TA-0305: Rapco 1804p9 vs BG7TBL GPSDO a 2nd look

Подписаться 12 тыс.

Просмотров 3,1 тыс.

50% 1

Again the two side by side.
Many thanks to Steve G8XGG from XGGcomms.com for donating the Rapco.
Digimode adapters from Steve: www.XGGcomms.com
Related Videos:
TA-0302 Rapco 1804p9: • TA-0302: Rapco 1804 P...
#027 BG7TBL GPSDO: • #027 BG7TBL GPSDO and ...
#184 BG7TBL FA-3: • #184 BG7TBL FA-3 and W...
#190 GPSDO Extra satelites: • #190 GPSDO BG7TBL - FR...
Related items:
GPSDO_Display go.tonyalbus.com/GPSDO_Ali
GPSDO_NoDisp go.tonyalbus.com/GPSDO_Ali2
GPSDO_NoDisp go.tonyalbus.com/GPSDOnd_amz
GNNSDO go.tonyalbus.com/GNSSDO_Ali
Distributer10 go.tonyalbus.com/Dist10_Ali
Distributer0-200 MHz go.tonyalbus.com/Dist200_Ali
FDIS-5 go.tonyalbus.com/FDIS5_Ali
FOS-3 Std go.tonyalbus.com/FOS3
RG316 Cable BNC-BNC go.tonyalbus.com/316BB_A
RG316 Cable BNC-BNC go.tonyalbus.com/316BB_B
RG316 Cable SMA-BNC go.tonyalbus.com/316sb_A
RG316 Cable SMA-BNC go.tonyalbus.com/316sb_B
10M-6PLL go.tonyalbus.com/10M6PLL_Ali
10 MHz BPF go.tonyalbus.com/BP10_Ali
WB-SG1 go.tonyalbus.com/WBSG1
WB-SG2 go.tonyalbus.com/WBSG2
FA-2 go.tonyalbus.com/FA2_Ali
FA-2 go.tonyalbus.com/FA2_BG
FA-2 Plus go.tonyalbus.com/FA2Pl_Ali
FA-3 go.tonyalbus.com/FA3_Ali
TTL2USB go.tonyalbus.com/TTL2USB
#RAPCO #GPSDO #1804

Наука

Опубликовано:

20 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@bobwhite137 Год назад

Just as an FYI, if it took 22 minutes for one cycle to "cross" (in the video, you showed 11 minutes for what appeared to be 1/2 cycle shift) - that would equate to roughly a time accuracy of 1 second in 418 years. Not bad!

@TonyAlbus Год назад

Thanks! that is great to know... good i did it on 10 MHz and not 1PPS... would have become a long timelaps :)

@user-zy9ul8bh9t 6 месяцев назад

6:00 синхронизация, фазовый сдвиг!☕🙋

@TonyAlbus 6 месяцев назад

Oh.. i am not i timenut, not sure what that is.

@M5AXA Год назад

Nice one Tony. Precise and informative as ever. The Rapco looks great across the top of those draw cabinets.

@TonyAlbus Год назад

Thank you Ian! The Rapco feels at home here.. even the colors match :)

@ivolol Год назад

I've also heard you can get timing GPS chips if you are building these sorts of things for labs, they don't care so much about position at all, all they care about is getting spot on timing errors to a minimum. I think for this, they assume that whatever position they are in currently, it is fixed (your equipment is staying in the same place on Earth) so it can start improving relative accuracy deviations in the timing calculation from there. Whereas a regular GPS chip, a smaller timing error is cross-correlated to how well it can calculate an accurate position, but it doesn't ever assume it is stationary, so it has one less constraining variable it can use to narrow down error.

@TonyAlbus Год назад

Thanks Matt, interesting point indeed.

@Flamenawer 5 месяцев назад

The thing to improve is a M8T, LEA or NEO, as they are focused in that. You can use NEO-M8T and it will be compatible and transparent with the M8N of any gpsdo use one . LEA m8T is not pin compatible, but it is even better for these tasks, usually is communication towers etc

@sbelectronicaindustrial6652 Год назад

Hello, what a good frequency meter ... Greetings Tony

@TonyAlbus Год назад

Thanks, yes love the FA-3 for these kind of jobs.

@germibestia Год назад

Hi Tony, thanks for the interesting videos. I have gotten myself one of the BG7TBL GPS receiver, the FA-3 frequency counter and the 10 MHz distribution amplifier and I have a question: On bot the GPS receiver and frequency counter we see a display telling us the frequency with great precision. But How can we be sure about the accuracy of those readings? If we use the GPS signal as reference, the frequency counter assumes it is perfectly 10 MHz, so what if it's slightly out? It gives us readings down to the 0,1 micro Hz!!! And the frequency counter of the GPS receiver itself, how can we be sure it is accurate to the 0,1 mHz?

@TonyAlbus Год назад

The display shows the current setting of the TCXO compared to the GPS time (atomic clock) so if it is a bit off, is will try to compensate.

@germibestia Год назад

@@TonyAlbus thanks for the answer. Are the exits of the distribution amplifier 50 Ohm or high impedance?

@TonyAlbus Год назад

@@germibestia Hi, they are 50 Ohm

@sammin5764 Год назад

🌟🌷🌟

@TonyAlbus Год назад

Thank you!

@M-P-X Год назад

Volgens mij kunnen de modernere GPS ontvangers zoals de NEO 8 toch wel minimaal 66 kanalen aan?

@TonyAlbus Год назад

Ik heb het niet kunnen vinden, ik zal verdermoeten zoeken, maar 25 doen ze dus in ieder geval.

@zdzisiek1979 Год назад

👍🙂

@barrybogart5436 Год назад

I just wondered if that Kenwood TH-D7 still works. Mine does. Even the batteries.

@TonyAlbus Год назад

Hi Barry... TH-D72 .. yes is does.. video from last May. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-abdf7KbrtAo.html Great yours works too.

@barrybogart5436 Год назад

@@TonyAlbus Yes, I just found your #283. But it would be really nice if there was a mod to allow WIRELESS connection from the D7 and a GPS. I already have a Bluetooth GPS, so how hard would it be to add BT to the D7 somehow? 73

@TonyAlbus Год назад

@@barrybogart5436 If you can find a serial to BT adapter, you should be able to do so right? only thing is, modern GPS do 9600bd , i am not sure, but the older Kenwoods usualy expect 4800bd .. that is to look out for..

@barrybogart5436 Год назад

@@TonyAlbus Hams are clever - I bet someone has done it. Years ago.