Super Simple Strawberry System Version 2.0

Подписаться 182 тыс.

Просмотров 156 тыс.

50% 1

Hoocho Shows Us How to Build a Super Simple Strawberry System Version 2.0
Hoochos explores the worlds of Hydroponics, Aquaponics, Permaculture, Homesteading, Fermentation, Technology and DIY Builds to look at the world through a larger lens that can incorporate the best of everything into a rich and rewarding lifestyle.
Through self sufficiency we can reduce consumption and increase our hyperlocal household production.
------------------------------------------------------------------------
STL Files are Available on the Hoocho Patreon:
/ hoocho
------------------------------------------------------------------------
Contributions to the Channel:
www.paypal.me/HelpHoochCreate
------------------------------------------------------------------------
Equipment I Recommend:
------------------------------------------------------------------------
High Quality Combo PH & EC Meter:
HI9813-6 Portable pH / EC /TDS /Temperature Meter-
amzn.to/3ChDrNZ
EC Meters:
Bluelab Truncheon EC Meter-
ebay.us/kGy91u
amzn.to/3ChCYvd
PH Meters:
Bluelab PH Pen:
ebay.us/MMOd3H
amzn.to/3hAZw26
3D Printer:
Creality Ender-3 Pro-
ebay.us/nuKGSK
amzn.to/3ElapP6
Wyze Cams for Plant Time-lapsing:
Wyze Cam V3-
amzn.to/2Xo4xnu
Wyze Cam Outdoor-
amzn.to/3hyz3Cg
Physical Rain Gutter Grow System Ends:
worldgraceproject.org
Float Valves for RGGS:
ebay.us/JFKKyG
amzn.to/396YWEm
Cheap Printer Filament AUS-
ebay.us/5vEbU3
------------------------------------------------------------------------
Grow Light Discount Codes:
------------------------------------------------------------------------
Vipar Spectra Website-
10% discount for the XS1000: yt10Hoocho
5% discount for the XS1500/XS2000/XS4000: ytHoocho
Amazon US: amzn.to/3eY9CYx
Amazon Canada: amzn.to/38udUVe
XS1500 Purchase Link: www.viparspectra.com/?aff=ku6...
8% off Coupon Code: HOOCHO
SpiderFarmer Lights:
epicledgrowlight.com/?ref=ku6...
Apply code HOOCHO for 3% discount.
Mars Hydro Lights:
epicledgrowlight.com/?ref=ku6...
Apply code HOOCHO for 3% discount.
Groplanner Website - 6% off Promo code:HOOCHO618
bit.ly/3plYOs7
US Amazon - 5% off Promo code:HOOCHO618
amzn.to/3iTViE2
FLEX-STAR Website: flex-star.com/
Discount Code: flex.hoocho10
------------------------------------------------------------------------
Merch:
------------------------------------------------------------------------
Teespring: teespring.com/stores/hoochos
The Shirt I Wear: hoochos.creator-spring.com/li...
------------------------------------------------------------------------
Social Media & Contact
------------------------------------------------------------------------
Patreon: / hoocho
Facebook Group: / 734980197112269
Reddit Community: / hoocho
Facebook: / hoochos
Instagram: / hoochos
Business Enquiries: contacthoocho@gmail.com
------------------------------------------------------------------------
If you have personal queries about hydroponics or other matters please join me on Patreon for limited individual support or post in the Hoocho Reddit community or on the Hoocho’s facebook group and there are a lot of friendly helpful likeminded people that may have answers for you.
------------------------------------------------------------------------
Happy Hydroponicing!

Наука

Опубликовано:

17 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@bryanpaynechefbrybry1067 Год назад

Thanks Hoocho. Really love that you show people all your miss adventures (not mistakes). It is very humbling of you.. so many other RU-vidrs would delete that and only show the perfect product.. It has been a very up and down year for you buddy, but you have stuck to your guns and have come at the end a bigger and better man and channel.. Thanks very much for sharing. Have a wonderful Xmas and a even better productive new year..

@rpmland Год назад

Love the chanel Hoocho, from hydroponic systems, nutrients, your LED reviews help a lot since I grow indoors. Thanks again mate, looking forward to what you'll come up with next!

@illfightyounaked6696 3 месяца назад

The best part of this channel is that you show problems in detail and take the audience through the solutions.

@SpartaBobsky Год назад

The first RU-vid channel that provides real value to patreons. Keep going !

@SlfarrowXYZ Год назад

Great video, love watching the process. Thank you for updating the Patreon files. Have a great Holiday!

@barcaisbest10 Год назад

Hoocho the hydroponic mad (good lol) scientist 🙌🏻🙌🏻 I like that you are always trying to make things more efficient… good stuff as always 🔥🔥

@bigonprivacy2708 Год назад

Love the creative approaches and ingenuity. Always appreciate the sharing of lessons learned. Every learns more from the mistakes than the successes! Thank you!

@Scrambles7 Год назад

BIG DOG!! been waiting for this bad boy to come out all week. Wondering what glorious information you have for us this week. Love the work big dog. Keep it coming. Highlight of my week

@dennisshoemaker2789 Год назад

Great setup! Thank you for sharing your adventures with us.

@Eversor-si1kr Год назад

I just want to say that while I haven't had a chance to do much with my own farming yet I really like your videos. They're very good keep it up. Uk here

@batobucket Год назад

Thanks Hoocho! Merry Christmas to you and the dog. I like the progress and everything you are sharing.

@jimmydavidson23 Год назад

Huge thank you for designing for the American system! More please 🍺 ❤❤❤

@aceofspades5786 Год назад

Good work Hoocho, have a great Christmas.

@wayne8113 Год назад

Thanks Hoocho 👍 🎄

@dejanknezevic3693 Год назад

I was thinking on this this morning,how and what to do,and agein you are there for great ideas! Tnx buddy!!!

@johnmcginnis5201 Год назад

For those that may not have a 3d printer, Mike VanDuzee has developed end caps that you make by casting resin in a mold. Only works with american style downspouts. He has a youtube channel.

@brandonlantier Год назад

Its always something aye Mitchell, we create problems to create solutions lol! Love the new setup, Ive been putting off strawberries because of space issues Im on 1/4 acre but I think I have it worked out, Merry Christmas!

@jeffrichards2011 Год назад

Nice Job!

@rdwyer583 Год назад

Just an idea. add a tab on the top of your cap for a self tapping screw to help secure it to the pipe.

@larrylingen8423 Год назад

That hat made you look really cute, I like your videos.... Have a Merry Christmas and a Great New Year....

@davidturner2358 Год назад

Have you considered including screw holes on the sides of the end caps to reduce the chances of blow outs? This would mean the silicon could be used as a gasket instead of as a glue and gasket.

@nickcarracher Год назад

Thanks!

@tonymckessar5734 Год назад

sweet grief things have changed, I was into hydroponics around 18-20 years ago, and man the improvements and varieties of systems available now. For some one in South Oz where do I go for starting over? what to grow, what systems to use.

@richjageman3976 Год назад

Great video, new subscriber!

@TS-kb6lv Год назад

if you get some clear bags you could see it wicking in real time. Great way to demonstrate this awesome design. :)

@tiredofsacred Год назад

good work

@ProjectDIYOz Год назад

Thanks for the video mate, love it. I was wondering, with a future version, could you perhaps add tabs to the side of the end caps that have securing buttons on the same. That way, drilling two small holes to fit the tabs would give you that extra security of it not being able to blow the whole end off.

@gilgalpert Год назад

Gracias por su video

@tombeespoke9384 Год назад

Happy birthday Hoocho, your birthday message went private so I thought I’d message you here. Love your work champion!

@urbanharvestdfw Год назад

ok I gotta try this

@jeremygenslinger4874 Год назад

Just use a couple of stainless steel screws on each end one on either side along with the silicone would stop the ends from popping off like that especially if the silicone doesn't actually adhere to one of the 2 plastics very well but would still seal

Год назад

Thank you very much from France, here aquaponics and hydroponics are still not well known. I will also make an aquaponics system rather a prototype and see later what it will give.)

@davidmoore7303 Год назад

Good thinking 🤔

@FlinFarmer Год назад

silicone and then sheetmetal point screws to hold in place until it dries. Id use shoeglue over silicone. silicone is useless as a plastic glue but screws is a compromise.

@davidw1324 Год назад

Now make a play list with all the videos needed. I think you said 4. Good video,

@MenAreSpeaking 3 месяца назад

Have you considered using rivets to fasten the system? Perhaps caulk, adhesives, or glues can just be there for sealant. A rivet is a convenient way to fasten two surfaces while you only have access to one side. This makes rivets helpful for piping systems where you cannot reach the inside to, say, hold a nut in place for a bolt. Rivets come in alumin(i)um and stainless steel, so it should be rust free either way. I would suggest Alumin(i)um, as a softer metal wouldn't bite into the vinyl as much when riveting. A hand rivet tool is inexpensive, as are the rivets, and is a good hand-grip exercise 🙂

@leannekenyoung Год назад

I found that I wasn’t successful growing strawberries in a couple of experiments using hydroponics. Some they got way too hot and others feet were too wet for too long. I purchased root stalks as well but I didn’t have one success out of 25. Sooo frustrating! I don’t know if the nutrient solution wasn’t strong enough or what the issue was exactly but I wasn’t able to save them despite best efforts. It’s my dream to have strawberries growing inside my apartment one day!! Please advise how you managed with your strawberries from a year ago and how your current setup is working. Just such an expensive undertaking compared to growing the easier plants like lettuce and tatsoi but will also enjoy even more!!! Thanks for all your help in teaching about hydroponics I’m absolutely blown away on all the food I’ve grown from seeds!! I would have never believed possible indoors!! 🥰❤️🙏🏻🇨🇦Happy New Year!!

@katiebell5794 Год назад

Hi Hoocho! I love your videos. They've been very inspiring! It looks like you've created a wonderful paradise for yourself 🙂 I wanted to ask, how often do you drain the nutrient solution for your strawberries, or do you just let it fill through the float valves as it evaporates?

@ronpalmer7260 Год назад

You can put a screw through each side to hold the pressure and then the silicone should keep it sealed just fine.

@wulfheir Год назад

Hoocho, have you modified a 'deck rail planter' for any of your rain gutter systems, seems like they would work well. I've seen your videos but haven't seen you utilize them. They are commonly available in Canada, maybe not in Australia.

@WhyamIstillwatchingyoutube Год назад

Awesome creations. Ill have to give this a go. I can't help wondering about leeching. Plastic's and other such material can and will leech chemical, from its structure, into your soil. I guess we cant really get away from it unless we use wood from a safe source.

@adesign5 Год назад

I grow them wherever, grow like weeds. Struggled in beginning, but now that I have over 10, they produce a lot. Natural compost with natural worms as food

@GCSD Год назад

This looks like a great system. I've done many of your systems before and have had great success. My question about this one is...are strawberries worth it? After many seasons of different varieties of vegetables, I've never had the output of strawberries similar to tomatoes, cucumbers, etc. I know the tastes are amazing, but do you think the juice is worth the squeeze? Maybe this technique will change my mind though, but I'm hoping to hear from others.

@mari-potato Год назад

it's cool

@catamaranman333 Год назад

You should expiriment with polypropylene filament like GF30-PP. it doesnt leak THROUGH the print like PLA.

@katiewood6036 Год назад

Have you tried any of the parthenogenic varieties of cucumbers? Our favorite is Beit Alpha. They don't require pollination to produce fruit.

@alpineflauge909 Год назад

sweet

@bdog5369 Год назад

Anthracnose fruit rot has become quite a problem for commercial setup. This is interesting.

@timd1191 Год назад

Couple of carful screws, would be ideal for those end caps. Great design though.

@angryboba 2 месяца назад

How did it turn out? Do you have a harvesting video for this system?

@paulnguyen4916 4 месяца назад

Is there an update on how this system worked?

@TheDMTLover Год назад

Does your wicks gets congested with roots with time ?? Curious. :-) Good job

@supplies4reptiles228 Год назад

does this work better than the dripline inserted in the bags? which one is more cost effective and lastly i saw some videos with bags and drip irrigation lines placed right next to the plant in the bag.. end of bags are placed to return excess water back..

@user-sm2pu7jv3p 10 месяцев назад

hi Hoocho, if big raining day, outdoor hydroponic system will flood?

@neal0071234able 14 дней назад

The black soil bags.. How many inches of soil is that

@13kulig Год назад

Can you tell me what brand of nutrients you are using?

@espjason Год назад

Hi is the glue and plastic food safe

@John-gm8ty Год назад

what is the wicking material you use in this system?

@adam-og9gd Год назад

Where can you buy the end caps?

@albertt2686 Год назад

👍

@jesusHernandez-kp5mc Год назад

what is the size of the holes?

@parkypeteattarzalihoney6536 Год назад

Hi Love your videos Where do you gat the wick plugs from

@Hoocho Год назад

They’re 3D printable designs available on my patreon

@tannenbaumgirl3100 Год назад

Where can I buy those Rock Wedges for wicking? Buy from you? Or do you know a source in the US?

@skylinevspec000 Год назад

5 walls has been my solution. its thiccccc but works, minimum of 3 walls. default is 2 I think..

@prudhvikumarsangani3612 Месяц назад

How much yield did u got ?

@reshardbelilam4269 Год назад

What type of 3D printer you used

@jamess1787 Год назад

1:33 Domesticated dingo!

@reshardbelilam4269 Год назад

You air rate the nutrients

@jonathansukanto3052 7 месяцев назад

how to make like this 8:09 thank you

@robertcline7603 Год назад

Quick question is any one in this community concerned about the phenols and phalates found in these types of gutter systems or is this just a distinctly American concern?

@danielhoward5779 Год назад

The only square pipe I can find locally is 63mm x 63mm

@ricardo-iw9sq Год назад

You must be in the UK like me and have struggled with finding the rectangular style pipe, the simplest I've found but not built yet would be to use 110mm diameter pipe as you can buy it anywhere and the same with fittings, you can get 4" post covers that are for decking but the cost isn't feasible. The other way is to make a wooden open top box and line it with ground sheet plastic.

@spocksvulcanbrain Год назад

How many dollars/strawberry did that cost?

@bentheguru4986 Год назад

Try using Urethane rather than Silicone's that have way too many variants that wont always work on plastics. Urethane is strong and sticks like s##t on a blanket.