manjitsingh-bs7or 2 года назад

When i have 5 board then which value of capacitor and resistance i connect?

@luckymono 2 года назад

nice job...how about another PAM's module?, have you got experience too?

@skillmake 2 года назад

I think it is the same in other modules👌👌

@shivsaini3562 2 года назад

मेरा भारत महान। जब तक आप जैसे नागरिक हमारे भारत ने है। कोई चाइना हमसे आगे बेहतर नही हो सकता। 👍

@skillmake 2 года назад

नमस्कार प्रिय मित्र, मुझे बहुत खेद है, अमल, मैं ईरान से हूँ, लेकिन मुझे आप जैसे भारत के दोस्त बहुत पसंद हैं 🙏🙏🙏

@shivsaini3562 2 года назад

@@skillmake मुझे वह सभी लोग प्रिये है जो सभी की सहायता और एक दुसरे की सहायता करते है बिना किसी स्वार्थ के मुझे किसी भी धर्म, पंथ, मज़हब , रिलीज़न और देश से कोई लगाव नही बस अच्छे और सच्चे लोग मिलने चहिते। ॐ

@botolbotol9984 2 года назад

@@shivsaini3562 ngomong apa sih

@naukapokojuteachpeace7251 5 месяцев назад

Yo Wanna be indian. Memory of arians is coming backto us....soon end of trials and tribulations. Replacement hoomans time is ending. I was always blown away that as a polish lad i was preaching vedic teachings to wanna be indians who should understandit deeper than me...or do they ? Truth is coming to the surface. What's then. Are you panicking ? Cuz im excited.

@naukapokojuteachpeace7251 5 месяцев назад

And that moon landing done in a style of power rangers from 90s 😂

@nurulilham1901 2 года назад

Would you mind making pam8610 parallel? I tried them but failed. Thanks.

@skillmake 2 года назад

Maybe I will test in the next videos🙏🙏

@nurulilham1901 2 года назад

@@skillmake I am waiting for your actions.

@ahyonvlogs 2 года назад

wont the ics get hot easily on that setup?

@skillmake 2 года назад

no dont get more hot me ahyon🙏🙏🙏

@mogaja7629 2 года назад

gracias por el aporte, con el PAM8610 se podría conectar de la misma forma

@vitaliy.af_ 2 года назад

2 таких слабых аккумулятора не подходят для этого, их не хватает. 1 аккумулятор 18650 намного лучше подходит так как он сможет выдать 10 ампер спокойно

@skillmake 2 года назад

👌👌

@llewellyn56 2 года назад

that's insane but awesome. great video.

@donMcDice 2 года назад

I want to diy multi connection splitter for audio signal.Sir can i use caps,resistor plus 5v supply.just like what you did sir.

@vijaykumar-np8qq 2 года назад

Great innovation... Keep it up 👍. love you from India 🇮🇳 proudly..

@skillmake 2 года назад

Thanks mr Kumar thanks for watching

@erandayohan3845 2 года назад

Do you hear some noice in the circuit. Because i have this amplifier. But i connected before my phone its hear big noice. How could you achieved that

@skillmake 2 года назад

If you want to hear less noise, I recommend using a battery to power the module.🙏🙏

@cartoonz_wrld_243 10 месяцев назад

Bro we can add bt decoder ?

@vempatapumanikanta4737 2 года назад

Bro can i use Two 8ohm 10w speakers and two 3w speakers and one 45W speaker with Three PAM8403 ?????

@molun6204 2 года назад

Each module has only 3W, and 8 PAM8403 modules are superimposed and connected in parallel. How much W is this driven?

@skillmake 2 года назад

hi mr yan jun around 24+24watt

@molun6204 2 года назад

@@skillmake Thanks for sharing

@sleepy9817 2 года назад

Huh 3.7v =24w, hardly 5w maybe

@mirzaalihassan4129 2 года назад

@@skillmake are u made All boards become dead if we use in parallel or series

@mirzaalihassan4129 2 года назад

@@sleepy9817 no waats it become dead

@Indian_Speaker_Guy 2 года назад

Wow that's cool concept, i think you should try with more powerful amps that would be pretty amazing if it turns out to be working properly 😍👍

@skillmake 2 года назад

That's the plan!

@pmcmalec 2 года назад

you can't bridge every amp, check datasheet!

@SkorchGameWoT 2 года назад

can you connect everything in the same way, but with only 1 amplifier? I wonder how much the result will be different

@skillmake 2 года назад

You can test it

@SkorchGameWoT 2 года назад

@@skillmake No, i don't can)

@lukaszeilinger1353 2 года назад

1 amp will not be able to handle a load with is below 1ohm.

@utkarshchari7931 2 года назад

Yeah please do 1 vs 8 pam8403

@dammdaniel9953 2 года назад

As an audio engineer with 10+ years of experience i can definitely say you dont have any research knowledge on how amplifier and speakers ohms works and matter in audio . I won't say stop doing what you love but learn for your past experience and improve yourself

@2fathomsdeeper 2 года назад

Unless some of those drivers are 16 Ohm, those amps have got to be frying! I know one of those drivers was 4 Ohm. 30+ in audio!

@skillmake 2 года назад

@pathmakumara1279 2 года назад

Congratulations from the bottom of my heart I do a good job for you

@pathmakumara1279 2 года назад

Please help me write down the ICs I need to fix this

@skillmake 2 года назад

🙏🙏🙏

@mihamihavich6802 2 года назад

Great work. It was interesting. Now i know what i will do tomorrow))

@skillmake 2 года назад

Good luck!

@lovneetsingh6664 2 года назад

fake hai bhai...thodi electronics parh k dekhlo pehle

@msatransportesrapidos 2 года назад

Os alto falante foram ligado em paralelo. Qual a impedância final ?

@skillmake 2 года назад

Olá querido amigo, acho que a potência de saída é de cerca de 48 watts

@erickdavid9541 2 года назад

@@skillmake dijo IMPEDANCIA, no potencia. Poner todas esas bocinas en paralelo debe sumar menos de 1 ohm. Fatal para muchos amplificadores.

@AmanAman-bg8bl Год назад

Genious I need a help, I choose speakers which is, 1 subwoofer 4ohm 25 watt and 2 full-range 4ohm 15w. So how many of pam8403 I need to perallale? I want to know the calculation for my understanding.

@jyotirani8232 2 года назад

Wow, great 🧡🧡

@skillmake 2 года назад

Thank you 🤗

@timextoxicgaming20 2 года назад

@arendelle_ok 2 года назад

why u add resistor and capasitor between ( + ) and L R audio input

@skillmake 2 года назад

To increase the input power of the amplifier

@edoprastyo8836 2 года назад

I tried it, but it doesn't sound. Can you give me a solution please?

@daftpunk1270 2 года назад

Why you added capacitors and resistors? What they do?

@skillmake 2 года назад

Hello my friend, we are doing this to increase the input power

@rscualo4859 2 года назад

@@skillmake the capacitors and resistors will help to avoid the distortion? when you up the volume?

@madax7540 2 года назад

Ya konsi tar hai jisse apna audio bord connect kara hai

@janzmicrotronix5397 2 года назад

try to use 5V 3A power supply with 470uf filter capacitor instead of parallel 3.7V mobile battery for better bass... in my own opinion 😸😸

@skillmake 2 года назад

🙏🙏👌👌

@mr.soundcraft822 2 года назад

Very good keep it up and do many videos about audio

@skillmake 2 года назад

Hello dear friend, thank you for watching a lot of videos about amplifiers and Bluetooth speakers. I will make a video🙏🙏👌

@noumanumar7305 2 года назад

Can we use less than 8? Say like 3,4,5?

@ourchannel8215 2 года назад

Many parallel speaker can get short circuit...try used just max 2ohm...

@skillmake 2 года назад

hi mr ary yt thanks for comment 🙏🙏

@jj74qformerlyjailbreak3 2 года назад

Sir I appreciate your talent. Thanks for paying it forward by sharing. Also I love channels who interact with the comment section. Your light shines bright even through these digital boxes we find ourselves trapped in from time to time. God Bless.

@skillmake 2 года назад

thanks 🙏🙏🙏 mr jailbreak?

@yurianhuizing2352 2 года назад

He has no talent...

@ricardocano3439 2 года назад

porque no hiciste la prueba con parlantes en caja acustica

@chrisredfield5278 2 года назад

why did you connect two inputs to 5v pin with caps and resistors. ?

@skillmake 2 года назад

for increased input power

@chrisredfield5278 2 года назад

@@skillmake Thank you..

@skillmake 2 года назад

@@chrisredfield5278 ❤️❤️

@niltongalvaodesouzapintone8335 Год назад

Ola tudo bem? a utilização deste capacitor seria para essa divisão de frequencia? ou apenas para ruido?

@oincrivelmundodetuco4769 Год назад

Ele usou aqueles capacitores para desacoplamento de som

@nicolasjosechaves7345 2 года назад

como instalo un potenciómetro junto a un modulo Bluetooth?

@harjeet4522 3 года назад

Which value of capacitor uf and volt

@skillmake 3 года назад

22microfarad and 16volt

@harjeet4522 3 года назад

@@skillmake thanks

@dirtyboy8336 2 года назад

That was amazing. I be looking at solder guns online wanting to buy one because I want to do this type of work someday I know it looks easy but it takes time to learn

@skillmake 2 года назад

@sultanmulyono4781 2 года назад

Klo dipakai utk subwofer bisa.

@utsavsarkar604 Год назад

I have 1x8ohm , 2x4ohm speaker how many pam 8403 do I need and how much power supply does it need ?

@SenTirTv07 2 года назад

Keren ... mantap .... kreatifitas tiada batas.... Salam kenal dari Lereng Gunung Slamet saudaraku

@skillmake 2 года назад

🙏🙏🙏

@saudmughal904 2 года назад

Shorting amplifier output with other amplifier. Nice.

@skillmake 2 года назад

Yes, thanks

@indotecdiyelektronic3331 2 года назад

Hello can you help me? I tried to make that project but once it's done there is no sound I'm using 5v voltage where is the problem?

@skillmake 2 года назад

use battery

@urnoob5528 Год назад

@@skillmake wow this will sure solve his problem, u wasted so many people s money and time, now they get a trash

@greyparrot5194 Год назад

Sir i have a question I got an amplifier of 15W+15W output and connect 5W speakers on it but when i open volume my speakers start cracking why May i have to connect 15W speakers on it?

@skillmake Год назад

Use a higher powered speaker and control the input

@thepolymorphicaris1939 2 года назад

Hi, can you please suggest me a good Bluetooth audio amplifier?

@skillmake 2 года назад

module or speaker

@fabdab5472 2 года назад

Kya 8 PAM module 4-4 speakers dono taraf ke liye theek hai. Matlb IC kabhi kharab to nhi hogi volume bhadane se

@skillmake 2 года назад

हाँ य़ह सही हैं

@Pinky_cat022 Год назад

Untuk Aisi nya apa gk apanas bg?

@ruhinmasruhin5076 Год назад

R220k connected to vcc? Explain please

@gagan_jit7897 2 года назад

This is called real experiment full fun with dis

@skillmake 2 года назад

thanks

@xniladrix 2 года назад

Concept of connecting resistor and capacitor I couldn't understand. If I want to add more than eight boards then which the value of resistor and capacitor I have to choose.

@skillmake 2 года назад

@gagan_jit7897 2 года назад

Make video on pam8610 amp board (use 6 board of pam8610) plzz requested man and do this same experiment

@skillmake 2 года назад

okkkkk🙏🙏

@djnoisechile Год назад

a eso se le llama conexion modo bridge ?? esto incrementa la potencia manteniendo el voltage pero aumentando el consumo en miliamper, ciero ?

@Bhilortok 4 месяца назад

How many volts for the Elcho/capacitor?

@KupuJlJl-OJleroBu4 Год назад

Секрет очень простой, мощность что одной, что двадцати в паралелить будет одинаковая, тут хитрость в другом, динамические головки все в параллель, а это по сопротивлению будет менее одного ома, что и даёт прибавку в мощности)))

@maheshkhuman2880 2 года назад

How do you use this class d amplifiers in parallel connection

@skillmake 2 года назад

Hi dear friend, this video was for testing and it worked❤️❤️

@hychayt 2 года назад

Creative👍

@skillmake 2 года назад

Thank you 🙂🙏🙏

@user-ic9bs5wr8w 2 года назад

สุดครับ

@skillmake 2 года назад

thanks mr

@yagneshpatel1183 2 года назад

It work give 24 watt per channel but also impedance became 32 ohms so use for tweeters 16 ohms in series . You just parellel amp but also you need some balance resistor for futher protaction to balance gain

@skillmake 2 года назад

Thanks for your help, this video was for testing

@niadaniati4208 2 года назад

😲Amazing 👏👏👏👏👏👍👍👍👍👍

@skillmake 2 года назад

Thanks 😄

@iwanasyari5838 3 года назад

Nice

@skillmake 3 года назад

Thanks mr asyari

@eddiesutharno44 2 года назад

Mantap 👍

@skillmake 2 года назад

🙏🙏🙏🙏 thanks

@KuntalGhosh 2 года назад

U know the channel is full of shit when a "free energy genrator" tag comes up on the corner 🤣

@skillmake 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GIQCkZjNtyw.html Hello dear friend, please be sure to watch this video to understand the case. I made this video just to inform you. 🙏🙏🙏 thanks please watch video from links 🙏🙏

@gaweown Год назад

Sambil makan sahur hadir dan menyimak menambah ilmu,salam sukses selalu

@_tanveer__111 Год назад

Bro why you use capacitor in the circuit?

@Bhilortok 4 месяца назад

How many volts for the Elcho/capacitor?

@gedearya1232 2 года назад

Mantap

@skillmake 2 года назад

🙏🙏🙏👌👌❤️❤️

@defproject07 2 года назад

Ada orang indo juga ya😂

@JaviersDIY 2 года назад

Nice one sir

@Wonoketingal 2 года назад

wow cool

@skillmake 2 года назад

thanks 👍

@ReimuReimu_Animation 2 года назад

I think 1 amplifier is enough It depends on the Supply Power, Impedance of the speaker and also Voltage. [ I = V/R ] If your speaker type is 4ohm and your supply voltage is 5v then. [ 5 divided by 4 = 1.25A ] which means [ 5 x 1.25 = 6.25watts ] 1 amp of current 6W runs to the Speaker. Ex 2 If your speaker is 8ohm and your Supply voltage is 24v then. [ 24V / 8ohm = *3A* ] [ 24V x 3A = *72Watts* ] Ex 3 So if you want 1,000Watts 24Volts runs to your Speaker Coil and 4ohms speaker Impedance then. [ Watts / Voltage = Current ] [ 1000w / 24v = *41 Amps* ] Hope this helps to find a suitable speaker and amplifier and also power Supply DC to DC or AC to DC Supply Hope will help your Calculations and also it Depend on the volume the Amplifier voltage drop because some of energy may not go through the speaker rather to Heat Due to Parasitic Inductance and Resistance of the speaker and Amplifier Components :)

@BMA_YT 2 года назад

@ReimuReimu_Animation 2 года назад

Ex 3 is basically Wrong calculation but ex 2 and 1 is obviously correct.

@ReimuReimu_Animation Год назад

@Black Pepper Usually your correct it depends on the wattage or impedance of the speaker so you can connect this tiny amplifiers in pararel so the components won't heat up and delivers more power depending on your supply power and the output voltage won't collapse :]

@AmanAman-bg8bl Год назад

@Black Pepper can you give a calculation. Then we can choose the amplifier according to speaker. You can give us 1 or 2 example like he did.

@AmanAman-bg8bl Год назад

@@ReimuReimu_Animation can you give a calculation. Then we can choose the amplifier according to speaker. You can give us 1 or 2 example like he did.

@nguyentuan0712 3 года назад

Làm ×100 đi bạn

@skillmake 2 года назад

😮😮😮😂😂

@darkside7786 2 года назад

Try X 100 bro . I think very interesting than X 8 👍👍👍 I wait next ur videos X 100

@skillmake 2 года назад

@@darkside7786 💪💪💪🙏🙏ok ok mr johan ❤️❤️❤️

@darkside7786 2 года назад

@@skillmake i waiting for next X100 bro 👍👍👍💪💪💪

@felipemontano2803 2 года назад

Donde sé puede comprar direcciones por favor felicidades por su video

@skillmake 2 года назад

🙏🙏

@mdi-vo7oc 3 года назад

Best of the best

@skillmake 2 года назад

thanks

@los___santos 2 года назад

İs this possible for pam8610 ?

@skillmake 2 года назад

@Ayushyadav-rq3bu 2 года назад

Maine bhi socha tha ye idea but kbhi try nhi kiya

@skillmake 2 года назад

🙏🙏🙏mr ayush yadav

@yasinmuhammad442 2 года назад

capasitor 22uf how much volt?

@skillmake 2 года назад

16 volt

@jorge5k 2 года назад

Brasil ❤

@skillmake 2 года назад

Obrigado pelo comentário

@boombok2diy31 2 года назад

ใช้เป็นแอมป์โมโน100วัตต์หน่อยครับ

@skillmake 2 года назад

ok mr phonkrit 🙏 thanks for comment

@user-nh9hj4wz7s 2 года назад

WOW~! Thanks for the good video~!^)^

@skillmake 2 года назад

Thanks for visiting❤️❤️

@PenguinDIY 3 года назад

goooood

@skillmake 3 года назад

Thanks mr 😘😘

@fhxhxjghcdgshfj3765 2 года назад

Can I used pam 8610???

@skillmake 2 года назад

👍

@Iwan-ph8bb 2 года назад

MANTAB BOSS .

@skillmake 2 года назад

❤️❤️👍👍

@rafafaeyza6316 2 года назад

Keren bang..kl di pakein 2 sub ngangkat g itu bang pam nya...

@skillmake 2 года назад

yes gooood

@DashCamCarCompilation 2 года назад

دمت گرم داداش باحال بود موفق باشی

@skillmake 2 года назад

مرسی داداش

@rye3804 2 года назад

Maybe you must try tda7388 to make multi channel amplifier

@skillmake 2 года назад

Thank you for your comment

@dfn03 2 года назад

Just about 5W is the maximum output since the voltage doesn't get any higher. 5 volts divided by 4 ohm speaker is just a bit over 1 amps. 5 times 1 is 5(Watts). RMS power is even lower!

@skillmake 2 года назад

it's only for test

@dfn03 2 года назад

@@skillmake But you are telling to people that each additional amplifier adds to the overall output power, which is NOT true and is misleading!! I've been reading your comments... Not very honest