Table saw project #7 Making an extension fence/Simple but very useful item/ DIY / HOMEMADE

Подписаться 134 тыс.

Просмотров 364 тыс.

50% 1

I made a one-touch mounting extension fence to work stably and comfortably with the short fence, which is the weak point of the portable table saw.
A simple but very useful item.
10mm acrylic and 15mm plywood, using a small toggle clamp
Enjoy more videos on my channel.
Please support me by subscribing and liking!
I am CarpenTAK from Korea.
Please support the channel by becoming a paid member. Your support helps us create more exclusive content and improve video quality. Thank you for your support!
/ @carpentak

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 202

@bcole23 7 месяцев назад

I finally finished my version of this! Its fabulous. I have it on a dewalt jobsite saw. The infeed support is SOOOO good. I did make some changes. I added Jessem stock guides on the top. And for mounting it, i screwed a metal plate to the back of the existing fence and then used a mag switch to lock it down. Its more expensive, but it REALLY locks it down and is just one switch to latch and unlatch. Thanks for the inspiration!

@paulkrijgsman4098 5 месяцев назад

What a great idea with the mag switch, can you explain or send me a picture how you did that? thanks!

@bcole23 5 месяцев назад

@paulkrijgsman4098 I would love to to! But I don't see a message link on your about page. How do I send you a message?

@paulkrijgsman4098 5 месяцев назад

@@bcole23 Can you see it now? Thanks a lot!

@bcole23 4 месяца назад

@@paulkrijgsman4098 I cannot... 😪

@Mr2at Год назад

Wow you’ve squeezed so much more surface area out of a few mods. Excellent.

@gerhardpeter3011 3 месяца назад

Und der Taschenrechner passt auch rein 😂 grossartig

@squarelevelplumb 10 месяцев назад

That is nice and well built, but I get by with two fence clamps and two holes drilled into a piece of 3/4 inch stock. The aux. fence sticks over the front edge about 10 inches and allows me to start large pieces of sheet stock by myself, and i dont have to worry about something that large to store.

@Peter-976 7 месяцев назад

Agree. Same results can be had with less building.

@badawiq 5 месяцев назад

Can you post pictures of your build? Thank you

@Thedestressguy Год назад

beautiful execution and a super helpful upgrade.

@discerningx3375 Год назад

This is exactly what I was looking for! I have a different saw and stock fence, but the fundamentals are all there. Thanks for this.

@mcseforsale Год назад

Me too. Brilliant. I'll be making this for my Rigid jobsite saw.

@leewitherington4415 2 года назад

Great job! Will be doing this to my Dewalt! Thank you!

@dallasdynasty0077 10 месяцев назад

Looks great! I pat as well

@jorgedelucca1387 2 года назад

I became a fan of your's videos

@davidmiottel8736 11 месяцев назад

An excellent design and a very useful tutorial. I look forward to making one of my own

@JPToto 2 года назад

This is brilliant. Very well done!

@Mighty_Atheismo Год назад

Well. I guess my recreation activity for this evening is watching all of your saw mods in a lot of detail. You seem like the only guy skilled enough to pull a build like this off who hasnt already upgraded to a $4000 table saw.

@TheBillPayingHobbyists 22 дня назад

Do you have a video that shows your thick kerf saw to the right? Thank you for all of your excellent ideas.

@carpentak 22 дня назад

Sorry there is no video

@michaelpfistner5820 Год назад

Awesome job. Very well thought out.

@dasistes-8170 9 месяцев назад

Super Idee danke 👍🏻

@pb-bx1ll Год назад

Great video thank you

@stingk5295 Год назад

Great Video!

@marcusviniciusdeoliveira8269 2 года назад

Excelente adaptação. Parabéns e grato pelo vídeo 👏👏 Marcus 🇧🇷🇧🇷

@daayhsxavier Год назад

Vc conseguiu descobrir as medidas?

@GNU_Linux_for_good 5 месяцев назад

_well done_

@nickolasrichard7582 11 месяцев назад

Do you happen to have a breakdown or plans for this build? Great video. Thanks for making it

@carpentak 11 месяцев назад

I don't have any plans. Because you can't make it. thanks

@khaled8322 9 месяцев назад

Very very nice💪🏾🚪💯🇹🇳

@Zavrl_Lavigne Год назад

I have the same table saw and I also need this because my fence is bent out of square

@danmurphy7338 11 месяцев назад

I wish I could make one of those. Looks amazing and vert sterdy

@dwayneford1990 11 месяцев назад

I've been waiting months to make this fence. After I saw your video I knew I had to build it. I have all the materials but I don't see any written plans. Can you please tell me the dimensions of the white UHMW sheet? That's all I would need. I can figure out the rest. Thanks so much.

@carpentak 11 месяцев назад

Ok, 1000×115mm Have a good job!

@dwayneford1990 11 месяцев назад

Thank you so much!@@carpentak

@chriskelvin248 5 месяцев назад

I wanted to give this a thumbs up, but I saw that I already did that somehow….gotta love YT addiction

@LesAT49 2 года назад

In your reply to Jay Choi I was wondering about the second table saw. Did you ever make a video of installing it? I really enjoy watching all your videos, also I wanted to ask if you have any plans of all the parts of the table saw workbench, I would really like something to help me build one for myself. Thanks!

@carpentak 2 года назад

It couldn't be filmed. I don't have plans for the workbench. But on my Instagram, I have pictures of dimensions and details. That will help a little.

@jezza42 10 месяцев назад

Excellent video! Thanks for sharing. What is the white material called? And what thickness is it please?

@carpentak 10 месяцев назад

Thank you. It is 10mm white acrylic.

@jezza42 10 месяцев назад

@@carpentak great, thanks for the reply. Much appreciated 👍

@robertcornelius3514 2 года назад

Nice idea. I would love to do wood working, but I can't find me a hammer for we left handed users.

@brianstatler7257 Год назад

Sorry for my ignorance, can you please tell me what the white material is called so i can search for it. Love, love, love your videos

@carpentak Год назад

It is an acrylic material. It's a common material here in Korea, but it seems difficult to find in other countries. Thanks.

@benjaminadams9338 2 года назад

dang it now i have to make one of these....

@garytanner3156 Год назад

Great build, but would be much better with plans given dimensions.

@markchidester6239 Год назад

Excellent design! Next is a jig to cut a warped board straight

@joshualopez8834 8 месяцев назад

Awesome! I have the same saw how much? Ill cover shipping too lol

@carpentak 8 месяцев назад

Sorry, not for sale

@sulblazer Год назад

I love how the extended fence also has a support for longer boards....this is definitely gonna get made by me.

@PaganWizard Год назад

I have a Metabo table saw, which has a fence very much like the fence on your saw. I'm not sure how the fence on your saw would lock in place, before you built this fence, but on my saw, there is a lever on the far right side of the saw which is used to lock the fence. Would I still be able to use that, or would I have to install toggle clamps like you did?? I do not have a table extension on either side of my saw. My saw is still on it's mobile base.

@carpentak Год назад

hello. I think it would be better if you put an insertion nut on the right side of the fence and fix it with a knob bolt. It would be better not to damage the fence, but in this case, it seems unavoidable.

@PaganWizard Год назад

@@carpentak I wasn't referring to the fence itself, I was asking about the locking mechanism that is in the right side of the table saw. It's a small lever that is lifted to lock the fence, or lowered to allow the fence to move left to right.

@carpentak Год назад

My dewalt lock lever is independent on the right side of the machine. It's different from your metabo. So if you use the toggle clamp it will collide with the lock lever. So, I recommend screwing the bolt-on knob on the right side of the fence to tighten it.

@haksoonhwang8865 2 года назад

아크릴 자른 톱 날은 목재용인가요?

@carpentak 2 года назад

네 같은날 그냥 씁니다.

@devinedesignwoodworking8371 2 года назад

Do/can you adjust it for 90?

@carpentak 2 года назад

Yes i adjust it for 90

@banto1 Год назад

@@carpentak I have the same problem. Can you please explain how you added the adjustment for vertical square of the fence to the table? thanks!

@CesarFalcon Год назад

Do you have plans for this?

@carpentak Год назад

No I don't have plans.

@BarrySumpter Год назад

@@carpentak Gutted!

@carterscustomrods 9 месяцев назад

Rack and Pinion be damned!!! 😂😂😂

@gillesmurguet2743 Год назад

Bonjour, projet réaliser de mains de maître, mais si je suis d'accord avec la rallonge avant la table, je suis dubitatif quant à un guide complet, c'est à dire qui continue après l'axe de la lame. Pour la coupe en elle-même c'est inutile et peut d'avérer dangereux en favorisant des retours arrière violents.

@williammessenger9637 4 месяца назад

Not wasting my time where the content creator is either unwilling or unable to speak and articulate their process.

@gregmize01 2 месяца назад

Amazing comment😐

@ykmjc 8 месяцев назад

Just clamp an extension piece to your fence when cutting sheet goods. Don’t waste your time on all this unnecessary building, materials, over engineering etc.

@gerhardpeter3011 3 месяца назад

Und der Taschenrechner passt auch rein 😂 grossartig

@ToddHudsonAtl 5 месяцев назад

Thanks so much for showing us your work. I built this today and I'm surprised at how much I enjoyed building it. The resulting fence works SO better on my 20-year-old DeWalt jobsite saw.

@jean-lucmarquette4503 2 года назад

Voilà un excellent outil qui vient encore améliorer la scie Dewalt Cette réalisation est parfaite pour moi et je m'en inspirerai pour ma future machine qui bien sûr sera une Dewalt Merci pour ce partage Bien cordialement

@stormman8393 Год назад

CarpenBRILLIANT

@mickyork41 10 месяцев назад

This is great. Will be borrowing some, possibly all of this! You seem capable enough to also make a home-made SawStop-style auto brake. I look forward to that!

@markhedquist9597 2 года назад

Hey, I really like this! I have the same table saw. I think I will do the same thing to it. This modification is just what this saw needs, in my opinion. Nice job!

@jimrosson6702 7 месяцев назад

Great idea I need one for my DeWalt table saw

@chhiwattatanajat6729 2 года назад

ماشاءالله عليك بالثوفيق ويدوم التواصل مرحبا بك احلا بصمة لك 👍👍👍❤🌷

@alphaomega7325 Год назад

101 out of 100 points!!

@DomBurgess 5 месяцев назад

Nice. What saw is that? Looks almost identical to the Rutland one I just bought

@carpentak 5 месяцев назад

DEWALT DWE7492

@Supermachoo1 Месяц назад

That extra functional ! The only discomfort to me is having to adjust my measurement scale mark.

@hyuny4447 Год назад

안녕하세요~ 좋은 영상 너무 잘 봤습니다 저는 취미로 목공을 하고 있습니다~ 영상들을 보면서 너무 좋은 아이디어들이 넘쳐나 따라 만들고 싶은게 한두가지가 아닌것 같습니다~ 테이블쏘 사용할때 톱과 테이블 간격이 짧다보니 항상 불편했는데 저렇게 해결을 하셨네요~^^ 기회가 된다면 저도 한번 만들어 보고 싶어서 그런데 혹시 아크릴 넓이와 길이가 어떻게 되는지 궁금합니다~ 알려주시면 정말 큰 도움이 될것같습니다^^ 앞으로도 좋은영상 기대 하겠습니다^^

@carpentak Год назад

네 아크릴 10t 1000×115 입니다. 항상 안전하고 행복한 목공생활 하시구요. 제 채널에 많은 관심 부탁 드립니다.

@hyuny4447 Год назад

@@carpentak 친절한 답글 너무 감사드립니다~ 앞으로도 좋은 영상 기대하겠습니다^^

@jannitert6576 2 года назад

Hey, that,s a very good job you did! Like it very much, greetings from us in Holland 🌷🌷🌷 Jan

@JayRCartor 6 месяцев назад

Aluminum would be better and cheaper than plastic for this. GET a blade guard like a guard shark.

@nenadjurasin4677 2 года назад

I am very satisfied with your idea. It’s very useful Best regards from Serbia

@EEEZSolutionS Год назад

Very nice work - I've wanted to modify my DeWalt 7491 fence too.. this is a great idea and your craftsmanship is superb.

@mlubecke 2 года назад

Brilliant

@NapKingCole84 Год назад

Very nice! I like the shelf at the front to help support stock. I had an idea to make something like this, but embed a T-track in it so you can use those new wheeled stock guides that push down and into the fence. Really great build, I'll be sure to borrow some of your ideas!

@PF-hk6hn 2 года назад

Great work. This is the best one I've seen on RU-vid. I'm going to get to work. Thank you for the video.

@123adamjg 5 месяцев назад

Great video! Best one I've seen yet.

@claudej55 2 года назад

Simplement excellent !

@carterscustomrods 9 месяцев назад

Having 1 arm/leg, I've been looking for a way to mount board buddies to my small dewalt... this might do the trick. Now, show me how to get a flat table, and Dewalt might actually become a decent saw.

@henrysara7716 2 года назад

Congrats, very well done with details of quality in every corner your right auxiliary step for jig is the best in the whole web.

@allynhansen7398 5 месяцев назад

Buy a Bow Extender,........I did,.........

@RodriguesJuan 2 года назад

Good Job , congratulacion

@doakwolf 8 месяцев назад

Fantastic upgrade!

@MatthewKrieger 5 месяцев назад

So cool! The clamp you put on the new fence - that is just to hold the extension fence to the existing fence, correct? It is *not* to lock down the entire fence assembly I think. So you are using the existing locking lever for that? ps What make of shaper are you using?

@carpentak 5 месяцев назад

The existing locking device is used as is. I don't understand the second question. Shaper?

@attheworktable 4 месяца назад

Okay!

@gregmize01 2 месяца назад

Bravo!!!!

@someguynj 2 года назад

This is really well done. I have the same saw, I think this will make a big difference.

@FabricioSilva-xq3ht 2 года назад

Simplesmente perfeito ótimo trabalho mau amigo , obrigado por compartilhar!, Só uma dúvida qual nome desse plástico branco que usou ?

@carpentak 2 года назад

이것은 그냥 평범한 흰색 아크릴 입니다. 왁스를 좀 발라주면 부드럽게 잘 미끌립니다. 첫번째 댓글 감사합니다 !!

@blainlehman1018 Год назад

What great work. This is a must have for anyone with a short infeed fence. What is the white material? I have been looking for sheets of this stuff but don't know what it is called. Thank you.

@carpentak Год назад

thank you This is 10mm white acrylic. It is a material that can be easily bought here in Korea. You can also use other materials.

@blainlehman1018 Год назад

@@carpentak Thank you. I am very impressed with your work. Excellent craftsmanship.

@JamesWilliams-en3os 12 дней назад

Brilliant!

@HerrV29 2 года назад

Excellent👍👏

@domenicopetronella9766 2 года назад

Great work! Thanks

@BrandonCabanillas 6 месяцев назад

Can you please send pdf plans. I'm new to woodworking, and this is nice

@carpentak 6 месяцев назад

I don't have a plan. I can't make a plan.

@edonsmit3201 6 месяцев назад

Apologies for a potentially stupid question: Besides from the infeed support, what's the added value of all this additional material on the sawtable?

@dayyadi 2 года назад

Mantap

@richardsause5809 2 года назад

I always enjoy your videos. So many useful projects. Thanks

@carpentak 2 года назад

Thank you for your valuable comments. We will continue to meet with better projects.

@Mike-fu4bc 11 месяцев назад

Don't know where to find that white plastic.. I'm trying for 2 weeks to find it in europe anyone have a link please !😢

@balazslakatos9817 10 месяцев назад

tap-tap.

@albey1816 6 месяцев назад

That is the most complicated extension fence i have ever seen. But good work building it.

@courtenaybotterill5591 2 месяца назад

Love the sled camera angle 🙂 You should make plans from all your work, then we can buy a copy and make our own.

@webhjem 2 года назад

Tak!

@adamnagy5784 8 месяцев назад

I have stolen the design and it works pretty damn well! Love this channel Thanks for good stuff!

@dinost 2 года назад

팬스로 사용하신 소재가 인조대리석 같아보이기도 하고 HDPE 같아보이는데... 사용하면서 두 소재다 닳아서 갈리는 문제와 비틀리는 문제가 있습니다. 베크라이트로 팬스 많이 만듭니다. 그리고... UWMH라는 테잎이 있습니다. 마찰계수 엄청낮은 테잎이죠. 지그 만들때 유용합니다.

@wizardmaster6639 Год назад

ok - now I need to go buy the saw so I can make a fence for it. Or should I make the fence first?

@nudger44 6 месяцев назад

Do you have plans for this as I have same saw

@carpentak 6 месяцев назад

There is no plan

@mikedarr7723 11 месяцев назад

Making the most from the least technical path Well Done!

@huevoneousmaximus2309 6 месяцев назад

Just found your channel, good work brother.

@yannickd7925 Год назад

Excellent. I subscribe and I make mine 👍 😉

@jaytheist 2 года назад

I have watched this video at least a dozen times because I really like what you’ve done. Thanks for the inspiration! Btw, did you ever install a router and make changes to the fence on the other side?

@carpentak 2 года назад

Thanks for liking my video. I use the other side of the fence as well of course. There's a second table saw with a dado blade, not a router. When I first made the workbench, I planned to mount a router there, but I changed it because I thought it would be better to do it this way. And I have a new idea to install a router. I'll work on it and show you soon.

@baba_babaa2 Год назад

@@carpentak hey what's up I'm wondering if you can link to a video if you did it with the router that you would just talking about and how you did it, thank you so much!

@davidmiottel8736 11 месяцев назад

Yeah, that board support is the bee's knees.

@Sebastopolmark 11 месяцев назад

That is a GREAT upgrade to the saw, I especially like the infeed support coming off the new fence! !! !!!

@Naz_Vibes 8 месяцев назад

Do you have plans available?

@carpentak 8 месяцев назад

No plans sorry

@nasarazam 7 месяцев назад

Very precise and well done. this is beyond my skills. do you sell these for the Dewalt saw?

@carpentak 7 месяцев назад

I don't sell, sorry

@keithadams512 9 месяцев назад

You talk/explain and I'll watch. Have no interest in spending the first few minutes working out what you're doing. Some great woodworkers on here who start by saying - "today I'm going to be .........."

@miltonsimitsakos9666 7 месяцев назад

It’s pretty obvious that English is not this guys language which is probably why he’s not talking. The idea is nonetheless great and extremely simple to do.

@Spratlyk9 Год назад

Thank you for sharing this! What do you call the white plastic that you attached to the original fence? Is that a HDPE plastic sheet or something else? Where did you buy it? Thank you and hoping to hear from you soon.

@carpentak Год назад

It's acrylic. It's easy to buy here in Korea.

@Spratlyk9 Год назад

@@carpentak Thank you! Ill look for it here in our local big box store.