TA-0364: Daiwa CN-801 HP SWR PWR Meter - Repair Verify and Cleanup

Подписаться 13 тыс.

Просмотров 5 тыс.

50% 1

Repair of a reliable Daiwa SWR PWR meter.
Related videos:
Daiwa CN-101LL • #298 Daiwa CN-101L SWR...
Daiwa CN-6xx serie: • TA-0323: SWR - Dummy l...
Sierra Philco 401A-500L Dummy: • #294 Sierra Philco 401...
Mini SWR/PWR: • TA-0307: Mini 100 Watt...
ATU 100Watt: • #296 ATU-100 EXT 1.8-5...
Related items:
50_Ohms-BNC go.tonyalbus.c...
Attenuators go.tonyalbus.c...
50 Ohm 100Watt go.tonyalbus.c...
50 Ohm 250Watt go.tonyalbus.c...
50 Ohm 100WN go.tonyalbus.c...
MFJ300 Watt go.tonyalbus.c...
LKK200Watt go.tonyalbus.c...
RG316 Cable only go.tonyalbus.c...
SMA(m)-SMA(f) cable go.tonyalbus.c...
SMA(m)-SMA(m) Cable go.tonyalbus.c...
SMA-DVB-TV go.tonyalbus.c...
SMA-F go.tonyalbus.c...
SMA-all go.tonyalbus.c...
SMA-all go.tonyalbus.c...
#DAIWA #CN801 #CN801HP

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@davidv1289 Год назад

Always satisfying to see a piece of equipment repaired and put back in service. Great addition to your collection, Tony. Thank you for sharing it with us. Regards, David

@TonyAlbus Год назад

Thank you David, yes great addition!

@jwrtiger Год назад

Thanks Tony for the nice video on the Daiwa. I also have the CN-801 HP and CN-801 V and have had no real problems with them for well over 10 years. The manual is available on several online sites as well as a schematic diagram for the CN-801 HP. There is actually an LM358 dual single supply operation amplifier in the PEP section and the PEP mode needs the external DC source connected to the meter. I just checked my unit and the bottom meter lights looks to be cool white if you want it to look factory and replace the blue lights. If you need any of the manuals or a picture of the lighted meter just let me know and I will send them to you. Glad you were able to fix the Power/SWR meter.

@TonyAlbus Год назад

Thank you John.. it seems almost if each model had the color lights of its logo .. so the V version Orange logo has Orange light and the HP version en blue. i have seen now more HP versions with Blue lights. And thanks you for your offer, i keep that in mind.!

@MM0IMC 6 месяцев назад

I've got the modern Daiwa CN-901HP3 meter and the slightly yellow background of the face, when the LED light is turned off is nice. Occasionally, I forget to set the correct power range on the meter and the needle hits the end scale. I don't believe that I have damaged the meter. Any thoughts?🤔

@TonyAlbus 6 месяцев назад

Hi, don't do that to often, it can never be very good :) a good practice is to start always o the highest range and than go down the ranges.

@WPGinterceptor460Interceptor 7 месяцев назад

What do you use to power this meter? how many amps? or do you just connect it directly to your 13.8 v power supply

@TonyAlbus 7 месяцев назад

Yes i power it with 12 or 13.8 is uses very little like its only for the backlight and the SSB circuit if you want to see peak

@mostlypostie1 Год назад

Great work! Did you see any difference in the PEP readings with the DC power connected and disconnected? Also, did the blue lamp need to be switched ON for the PEP power reading to work correctly?

@TonyAlbus Год назад

As i understand the PEP circuit need power becouse of the OPAMP in the circuit. the light does not add anything than light. i forgot if it was switchable. later i compair the 801 and 901... then i have a look at the light switches. Thanks for your comment

@adamwhite3584 10 месяцев назад

These are active peak reading meters. The only kind there is as far as "PEP" is concerned

@jeffneely1990 6 месяцев назад

Which ones are for peak

@TonyAlbus 6 месяцев назад

The PEP switch is for peak. so if i remember correct. the CN-801 and CN-901 have that. but you can check the specs on google to be sure.

@uni-byte Год назад

Nice job. Tony, is you wife aware your equipment is so .. extensive? (There is a double entendre in there)

@TonyAlbus Год назад

She is scared to go up the little ladder to the lab, so if you don't tell her, i will be fine :)

@t1d100 Год назад

Bravo

@TonyAlbus Год назад

Thanks!

@risismail4719 6 месяцев назад

Tolong dibantu apa kira" yang rusak kalaupada posisiswitch dipep tidak bisa menunjuk jarumnya tans myfriend

@TonyAlbus 6 месяцев назад

For PEP measurements it needs to be connected to 12volts.

@andrewverran3498 Год назад

I have a similar cross needle Daiwa, the cross needle appear to move freely however when you tx and the left side power needle rises to its level , if you give the top of the meter a few slight taps the needle will move up some more, when you stop txing the needle won't fall back to zero, it will stay above zero the same amount it increased with tapping it, tapping it again results in the needle falling back down to zero.. Any ideas ? Cheers

@TonyAlbus Год назад

Hi, it sounds like they run free, wich is good, sometimes the meter is staticly charged.. if you have cleaned it a lot, maybe you charged it.. try opening the meter carefuly as i did. matbe you see something or by opening it discharges... you need to try somthing...

@andrewverran3498 Год назад

@TonyAlbus thanks Tony, you gave me the idea to feed the signal into the antenna s0239 and see if it reflected amout (on the other needle ) does the same.. Cheers.

@TonyAlbus Год назад

@@andrewverran3498 Just be carefull, the reflected is 1/10 of the power... good luck!

@andrewverran3498 Год назад

@@TonyAlbus gotcha ..only dealing with 20w.

@andrewverran3498 Год назад

@TonyAlbus have you any tricks of the trade for REMOVING STATIC that may be causing the problem? Much appreciated