Тёмный

SUSPENSION TECH: S550 Mustang Rear Suspension Components from BMR 

Lethal Performance
Подписаться 24 тыс.
Просмотров 11 тыс.
50% 1

Almost daily here at Lethal Performance we are asked what the best & most important components are to upgrade in the rear suspension for the 2015+ S550 Mustangs. What good is horsepower if you can't put it to the ground?
Jared took a trip over to BMR Suspension in Seffner, FL with our 2018 Mustang GT (aka Project Goldmember) to get the “Kelly Aiken” treatment. While there, we were able to pick Kelly's brain on the IRS and it's components. He has a surplus on knowledge on these cars from not only his own car (even planting GoPros underneath to monitor the suspension's activity) but also from the vast amount of fast cars using BMR Suspension, including 2 of the fastest IRS cars in the country.
Based on his experience, we asked him to pick out what he felt were the most beneficial components for these cars, the “Bread & Butter” as he calls it. They are:
CB005 - Cradle Bushing Lockout Kit
BK081 - Spherical Lower Control Arm Bearing
BK051 - Differential Bushing Lockout Kit
LP-550179 - Extreme Differential Bushing Hardware Upgrade Kit
TR005 - Double Adjustable Rear Toe Rods
TCA048 - Vertical Links
You can purchase the complete "Bread & Butter" package here:
www.lethalperf...
Check out the video to listen to Kelly drop some S550 suspension knowledge bombs then head on over to www.lethalperformance.com to pick up your new suspension pieces!
#teamlethal
lethalperformance.com
877-2-LETHAL

Опубликовано:

 

27 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 19   
@absgt40
@absgt40 6 лет назад
Excellent information! Kelly is always great help. I have most of these pieces, or variations there of, on my car.
@RidinONChrome
@RidinONChrome 5 лет назад
Good informative video. Especially liked the part about the diff movement under load. I think I've experienced that when going WOT and at the 1-2 shifts. The rear of the car will jerk.
@TheCzechmate007
@TheCzechmate007 Год назад
Holly smoke, excellent info! The reason I am watching these vids is that my 2021 S550 GT started pulling to the left under heavy acceleration. Everything is stock on my car. I suspect those diff bushings. Any ideas?
@Lethalcamp
@Lethalcamp Год назад
Thank you! It's tough to say what's causing the pull to one side as it could be unrelated to one specific suspension piece. A bad alignment or something else can be causing it. With that said you will indeed greatly benefit from an upgraded suspension package from either BMR or Steeda. Feel free to give us a shout and we'll be glad to assist you.
@MustangGuru
@MustangGuru 11 месяцев назад
Bolts breaking in the diff bushing inserts, even the upgraded bolt kit for them are breaking as well. Any fixes?
@NotoriousG337
@NotoriousG337 5 лет назад
I am currently full Bolt on with stock suspension. Traction is a huge issue for me. Do you think that a good set of tires matched with this kit will make the car hook 10x better?
@Lethalcamp
@Lethalcamp 5 лет назад
Austin Abshire definitely. Tires and suspension make a huge difference. That bread and Butter package is 👌 Add some BMR performance or drag springs into the mix and top it off with some Viking shocks for a stellar setup. Let us know if you have any other questions.
@trentgareth240
@trentgareth240 6 лет назад
Thanks Kelly and Jared. One question: If the complete "Bread and Butter" Package were installed on a '15 to '18 Mustang GT, would it help keep the stock halfshafts from breaking under hard launches on slicks?
@Lethalcamp
@Lethalcamp 6 лет назад
trent Gareth indeed it will. Less wheel hop = less stress on the driveline and axles. That’s one of the causes of snapper halfshafts. Let us know if you have any other questions.
@MustangGuru
@MustangGuru 11 месяцев назад
I have the bread and butter per say on my 15 Roush rs3. And have broke a driver side Ford racing half shaft leanth wise along the splines in the outer CV You may get away with it on an Automatic car but not a manual.
@josephsonntag1354
@josephsonntag1354 5 лет назад
I added many of these parts as well as some from another company and I can attest that the car is a completely different car in terms of handling and feel.
@kevingomez8735
@kevingomez8735 2 года назад
What components would you recommend for a guy like me, that just wants the best handling for the street… not driving like a maniac..
@Lethalcamp
@Lethalcamp 2 года назад
We just released a whole line up of Suspension Kits with BMR, designed specifically around Handling! Check them out in the link here : www.lethalperformance.com/search/?q=LPS550grip
@smokeum12
@smokeum12 6 лет назад
I am going to be putting the Ford performance track handling package on my wife's 17 auto car..it is all motor and will stay that way. it is her daily. It will see just as much drag racing as it does an occasion track day. Nothing serious. Would this kit work well with the Ford suspension kit or would the lower end kit be better? Thank you
@drealraj
@drealraj 6 лет назад
So the whole rear set up is shot? If you have to change everything just for it to be good enough
@Lethalcamp
@Lethalcamp 6 лет назад
I wouldn't go as far to say that it's shot but with any OEM suspension setup it can definitely be improved. Especially if you're adding lots of power with the goals of going quick.
@blackonefifty
@blackonefifty 6 лет назад
Keion Rajcoomar perspective. the lethal performance 18 just put down 900+ wheel TODAY. you think the stock rear suspension is built to handle that? or even 700 wheel?
@DaRealSonic
@DaRealSonic 2 года назад
Perfect bro. Subscribed
@rfueiodafiodas
@rfueiodafiodas 5 лет назад
Bitcoin is up. XRP is up. Pump it Jared.
Далее
FATAL CHASE 😳 😳
00:19
Просмотров 511 тыс.
Brilliant Budget-Friendly Tips for Car Painting!
00:28
Avaz Oxun - Yangisidan bor
14:29
Просмотров 429 тыс.
Whipple Supercharged Mustang GT 6 month update...
13:02
FATAL CHASE 😳 😳
00:19
Просмотров 511 тыс.