Super Glue and Baking Soda Miracle! Pour Glue on Baking soda and Amaze With Results 

Hello! thanks for your comment. Wish you all the best!

There's no reaction. That smoke is just normal for "super glue" when it's hardening. That's the normal glue curing reaction.

​@@suprememasteroftheuniverse "That smoke" (there is no smoke, no combustion is taking place so no products of combustion are present, it's fumes, as the OP said, from the purely chemical reaction of the curing process) "is just normal for super glue" (which is why the instructions for use tell you to work in a well-ventilated area, like the OP said). "That's the normal glue curing reaction." Quite correct, and perfectly in support of the OP's statement of warning, so why did you start your response with the blatantly incorrect "There's no reaction." It makes the rest of your statement redundant in a daft way: "I can't make up my mind which is correct, the voices are telling me two contradictory facts but they are always true so I believe what they say to me..." Excessive fumes can be quite debilitating for some -- they especially create an acidic reaction to tears, like when you cut onions but worse, and if you breathe them in you can be in a world of pain for a short time. Cyanoacrylate deposition in a fume cabinet is a classic way of lifting evidence off delicate surfaces, for instance, showing how much fumes can be released, and there's even various shots of fumes in this video :-) The OP simply gave a very wise warning _from direct personal experience_ given the abnormal amount of super glue used in these methods, so why go and make yourself look like a fool? I'm sure you're not really...

Thanks for the heads-up! Much appreciated.

i don t wear Mask anymore ! Fuck the COVID !

Super glue can be easily removed from skin using acetone (the same product used to remove nail polish). Of course it should be always handled with care and, if possible, wear protective glasses.

6:10 shows it can be painted.

Hello! thanks for your comment. Wish you all the best!

Pictures? lol

@@nicolaottomano "easily removed from skin using acetone" Acetone is nasty stuff to be putting it on your skin. Regardless, I think the OP was most concerned with the HEAT from the baking soda and glue reaction. Anyway, as many have posted, do this kind of thing in a very well ventilated place AND wear gloves or whatever to protect your skin.

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Those are the two I came to comment on also! I've seen various tricks to tackle a rounded out screw head but never thought to mould a new screwdriver impression on the top -- brilliant! (So long as the screw isn't jammed requiring excessive effort, I doubt this is anywhere near as strong as the original;-)

How the knurled knob comes smoothly out of the spanner remains a mystery.

​@@bangla70s Just prior to fabricating the knob, the OP sprayed the spanner with some kind of lubricant that prevented the glue/baking soda mixture from bonding with the metal (see at 5:30 of the video)

What did he spray the inside of the wrench with?

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Welcome to Creation Holic channel! Thank you so much for your support

Hello. Welcome to my channel. Thank you for your feedback!

Welcome to Creation Holic channel! Thank you so much for your support

Hello! thanks for your recommendation. Wish you all the best!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Yeah, works well for worn nut slots!

Yep, I've done this in the past.

Hello. Thank you so much for your positive feedback! Wishing you health and happiness always!

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hmDhN5z85cg.html

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

どのケースも実際に困った事があるから、どれも関心してしまった。

Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

You are so welcome!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

😅Qd

​😅.o

Hello! thanks for your comment. Wish you all the best!

always store super glue upright....... even the little tube ones

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Nice! I'm curious, how do you use this on a guitar?

@@dannainanif you have a dead or buzzing string from a worn or cracked bone or plastic nut, or need to raise the action, you use it to fill in the slot that the string sits on. Let it harden overnight, and gently use a nail file to shape the nut to match, then carefully file the slot to the height you need. Also it makes a good filler for a quick repair in the binding, wood, inlays, or saddle on an acoustic.

@@dannainandepend on what you need to do.

It’s great for guitar nut and acoustic saddle repair

Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

yes indeed! I believe you have discovered... Papier-mâché! It's a classic modelling material, well worth investigating

Samurai made their armor from this type of material. Laminated paper.

@@stevet8833 I'm afraid you've got that wrong Steve, Samurai armor was in fact constructed of iron plates, joined by cords or leather straps. Papier mache is great stuff, but it's no match for steel swords, spears, or bullets. There's a comprehensive history on Wikipedia...

@@clearwoodcouk Yes, it's probably made of the same material, but I was amazed that it was so much harder and more stable than what I know, which is used in egg cartons, for example. What I got from it would actually have repelled clubs or hammer-like weapons. I can imagine that the samurais experimented with it. 😁

Welcome to Creation Holic channel! Thank you so much for your support

I am sorry to hear that. You might wear glove while using super glue. Have you try using salt water when super glue stick to your finger?

Or sticking the cap onto the tube

Super glue works perfectly on skin. It really should be called skin glue.

@@testodude works perfectly on dry or dryish skin. It's actually slightly soluble in water, so fingers stuck together can be separated by using a blunt instrument such as the handle of a spoon to gradually prise them apart under running water. It's a slow job, typically ten to twenty minutes, but preferable to paying doctor's bills. Even better if available is to use the solvents designed to remove super glue. Fun fact: Police teams attending protests where the protesters have glued their hands to fixed objects now take the solvent with them as a matter of standard operating procedure, reducing the effectiveness of the protest tactic.

Hello. Welcome to my channel. Thank you for your feedback!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

🎂👍

😌

Lisa Douglas…?

Also works for uranium cake

I am reliably informed that this is the secret ingredient in Dwarf Bread, as used on the discworld(R).

Thanks so much for your information

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Welcome to Creation Holic channel! Thank you so much for your support

US healthcare.

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Yeah, and how are the 3rd degree burns doing?

Welcome to my channel! Hope you have a good time while watching the video!

Best application could be remaking head of a rusted Skrew..!!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Hello! thanks for your recommendation. Wish you all the best!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

hello and thank you very much for your recommendation! Wish you the best!

I am using RP7 as lubricant. Wishing you all good things!

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Glad you think so!

Mixture of super glue and baking soda can create a waterproof seal. When combined, super glue (cyanoacrylate adhesive) and baking soda undergo a chemical reaction that results in a durable and hard substance. This mixture can be used for various applications, including filling gaps, repairing items, and creating a waterproof barrier.

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

CA Glue + cotton gets very, very hot

@@dcbdcbdcb I don't think baking soda stays at the same temperature but you are right, it get quite hot, even smoking hot at times but I don't think it will get hot enough to ignite.

hello and thank you very much for your recommendation! Wish you the best!

Wouldn't it be more difficult to apply than bicarbonate of soda?

I've seen this done with steel wool too. Perhaps the combination with baking soda would be stronger still.

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Turns out it wasn’t well-known to me, and I’m no spring chicken. So glad that I stumbled across this video!

Thanks a lot 😍

Hello! Welcome to my channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

Not sure about flour but I have used graphite powder when I needed it to be black.

I tried flour and it didn't work

Ooh, and those wouldn't produce fumes in the same way as baking soda does. Very good info!

Use Decaf grounds, if you’re gluing close to bedtime!

@@TheRationalPi Cocoa powder and wood charcoal can also be used in two part epoxy for repairing bakelite the black or brown versions of it. I restore among other things old vintage tube radios and this method works a treat along with using superglue with cocoa or charcoal.

what about baby powder and tang?

@@testodude As a filler or a drink combination?

Hello! Welcome to Creation Holic channel! I am glad you like this idea. Wishing you health and happiness always!

instant

Superglue sets real fast, that's the amazing part!

@@FLY2KO yeah…! I tried it out with Super Thin CA and holy crap! Less than 5 seconds! And really strong as well! And you don’t need too much baking soda, just enough for the CA glue to mix with and form a goo! It can be levelled off if you’re ready to work it as soon as you add the glue.

A couple of minutes if it has to soak into wood. Otherwise it can sometimes glue the screw into the hole.

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

本当ですね！プラリペアお高いですがこれだと500円位で出来て嬉しい～

Thank you! Cheers!

Hello! welcome to Creation Holic channel. I am very happy to read your comment. Wish you have a nice day!

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thanks for subbing! Wish you the best!

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Glad it helped!

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Hello! Welcome to Creation Holic channel! I am glad you like this idea. Wishing you health and happiness always!

Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Hello! thanks for your comment. Wish you all the best!

Thank you! Cheers!

Thank you! Cheers!

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Hello! thanks for your comment. Wish you all the best!

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "