No video :(

Swordfish / Arduplane - Chasing Perfect

Подписаться 16 тыс.

Просмотров 2,1 тыс.

50% 1

Finally getting it "perfectly" tuned...
Atomrc Swordfish bit.ly/3JPibp8 (Use code "BONAFIDEPIRATE" for $10 off!)
Walksnail - bit.ly/walksna...
Hammer Antennas - amzn.to/3mxqOMu
__
Patreon: / bonafidepirate
Huge thanks to my current Patrons:
Werner B.
Douglas M.
tripplewhopper
Robin B.
Lauren R.
David H.
Kevin W.
Josh Z.
A.J. S.
Silvio F.
nadieselgirl
Reindale H.
Henning K.
Adi
Clay Q.
Time Chaser
Julian B.
Sean M.
LAFlyer1
ctx fpv
Craig B.
Peter W.
Steve R.
Jim K.
Caroline T.
MidgeFPV
Mark W.
Brayton T.
Roberto E.
Channel Members:
Doug McPheters
100SteveB
Spartan 329
Todd Loomis
Silvio Franco
Werner Berry
jdmkramer
Martin keilloh
Stephen Thorpe
Vernon Silvers
burrefpv
Ken Payne
Join this channel to get access to perks:
/ @bonafidepirate
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood - bit.ly/2EAo4XZ
eBay - ebay.to/2r7k3mb
Amazon - amzn.to/2AptzV2
Foxeer - www.foxeer.com/...
Caddx - bit.ly/CaddxBFP
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps! paypal.me/keith...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@mark9328 Год назад

You have that thing really dialed in now! Nice work Keith!

@bonafidepirate Год назад

Thanks Mark, I'm quite happy with the way it's flying now. I was fine with it before, it was "good enough", but once you go down the rabbit hole looking for the perfect setup it gets kinda fun and challenging at the same time... lol I think it's flying the best right now that is has so far. It might even get a tiny bit better once I tighten up the navl1 stuff that I'd backed off to try to deal with the problem before I knew what it was... ha

@North49RC Год назад

I haven't built a Vtail before but your trim tip is something that I will use in the set up of my Swordfish. Makes total sense, thank you.

@MCsCreations Год назад

Fantastic flying and tuning, Keith! 😃 It's flying rock solid! Stay safe there with your family! 🖖😊

@AerialWaviator Год назад

I would have assumed that yaw (rudder) was trimmed too as part of auto-trim, particularly for a V-tail. Learned something! Great walk-thru detailing over flights leading up to the root cause explanation.

@bonafidepirate Год назад

Yeah the V-tail sort of complicates things... lol I still stand by what I said earlier, they have some benefits, work well when set up properly, but can be a pain to get them set up properly. :D Apparently the rudder isn't trimmed with auto-trim on a conventional tail either. It only trims for level pitch and roll, using surfaces assigned to control pitch and roll. ardupilot.org/plane/docs/auto-trim.html I had never really noticed that before since my other planes either have no yaw control, or have worked with the rudder trim at 0... lol It's definitely something to consider when setting up a new plane and getting it all dialed in though, something to check.

@janilamminen5320 Год назад

Dear Keith, I’m tempted to move from iNav to Arduplane with my Swordfish. I have never used Arduplane, but done some research. Can you make a straight drop down for the parameters of Swordfish you have your best tune on? And also some sort of guide to use Arduplene (ie. On first flight you must tune in servos, airspeed sensor is calibrated in following way..)? I know, by reading Arduplane documentary you can do it, but you make all so clearly explained. Only difference on our Swordfishes are that I have DJI O3 and airspeed sensor. Thank you for your contribution to this hobby!

@austntexan Год назад

Your commentary is so helpful Keith. Great flight. I always learn something on this channel. Good stuff.

@bonafidepirate Год назад

I try to learn something myself every time I fly, and share what I learn... lol For me that's one of the best parts of this hobby, there's always something new to learn and even just brush up on old skills.

@reinhardherden516 Год назад

Would you upload your parameter file so that people can compare your tuning on the Swordfish with their own parameters?

@theflyingsandalrc Год назад

Thats interesting, ill have to check the rudder trim on mine as well... ;)

@EnglishTurbines Год назад

I'd like to bet this model won't turn using just Rudder when in Manual? I seem to recall Mr Newton pointing this out some time ago....😳🤔🇬🇧

@bonafidepirate Год назад

I actually found the yaw control more responsive than I'd expected. In manual mode it does seem like there's a little bit of pitch coupling with yaw input, it tends to push the nose down a little with a lot of yaw input either direction. It's not really noticeable in stabilized modes though. To correct that in manual I think you'd either have to do some clever mixing, or set up some mechanical differential throw in the linkages. It's not a big enough problem for me to care about that much though... lol

@shanesdiy Год назад

Great bit of investigative work finding that trim issue. Got me wondering if "Instant Trim" on my TX16S includes rudder, just confirmed it does. Do you think Arduplane didn't include yaw/rudder trim since it was a v-tail or does it also not trim yaw on a normal tail?

@teksingh4362 28 дней назад

what batteries you use and what flight time you get with it ?

@horsship Год назад

When you updated the new firmware for arduplane, did you have trouble arming the board?

@bonafidepirate Год назад

No everything works normally. If AP isn't arming it should give you a reason why, check the messages either on screen or in Mission Planner. Here's a list of reasons it will refuse to arm: ardupilot.org/plane/docs/arming-your-plane.html#diagnosing-failure-to-arm

@horsship Год назад

It says radio Failsafe in messages. I have no signal in the flight controller. Don’t know why though, I did not change anything when upgrading the new ArduPlane firmware so I could go from analog to the walksnail hd. As you can see I’m not program literate. Lol.

@bonafidepirate Год назад

@@horsship Updating the firmware *shouldn't* break anything, Ardupilot is really good about not changing settings between firmware versions. Double check your serial port setup and everything related to RC input. If you have a backup of your parameters and would like to send me that and some details about your physical setup, I wouldn't mind helping you go over it to look for anything out of place.

@horsship Год назад

Thanks! I finally figured it out tonight. I checked the back of my crossfire transmitter and changed it from crossfire transmit/receive to Sbus and it worked. I always had it on crossfire transmit and receive and it worked before. Don’t know what happened but changing it to Sbus and it worked. Now to go fly. Thanks for the support!

@mauror79 Год назад

What prop and KV motor use ?

@bonafidepirate Год назад

It's the stock motors that came with the PNP/RTH version, I'd have to look again to see what they are. Props are 6x4.5

@mauror79 Год назад

@@bonafidepirate thx ! 6x4.5 hq / gemflash ?

@bonafidepirate Год назад

@@mauror79 Just checked the motors, they are 2306 size 1700kv. The black props are some "old style" Gemfan clones, something I had in my parts box for years. I've also ran some Gemfan Flash 6042s that are equally as efficient, but I like the black ones because they have slightly less vibrations.

@mauror79 Год назад

@@bonafidepirate my swordfish came with 1700kv motors, now I am using the original propellers, but I want to also try the K2 from Hq, they are 6x4, I think it will be a short step but I will wait until there is no wind to draw conclusions. I want to be more efficient and I can't do it yet.