No video :(

Super Easy 3D Printed Arduino CNC Drawing Machine | GRBL Plotter Elegoo

Подписаться 112 тыс.

Просмотров 822 тыс.

50% 1

3D Print your own high quality Arduino based CNC drawing machine. Easy and budget friendly. Use it to draw on almost anything. I'll step you through how to build your own including all the files you need. 👇 More info below 👇
This project has a relatively low cost and can produce some very detailed drawings. I've used it to create t-shirts, cake decorations, drawings to colour in myself (and some it coloured in for me!). You could also use it to draw out scale drawings, wedding invitations, birthday and Christmas cards and anything else you can think of. :)
A second video covering uploading the code, creating drawings, and sending them to your machine is available here: • Part 2 - Super Easy 3D...
3D printing files: www.prusaprinters.org/prints/...
List of items used in this project and where to find them:
■ 8 x15 x 45mm Linear Bearing (x2): geni.us/LinearBearing45mm
■ 8 x 15 x 25mm Linear Bearing (x1): geni.us/LinearBearing25mm
■ 12v Nema 17 stepper motors (x2): geni.us/StepperMotor
■ GT2 Timing belt and pulleys: geni.us/TimingBelt5m
■ Micro servo (x1): geni.us/MicroServo
■ Elegoo Arduino Uno (x1): geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): geni.us/NutsAndBolts
■ Stepper drivers - TMC2208 (x2): geni.us/TMC2208
■ Contact switch (x2): geni.us/ContactSwitch
■ Arduino CNC Shield (x1): geni.us/ArduinoCNCShield
■ 30mm 5V Fan (x1): geni.us/30mm5vFan
■ 8mm Chromed Steel Rod (35cm x2 & 5.5cm x1): geni.us/8mmChromedSteelRod
■ 30cm long linear rail with block - MGN12H (x1): geni.us/LinearRail300mm
■ Electrical wire: geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): geni.us/FemalePowerBarrel
■ 6mm Idler Wheel - 3mm Bore (1): geni.us/6mmIdlerWheel3mmBore
■ Wooden panel to mount project at least 36x42cm (I used an Ikea ‘LÄMPLIG’ chopping board)
■ Sharpie Pens: geni.us/Sharpie
■ 3D Printer Filament: geni.us/3DJake
(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)
Nuts, bolts and screws needed:
■ M5 x 25mm (x2)
■ M3 x 18 (x3)
■ M3 x 12 (x2)
■ M3 x10 (x3)
■ M3 x 6 (X14)
■ M3 nuts (x9)
■ M5 nut (x1)
■ Short wood screws (x8)
Support future projects, see DIY Machines' Amazon Wish List: www.amazon.co.uk/hz/wishlist/...
I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: shop.prusa3d.com/#a_aid=diymac...
Prusa support my channel when you use that link at no cost to yourself. :)
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
==========
The code, wiring diagrams, 3D printable parts etc can be downloaded for free from here:
www.diymachines.co.uk/arduino...
www.prusaprinters.org/prints/...
The drawings I created for use with my machine:
geni.us/EtsyCNCDrawingFiles
Inkscape 0.48.5 for Windows:
inkscape.org/release/inkscape...
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
Support us on Patreon: / diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ / @diymachines
DISCORD server: / discord
INSTAGRAM: diy_machine...
FACEBOOK: / diymachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 696

@bobprince1472 3 года назад

This video is a model of how to give a clear and comprehensive explanation of a technical task. Clear, comprehensive and concise.

@DIYMachines 3 года назад

Thank you for your kind words Bob, I am trying hard to make clear videos for popular projects. :)

@Michelle-ep3mi 3 года назад

Agreed. I'm a beginner and even that made me think I could actually do this. The instructions were so clear.

@DIYMachines 3 года назад

@@Michelle-ep3mi Thank you Michelle. :)

@noreply370 3 года назад

I agree on that.

@tristanreid 3 года назад

The level of care to detail is so amazingly high in this video - WOW. I appreciate the helpful tips to help you ensure everything has worked correctly, such as the troubleshooting steps for the belts, and the continuity test of the contact switches. This is particularly remarkable because it the most complicated build that I have ever seen that is made so accessible to an absolute beginner. If you have access to a few basic tools (glue gun, screwdriver, soldering iron, multimeter), you can make this.

@DIYMachines 3 года назад

Thanks for the kind words Tristan, I worked hard to make it all as clear as possible.

@TeslaDIY 4 года назад

This looks like a fun project, yet very intensive, but your step by step is very clear as usual, making it easy to follow

@aronkerr Год назад

Thank you for making this. My daughters and I are working through this over summer break as a fun intro on 3D printing, programming, and electronics. All your tutorials are fun and a perfect size to tackle with kids.

@sapitron 11 месяцев назад

did you complete the construction? is the build operational?

@PetterBruland 3 года назад

Thank you for taking the time to produce your excellent videos. Perfect pace, clear voice, good explanations on how to do and what to expect. Thanks!

@DIYMachines 3 года назад

You're welcome. Thanks for the comment. :)

@ecmphg 3 года назад

what he said

@rusticagenerica 11 месяцев назад

It's really beautiful how you did the beautiful circular traveling to show the items. Also, I love your decoration, in orange. And last but not least, your 3D printing videos are SO NICELY put together. Well done to you !

@rensvanbreukelen3762 3 года назад

I don't know why, but watching this video just put a big smile on my face. This is 100x better than any Bob Ross video!

@DIYMachines 3 года назад

Haha, thanks. :). I tried to follow a Bob Ross painting once - I have destroyed any evidence that I tried, it did not go well for me. :/

@clarkso65 3 года назад

This is how you tube must be!!! Concise, straight to the point tutorial. Thanks for this amazing tutorial :))

@DIYMachines 3 года назад

You're very welcome, thanks for watching. :)

@seco301 Месяц назад

Thank you very much, finally a video of this type that leaves the files in 3D. Greetings from Chile

@OgbondSandvol 2 года назад

What a calm and instructive video! Louis presents the video sitted in a sofa in a clean and wide room; although he show some parts and tools in real time, most of the real images from the project were taken before and are voice-overed, so, he doesn't talk at the same time he build the parts. The quality of the images is superb, and the images have no distracting "garbage" in background. The video from the building parts is accelerated or slowed, the camera angles changed, according with the complexity of the subject. Very good!

@DIYMachines 2 года назад

Thank you for the compliments, I'm glad you enjoyed the video.

@bikefarmtaiwan1800 3 года назад

What a great channel- engaging educational and fun! Hard to make such a splash in an environment filled with talented contributors. Well done !

@DIYMachines 3 года назад

Thank you for the kind words Bikefarm. :)

@codewithlenny 3 года назад

This explanation was by far, the best I watched and listened to. Thank you so much for the extra effort you put in the camera angles, etc. to ensure we could see everything. I have always been fascinated by CNC machines, I can't wait to finally build one! I have also immediately liked the video and subscribed to your channel.

@DIYMachines 3 года назад

Thank you LennyLen. :) I'm glad you appreciated the effort.

@Glacialsss 3 года назад

Same

@ndnplaya1222 3 года назад

Can this be converted to be a 3D printer as well?

@waynechenery707 2 года назад

Hi Lewis I really like on how easy your plotter is to setup etc I’m just wondering have you ever considered adding a extra piece so a laser module could be also added ?

@manofsan 2 года назад

@DIY Machines - hi, if you can make a plotter like that, then could you also make a CNC tape-laying machine for making carbon fiber parts out of carbon fiber tape? See this company's approach to doing it with a desktop machine: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UUyskxP_9NU.html (see 19:00 in video, for some details).

@Ed19601 2 года назад

Great project. I saw another pen plotter on youtube that could actually automatically change colors, nifty, but the X-axis (or the Y axis, depending how you look at it) was just a bit unstable and was begging to be supported. In your design, the free hanging axis seems much sturdier and stable

@ClownWhisper 2 года назад

This is exactly how all engineering should be its simplistic perfection. This is unbelievably streamline robotics at its finest.

@DIYMachines 2 года назад

Thank you, that's very kind to say as such. 😊

@handsomebeast4040 3 года назад

Wow what a nice project very clean and perfect i have watched 100+ videos about cnc plotter but this one is my best

@DIYMachines 3 года назад

Thanks a lot 😊

@brendonhodder4812 4 года назад

Another awesome project, can't wait to get started on this one. Keep up the good work!

@DIYMachines 4 года назад

Brendon Hodder Thanks. :)

@NicJon 3 года назад

I just ordered all tools for that printer from amazon and i am just printing the 3D Parts! Great Tutorial! So underrated! Didn't find such a great video in a long time!

@DIYMachines 3 года назад

Awesome! Thank you!

@NicJon 3 года назад

@@DIYMachines Thank YOU! Haha!

@NicJon 3 года назад

I got a problem! My pen holder is too loose! It doesnt stay in place! It goes right and left depending on which direction the printer is driving! My prints are very inaccurate! Do You maybe know a solution for that?

@kentklapstein9879 2 года назад

Excellent! Great video work, great instruction! I haven’t seen this technique of securing the belt before.

@hc5271 4 года назад

just bought and assembled all the hardware and electronics components and waiting for the follow up video this is the best diy drawing machine tutorial on the internet.

@DIYMachines 4 года назад

Thank you. I' should have the second part video completed and uploaded this weekend. I'd love to see a photo of yours when complete - it might be the first one built other than mine. :)

@hc5271 4 года назад

@@DIYMachines ha ha ha sure but it doesn't looks as pretty as yours does

@DIYMachines 4 года назад

@@hc5271 Just a couple more days and the video will be complete.Thanks for the patience.

@DIYMachines 4 года назад

@@hc5271 Here is part 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8scKLHz77Lg.html

@farlandercd 3 года назад

How much did the whole thing cost ya?

@jeanraines3215 3 года назад

The best construction video I have seen all parts are listed and given with supplier the assembly is easy to follow as explained and demonstrated

@DIYMachines 3 года назад

Thank you Jean for the recommendation. :)

@garagemonkeysan 4 года назад

Nice engineering. Great video, well shot and staged. Mahalo for sharing! : )

@DIYMachines 4 года назад

Thank you. :)

@wojwoj06 3 года назад

Fantastic delivery, fun idea, top notch quality.

@DIYMachines 2 года назад

Much appreciated! Thanks.

@rikardfrid2679 2 года назад

so everything printed just wait for the components great video

@worldupdates9742 3 года назад

This the better one explanation that i ever seened

@beatrute2677 Год назад

Nice presentation and cool project. Those 3d prints are real nice!

@DIYMachines Год назад

Thank you! Cheers!

@CimboAkinci Месяц назад

Liked and subscribed for the timing belt assembly

@forMakers 3 года назад

I wanted to make it, but I’m really impressed because the video is easily explained

@DIYMachines 3 года назад

Thanks 😊

@ChunkySteveo 3 года назад

Really well thought out design and build! Nice!!

@DIYMachines 3 года назад

Thank you Stephen. :)

@simonebonfanti7290 Год назад

Just great! Very nice video and elegant design. Thank you very much, your job is very inspiring. I look forward to build one as well.

@DIYMachines Год назад

Awesome, thank you.

@donaldklopper 3 года назад

Wow. Fantastic narration and video, not to mention the rest.

@DIYMachines 3 года назад

Thank you Donald. :)

@xxx-xp1cq 3 года назад

You explained it well and in great detail.

@satina1169 3 месяца назад

this is so cool I want to build it at some point

@gianpietrovairo3557 5 месяцев назад

Great and beautiful job!

@guywhoknows 3 года назад

One of the better design print/writers and neatest designs. I think the axial motor mounts could have had slots to mention the belt. And I think the pen end could have been attached directly to the head, with a gear, or swivel arm to lift and drop it. I think I would have built up the shield before mounting the Uno so alignment is easier. But then you can't get the screws. And as a small part of design, the slid bearings, rather than using cable ties, a small screw could hold them there if spaced far enough away to just catch rather than misalign. Keep up the good work.

@ThePeriodicTableOfElements 4 месяца назад

this is clearer than the waters in the Dead Sea. Thank you so much

@imjustger 3 года назад

Great design!

@leagueleaders 3 года назад

great project mate thanks for sharing! Will make for a fun future project for myself.

@DIYMachines 3 года назад

No problem Justin. :)

@willieow3298 Год назад

Just found your channel, Thank you making it with such detail !

@DIYMachines Год назад

You're welcome and thanks!

@medyk3D 3 года назад

Very well made. Both the video and the macine.

@ankitmr47 3 года назад

Nice work sir doing great job of teaching people for free. Keep posting such content Lots of love from India

@DIYMachines 3 года назад

Thank you Ankit - I'll keep working on projects and sharing. :)

@deepakchaudhary3647 3 года назад

Thank you so much 👍👍👍 awesome mini cnc

@colormaker5070 10 месяцев назад

I bought all the parts on your list and am very excited to build this. I am working on a frosting pen that will extrude red,green and blue frosting into a small mixing head to extrude a variety of colors to draw on cookie- cupcakes and cakes. Your videos are so easy to watch and understand.

@MertCadet 4 месяца назад

Did you do? Does it work?

@colormaker5070 4 месяца назад

@@MertCadet I am still working on the design but it does work. Frosting pumps work great but the mixing head needs work as the frosting comes out in stripes like toothpaste not a well mixed color. The larger mixing head did a good job but requires too much purge before chosen color extrudes.

@Abdullah-td3ew 3 года назад

Thank your for the detailed video

@franciscovallaperde4489 3 года назад

CONGRATULATIONS, EXCELLENT DEMONSTRATION, SHOW !

@DIYMachines 3 года назад

Thank you Francisco. :)

@Jocham2013 3 года назад

You are a good teacher thank you for your good work!

@DIYMachines 3 года назад

Thank you. :)

@johnathen3504 3 года назад

this soo helpful !!! wish i discovered this channel earlier !!

@ameershaikh8558 4 года назад

Hello Louis I m ur new subscriber, ur way of explanation is too good. I m loving ur videos. Waiting for the part 2

@DIYMachines 4 года назад

Thanks for subscribing Ameer. Part two will be complete in just a couple more days. :)

@johnrichards3235 3 года назад

You sent me a link on the patron app. I ordered from Amazon, I have the rods and now I’m getting ready to assemble the machine soon. Thank you Lewis. I’ll take pictures of my progress and let u know and see.

@DIYMachines 3 года назад

Hi John, thanks for letting me know. Id love to see it when you have completed it.

@joetke 3 года назад

OMG! How can I qualify this? Great job? surely. Instructive and helpful too. Neat and detailed. A fantastic and serious pedagogy on top. Thank you Sir! Sharing had never been so real indeed. I just discovered your channel and its pretty valuable posts. You deserve a much better visibility/exposure.

@DIYMachines 3 года назад

Wow, thank you! I'm glad you enjoyed the project. Thanks for subscribing. :)

@geospectrum 3 года назад

Just got mine finished. Works a treat. I have modified the pen holder by the addition of a compression spring which helps the pen engage on the paper when the servo releases. I also don’t use belt on the pen, just two plain pulley wheels and a length of fishing line between the pen head and the servo. I 3D printed a small support for the pilot wheel at the servo end.

@aumpalosa Год назад

Hey, I was just questioning why do we need the belt for the pen myself, it seems it could be simplified by putting the small servo motor on the same pen holder. Could you share any ideas on how you removed the belt?

@conductiveinkalternative918 3 года назад

Love the build ,Thanks.

@DIYMachines 3 года назад

No problem, thanks for the kind words.

@CanabraGalhardo 3 года назад

Parabéns um dos melhores vídeos que vi sobre cnc ,o duro que aqui no Brasil é a dificuldade em comprar os componentes pra construção de uma ,ainda conseguirei montar uma se Deus quiser

@edfranksilva8557 3 года назад

Sou de Manaus Amazonas Brasil Obrigado pessoas como você fazem a diferença no mundo

@Fjyclydjgu 3 года назад

Очень классная задумка, прям в кассу :))

@voDKaandEric 3 года назад

that is some great content.. thanks for sharing and am going to try it

@DIYMachines 3 года назад

Thank you. Hope you enjoy using it. :)

@selvappriyaabhavaanee117 3 года назад

Dear DIY Machines, This is the first video I am seeing from your RU-vid Channel. Crisp and Crystal clear videography catches the eyes instantly. And still more Crystal clear audiography catches the ears without any hitch or glitch. I wonder your recording studio must be equipped with the most modern media gadgets. Thanks for both. Your way of describing a, even though you dub "Super Easy", this is indeed somewhat complex design, is simply fascinating! Stream like narration without any drag, is all the more informative. Even at first run, I was able to absorb th key points easily. Assembling a technical machine that is going to be assembled from raw components, with this type of oral guidance is, of course, as you names, "Super Easy!" Apart from the electronics and software sections, the construction fairly uses 3D Printing for many parts. So, no cutting, grinding, polishing, milling or drilling. A very nice method. Congratulations form an ardently ardent DIY Techie from the seventies!! I am about to do this. But I hope you will publish the programming section and the electronics section soon. Please make this video complete is all aspects. Thank you very much!!

@DIYMachines 3 года назад

Hi, thank you so much for your kind words. I work hard on the projects and the videos and it's so pleasant when someone takes the time to say a few kind words. The second video can be found ere: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8scKLHz77Lg.html

@thejashthejash4000 13 дней назад

sir, problem how to clear error this type 08:44:05.465-> error: 2 08:44:28:27.883-> error: 9 Motor not running pls help sir

@mmoci81 3 года назад

Like this video, subscribed, keep up great work. Very detail video as well as video description with all parts. Would be nice to see same machine as CNC for wood or metal.

@ensinoderoboticaeletrotecn5873 3 года назад

That was awesome!!!!

@DIYMachines 3 года назад

Thank you. :)

@jenkeller7311 3 года назад

Thank you for the expressive video! I am trying to make my own right now, but I can not find the 3d printed part called the servo end. I have found everything else. Great job on making the video clear and understandable. Thank you!

@rusticagenerica 11 месяцев назад

May God bless you for this awesome video.

@infinitech8 2 года назад

Super interesting Thanks so much

@AliyazHandicrafts 2 года назад

The great person who is delivered the Excellent information. ❤️ ❤️ ❤️

@DIYMachines Год назад

Wow, thank you!

@TheMrjogas 3 года назад

I will make for my son.great video .waiting for my 3d printer :)

@DIYMachines 3 года назад

Great 👍🏼 Lucky him - I've not seen mine for a few days whilst the family have been playing with mine over Christmas.

@peevonb7070 4 года назад

Thanks man! Awesome videos.

@DIYMachines 4 года назад

Thanks Pee VonB :)

@narpat007 2 года назад

your presentation is really awesome !

@DIYMachines 2 года назад

Thanks a lot 😊

@journeyofexperience574 3 года назад

Thats awesome, thanks for explaining

@DIYMachines 3 года назад

No problem.

@bongwelt4903 3 года назад

Awsome flower

@allcrafter3747 4 года назад

Thanks for your great work!!!

@DIYMachines 4 года назад

You’re welcome.

@JulianMakes 2 года назад

Awesome video! Ciao

@testizoizo7373 3 года назад

Nice project 👍

@hstrinzel 2 года назад

GREAT project! Wow.

@DIYMachines 2 года назад

Thank you! Cheers!

@adiidahl 3 года назад

Amazing!

@ArtandPianoTF 2 года назад

Really good explanation! Would the motors and electronics also be suitable to build the machine upright (with counterbalance) in bigger dimensions - e.g. for drawing DIN A1 (594 x 841 mm)?

@HOLLYWOODlosANGELES 3 года назад

*La présentation est très bien réalisée. Çà donne envie de réaliser la machine!* Merci.

@DIYMachines 3 года назад

Vous êtes les bienvenus et merci pour les aimables paroles. :)

@khanreckless3895 3 года назад

Hey you know what....i like what' s you doing mate.subscribed :)

@DIYMachines 3 года назад

👍 Thanks KHan.

@b_peters 3 года назад

very well made love it👌

@DIYMachines 3 года назад

Thank you Bennet. :)

@Ricardo-xc6wd 3 года назад

Nice filming, edition, light, explanation, content,...

@DIYMachines 3 года назад

Thanks Ricardo, kind of you to say so. :)

@BSK_A_Learner 3 года назад

Your explanation is good for me ,then I have clicked subscribe button 👍👍👍

@DIYMachines 3 года назад

Thank you so much 😀

@cintajayaservice7464 3 года назад

thank you for adding insight

@marioneves177 3 года назад

Amazing i will do this project, keep the good work

@DIYMachines 3 года назад

Go for it! Thank you.

@everythingbeautiful2599 3 года назад

Great work and amazing video ❤️

@DIYMachines 3 года назад

Thank you! Cheers!

@mirzaimran7624 3 года назад

Like you you best teacher I whet your next video Your work is very good

@artcamcncsumon7493 2 года назад

--*_-soper bro love you-_*

@valveman12 3 года назад

Very Cool!

@DIYMachines 3 года назад

Thanks @valveman12 :)

@Dycdom 3 года назад

Awesome! Subscribed .

@DIYMachines 3 года назад

Thank you, and thanks again. 😀

@Orionrobots 3 года назад

The mechanism for the Z-axis here could be very useful for my current piwars robot design. I'm also suspecting that lengthening that arm would let me create a bigger movement.

@worldentertainment4069 2 года назад

You're best ticheer

@nyinkercom 3 года назад

Superb work!

@DIYMachines 3 года назад

Glad you think so. Thanks

@singlegame5764 Год назад

Best youtube chanel ❤️

@DIYMachines Год назад

Thanks. 😊

@DarcyWhyte 3 года назад

super fine build

@DIYMachines 3 года назад

Thank you. :)

@WhoIsTheEdman 3 года назад

Instantly subscribed! Where was this channel hiding?

@DIYMachines 3 года назад

Haha, thanks. 😊

@allornothing7957 3 года назад

That is awsome!

@DIYMachines 3 года назад

Glad you think so. :)

@JONYghost 4 года назад

Great job!

@DIYMachines 4 года назад

Thanks!

@dalek-dan-1 3 года назад

Very nicely done video and I like the design of the plotter, others I looked at use one belt with 2 motors but I prefer this way with separate X and Y axis motors as can use my old creality ender 3 board as is to drive it.

@DIYMachines 3 года назад

Thanks. Sounds like a good way to recycle your board as well.