TA-0404: Abestop AT312G DMM Generator Oscilloscope Meter 3 in 1

Подписаться 13 тыс.

Просмотров 1,7 тыс.

50% 1

Quick testing the AT312G 3in1 DMM with dial.
Cool the Generator can run while in Scope mode.
Abestop AT312G go.tonyalbus.c...
Related Tools:
Volt/Current Pro LB02A go.tonyalbus.c...
DMMcheckPlus go.tonyalbus.c...
Volt/Cur FNIRSI SG003A go.tonyalbus.c...
Voltage/Current LB02G go.tonyalbus.c...
Related Items:
MusTool MDS9208 go.tonyalbus.c...
Tooltop ET928 go.tonyalbus.c...
Zoyi ZT702S go.tonyalbus.c...
Zoyi ZT703S go.tonyalbus.c...
Zoyi ZT703S go.tonyalbus.c...
#abestop #AT312G

Опубликовано:

17 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@EfieldHfield_377 4 месяца назад

I find it hard to imagine who this would be useful for. The font is too… fill in the blank something negative… to useful as a handheld meter and as a scope like it lacks a proper probe and the display too small for a scope. Maybe I’m old but I consider the modern scopes portable. Thx for sharing.

@TonyAlbus 4 месяца назад

Thank you, yes some good point there... maybe we need to see it as a quick test, if you are on AC just to see how AC it is... just for low frequencies..

@zdzisiek1979 4 месяца назад

ciekawa konstrukcja. Pozdrawiam

@TonyAlbus 4 месяца назад

Yes seems strong.

@chevylization 4 месяца назад

I'm against multi-tool style multimeters, but might be a good trowa-round meter if it wasn't that expensive.

@TonyAlbus 4 месяца назад

Thanks! yes i think i agree

@schorsch4496 4 месяца назад

I don't like the display of the digits. They should use a simple, clear font.

@TonyAlbus 4 месяца назад

Yes good point!

@sbelectronicaindustrial6652 4 месяца назад

👍👍👍👌👌👌.....

@TonyAlbus 4 месяца назад

Thank you!

@mp1454 4 месяца назад

😊👏👌

@TonyAlbus 4 месяца назад

Thank you

@ssalient 4 месяца назад

"Scope" without BNC.. nothing more than a gimmick and maybe just useful for AC 50/60Hz waveforms.

@TonyAlbus 4 месяца назад

Upto 1 MHz is works fine.. but they are in a price range were you can get so many others also.

@thiloreichelt4199 4 месяца назад

Perhaps usable up to 1MHz. But that excludes e.g. mikrocontroller tact generation. Also, one channel only. Ok, you can use it to check e.g. signal quality on a line. But if I am concerned about the quality of a signal, it is probably pretty fast. Slow signals are generally not that critical. Probably good for someone who tinkers with analog audio equipment.

@TonyAlbus 4 месяца назад

@@thiloreichelt4199 Yes good point, also i noticed today, that the time base could go very slow... so the power form this meter is, that is can do that... they should have adverticed that instead of 12 MHz that is very unrealistic...