Thanks for watching. We like them they are a good tire. Most people that ride around us dont like them because they slick over some. But we have run them in the past and they worked really good.
Only tire I want is the one you didn't mention but stod next to it and put your elbow on it at the end of your video. Can you give me information on it please. Thanks Michael
Thanks for watching. system3offroad.com/xcr350 us this link to see more on this tire you asked about. It is a System 3 XCR 350. It is a good tire for hard pack and rock. It does not like mud but it does excellent in the other environments.
It be nice if they made that black water in a 14” or 15” on there 34” tire. I had the itp 34” tires, and they were good and very light. 39lbs a piece, but sadly they came in a 17” wheel, and I don’t think there is beadlocks in that size for utv bolt pattern. They may have even discontinued the old 34s. I’m not sure.
looks like a set of the rock a billy in the last part of this vid..any info on these tires...also have yall ran any of the Frontline BDC tires ...good looking tires would love to hear about these two tires..
Thanks for watching. The Rock-A-Billy tire is a good tire. It grips more than you would think with the pattern it has and size of lugs. It also wears really well so you can get a lot of miles out of a set. The Frontline tires we have not tried out yet. Also a tire that we like even more than the Rock-a-billy is a Trail saw tire. It is made by the same company and it looks good and performs even better. Might check it out.
What Machine. If it is a 64 inch wide. I would go with a 5-2 offset. Raceline or Sedona wheel. With a 32-10-14 Carnivore or XTR 370. Those are great tires. If 72 inches wide. get a 6-1 offset wheel and run the same tire.
We have had people run them and like the OK. But they are not overly impressed with it. They say it is a tire that dont like to clean out good. But we have not run them so we cant say for sure.
I’m wanting to switch out my stock big horns 2.0 for the bfg’s. Will I have a big power loss or start smoking belts because of the weight difference between these 2 tires ? I don’t want to have to mess around with my clutching on my 2021 can am x3 turbo r. And advice is appreciated
Thanks for watching. We have done a lot of bigger tires swaps on Maverick X3's and for the most part we do not clutch them. We just use Low gear more often as to not slip the belt. Power loss will be there a little as it just happens with larger tires.
I am waiting on a 21 Ranger 1000xp Ultimate that we ordered. Live in the upper midwest & I am thinking of going with a System 3 XCR350 in a 30x10x14. Asking cause I was hoping you were gonna talk about them at the end, but, you just leaned on it a bit & the video ended there...lol Curious to know what your opinion on those are?
Thanks for watching. The XCR350 is a good tire. That tire does good on the road and gravel, it wears good and grip will in most all terrain. The tire will go through deep mud but it will need wheel speed to keep the tire treads cleaned out. But we do sell the XCR350 well and never get any complaints. You will like them where your at.
I have a 2021 krx1000...if that will help a lot on you Answering me on best long lasting tires for me ....running a lot on asphalt.. Mud and dirt... More asphalt than anything.
I am wondering about a great tire for the X3 XRS Max RRS and want to go to 35” in a 15” wheel but am worried about performance loss.This came with the wider wheel in rear and 30” bighorns on 14” bead lock wheels
Thanks for watching. If you have a Max and run a 35 inch tire it will hurt the performance on it alot. I would go with the 15 inch rim and put a XTR370 in a 33-10-15 on it. That away you have a big tire but will still keep some of the performance of the motor.
Thanks for watching. We have not had a Commander XMR yet, but we have had the XTP Commander and we have been putting 32 inch tires on them with no issues. I would say with confidence that 32 inch tire will work.
I'm making my 2014 Maverick XRS street legal so I can run around my little town. I want to buy a second set of tires to run on asphalt, what tire do you recommend for the street ? I'm not about to ruin my trail tires on asphalt.
Can you tell me what is the best trie to buy to run on asphalt i do a lot of riding on asphalt....but i do riding in mud and dirt also so can you tell me the best tire that will last longer for my riding
Thanks for watching. If your on the east coast riding I would look at the Carnivore tire in size 33 inch. Also we just got a Roctane T4 in stock and it looks great as well. They make it in a 33 inch tire for 15 inch rim. We think this new tire will be a great option for east coast riding.
Thanks for watching. We have some on order but they have not showed up yet. We will have some one in our riding group run them once we get our hands on a set. They look like they will be a good tire for sure.
I have a 2022 Can Am maverick sport xxc 1000r and I've already had a flat in the stock Maxxis bighorn 2.0. That's 3 straight years with flats in Maxxis tires. Running 14 psi and usually on rocky/dirt trails. Old rail bed. Anyway I'm looking to change the tires to 30x10x14 and I want to stay away from having to do any clutch work. I ride a bit of pavement also. Unfortunately. Obviously looking for more toughness. I'm looking at rock a billys and m1 evils and a few other's but what do you suggest? I live in 🇨🇦 so $300 a tire is low. Also there's a Canadian UTV tire called Traxion Alpha. Have you heard anything about them? Thanks for your time.
Thanks for watching. The Rockabilly is a better tire in my opinion than the M1 tires. The Rockabilly tire will wear really good and work great where your riding at.
I know you've got this question alot but I'm lookin at 30s and 32s carnivore or xtr370 for a talon 1000r what do you think about the sizes and the models thanks
Thanks for watching. If that was my machine I would go with the 32-10-15 Carnivores and they will work out great for you. The XTR370 on that machine will hurt the power and sporty feel of it for sure.
For Windrock and the TWRA area we have been basically running 3 tires there with really good success. 1 ins 32-10-15 Carnivores the next is 34-10-15 Super ATV Warriors and the last is 33-9.5-15 Roctane X2. These three tires we have run or have guys riding with us a lot and have had great luck and good traction with these tires in that area of TN.
@@JayGood73 I'm running the that setup on my base model x3 64 inch and its amazing especially in West Virginia and around rocks can't beat the carnivore imo 😎
Thanks for watching. If you stay in the woods and dont ride much pavement I would go with the Carnivore. But if you ride on pavement a lot then I would look at a the XTR370 as they will wear better on blacktop than the Carnivores.
Thanks for watching. I would do the 32-10-14 or 32-10-15 Carnivore or Roxxzilla. Both of those tires and size in 32 inch tall you will not need any clutching work done.
Thanks for watching. I would go with a 4-3 offset rim. Get the stance a little wider for the stability. Tires I like the XTR 370 or do a Carnivore in a 30 inch.
@@AdrenalineCyclesKy will these fit on a Maverick sport with 6+1 offset without rubbing? I am really interested in the system 370s. How do you compare them to the carnivores?
@@AdrenalineCyclesKy i have a xmr turbo RR and stock are 30"s. Is going to a 32" gonna cause any issue with the sxs? I keep hearing people say you need to upgrade clutching if going to a larger tire?
Thanks for watching. Right now all we have is a set of Pro Armor Pro Runners. We sold out of the 33-15" XTR370. We usually have a bunch of them but they have sold out and are on back order.
That is a good tire. It is better in the 30-32 size the larger 35 inch tire is harder to get it to clean the lugs out. But it is a popular tire for sure.
Thanks for watching. We have been running the System3 XTR370 in 32 inch and 33inch tire size. I just put the 35 inch tires on my Max X3 and they grip. Ride good got deep treads and do well. I think you would like them if your liking the Roctane.
Thanks for watching. If your running a machine that can spin the tires up really good then they will both perform about the same. Only if you have a machine around a 100hp I would say the carnivore has the advantage.
@@AdrenalineCyclesKy They will be going on a Mule Pro FXT...around 46 HP I think...tire size gonna be 28×10x14...you recommend the Rampage or another tire. I live in Western NC. Drive some on roads and trails
Bit late to the show, but what tire do you recommend on a 2021 rzr turbo (64”) will be driven 99% on eastern ky and Hatfield McCoy trails. Was looking at carnivores but open to anything
Thanks for watching. Yeah the carnivore is a good tire option and another tire is the XTR370 from System3 is built like a carnivores but is a lot more durable and will last longer that a Carnivore. Check that tire out.
@@AdrenalineCyclesKy thank you for the timely response, in order to throw on 30 or 32” carnivores would I need a new set of rims or could I use stock rims? I know my current are 29” big horns 29x9r14 and 29x11r14. Research online says I’ll need new rims but everything contradicts that I’ve read. I guess my question is could I go with 30 or 32s and not upgrade anything or would I need to upgrade a lot. I plan a clutch kit, belt, axles, and tune soon
@@AdrenalineCyclesKy to touch up slightly more on my question, I believe the front tires are skinnier stock but all 4 rims are 14x7 meaning If I have 9 wide and 11 wide to begin with I could square it all off at 10 wide on stock rims fine?