Thank you for sharing your videos with us. I just setup my Little Rebel with your help you made it much easier. Can you share what needle you used with your machine for quilting?
@@busybeescraftycorner6146 the needle I use is based mostly on the thread. The needle - thread pairing that I start with is in the Little Rebel manual, CHOOSING YOUR NEEDLE in the APPENDIX, and I adjust based on my experiences. If thread is shredding, I generally go up a needle size.
I try to film a lot of what I am working on. But to be honest I don't want to tire people out with useless content. If I can't create something useful from my video taping...I won't post it.
@@quiltingonathread thank you and I totally understand. I just picked my little rebel up on Friday. If I have any thing I think of I'll let you know. Thank you for your kindness
@@marveledwards4848 I'm using 40 wt thread and the size 16 MR needles that came with the Little Rebel. The machine comes with needle packs in 4 sizes (12, 14, 16, and 18). You should have needles in this assortment to work with whatever weight it tread you choose.
From my measurements you can get 10" VQS. Needle drop to needle drop is 11", but you wouldn't want to count on every last thread of space being quiltable
Could you please do a video where you show just how to hoop the quilt on the original Cutie frame to make sure the fabric comes in contact with the sensor on the Little Rebel? The manual says not to hoop the quilt too tight.
I'm so sorry for not seeing your question earlier... I normally try to respond within a day. I have a video already created that goes through proper hooping and this should be a good guide for either the Cutie or the Cutie Breeze. Proper hooping is neither too loose or too tight and works perfectly with my Little Rebel on the Cutie Breeze. Here is the link to the video I've mentioned ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TK0uD9a2anA.htmlsi=tHxxZQvzdb69Pldu
When adjusting the height of the hopping foot before starting to quilt, doesn't the piece of fabric add thickness under the hopping foot height tool, and does that throw things off? Thank you for showing how to do this set up. It's helpful.
Hi Bonnie, I love the name Scarlett for your machine. You have been a big help to me and I'm ready to name my machine. Can you tell me where you got your name sticker from?
