Tacoma Viper Cut: The Right Way

Подписаться 596

Просмотров 43 тыс.

50% 1

I’ve received a lot of questions on my viper cut so I thought I’d do a video answering the questions I’ve received. I ramble a lot I know, but I believe the info you get here will help you feel more comfortable cutting into your truck. With the right tools, this is an easy project.
Edge Trim: www.amazon.com/dp/B001EA0LJK?...

Опубликовано:

31 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@wstedpenguin 5 месяцев назад

One of the best tips I’ve heard about hole saws- do everything you did by drilling the hole, connect the hole saw to the bit, then run the bit counter clockwise until it scores the cutting surface, put it into clockwise motion to cut. Avoids the chance of skipping. Hope this helps someone!

@tysonschroeter4768 2 года назад

Nice improvement on the other vids covering this… I appreciate the attention to detail and technique. Thanks for throwing this together!

@byron.tattoo 2 года назад

Awesome video, man. Definitely a better and more measured way to do the viper cut 👍🏻

@stansbruv3169 Год назад

Excellent description of your effort. Thanks for sharing bruv. Looks GREAT!

@rickogden4512 2 года назад

Great video. Very good explanation. I'm saving it for when I'm ready.

@CarlosRobles-ub1fw 3 месяца назад

I just used this technique. Took me 45 minutes after gathering supplies and tools! Thank you for sharing this video!

@dave1096 2 года назад

that was really well put together.

@frankheffernan8066 2 года назад

Great job and excellent explanation. Keep doing videos of your mods.

@benscarbrough2818 2 года назад

Excellent breakdown, tips, and tool summary. Mod looks good too! Thanks, brother 🌮

@Rungunseattacos 2 года назад

Thank you bro 🤙🏻

@rhughes004 2 года назад

Great vid man. You explained everything very well.

@guetz28 2 года назад

I’m getting a Tacoma in a few weeks and I really like this mod. I’ve watched some videos of people doing this and the cuts on the curve and the fenders are terrible. Your video and explanation is by far one of the best!

@Rungunseattacos 2 года назад

Thank you! I know I ramble a bit but I just wanted to make sure I covered all the questions that I had going into this project. With the right tools, it’s super easy, good luck on your viper cut!

@ix0yEdotcom 7 месяцев назад

Dude - really great job explaining all the critical steps. Hero.

@trevork2697 5 месяцев назад

Just used this method, worked wonders thanks dude 👊🏼

@user-ch8vm3gl5j Год назад

Great video! Thanks for the excellent breakdown. Working up the courage to give this a shot!

@Rungunseattacos Год назад

Go for it dude! Good luck!

@Methadras 4 месяца назад

I’m working on a cover cap for covering the gap between the fender cut and the gap in-between to the fender liner to capture and close all of that off neatly and make it look like it’s organically integrate. I’m also going to include either holes for capture pins or screws. Not sure which yet.

@rickm4295 11 месяцев назад

Great video ! I think Im going to do this one myself. Good on you for leaving a lot of that fender well. The battery is right above that area. Luckily , im pretty good with hand tools also and this isnt much of a hassle considering the benefits.

@christopherfinch4692 Год назад

Alright, I'm gonna do it! thanks for taking the time to make this video brother

@Rungunseattacos Год назад

Sick dude! Good luck!

@t.j.bernard8952 2 года назад

Looks dope. Thanks

@shanemartinson5006 2 года назад

great vid bud!

@losttexan5199 2 года назад

Great video

@chrisfitzsimmons6410 2 года назад

Great commentary on this process my man, I'm making the chop this weekend.

@Rungunseattacos 2 года назад

Awesome dude, how’d it go?!

@chrisfitzsimmons6410 2 года назад

@@Rungunseattacos It got postponed because I'm an idiot and got the incorrect diameter on my hole saw bit for my drill chuck. This weekend instead...

@Pantovinator 2 года назад

Man that color is just so underrated for a Tacoma.

@VasquezTRD4x4 Год назад

Good job bro! Imma do this as well have the same BA4x4 bumper too. Nice build!!! Subscribed!!!!

@Rungunseattacos Год назад

Sick dude!! The viper cut definitely give a more aggressive look in my opinion. Especially with a center valance bumper.

@emorse912 2 года назад

With all the mods out there, I'm really surprised there's not an aftermarket wheel well made for the 3rd gen viper cut.

@timstover414 2 года назад

exactly, like just make a straight cut and rivet or bolt a molded piece of plastic to the existing wheel well and then to the existing portion of the bumper that is left. The kit could include a couple of templates to layout the cut.

@luismujica7917 11 месяцев назад

Awesome!!!!!!!!!!!!

@bobrun3573 2 года назад

Awesome Video’ Thanks for sharing! Where did you buy the weather striping?

@Rungunseattacos 2 года назад

Cowles T5602 Edge Trim, 18 Feet,... www.amazon.com/dp/B001EA0LJK?ref=ppx_pop_mob_ap_share

@johnvongkhamchanh8356 5 месяцев назад

Where did you purchase the rubber end strip?

@DaveRogers583 2 года назад

I don't know why no one I've seen hasn't used a reciprocating jig saw with alot of masking tape to mark and protect the paint. You can cut around curves and you can get blades specially for cutting plastic.

@user-iw5ce9px3f 3 месяца назад

viper cut........lmao, does it go faster or climb better ? or do the ear things help ?

@BunkGarage 7 месяцев назад

Main regret is my Tacoma isn’t 4x4 I got a 2020 one paid off so idc but I love this color. I may trade mine in for newer gen depends

@cmacblue42 2 года назад

👏👏👏

@jjcruz17 2 года назад

that triarc hat though

@jamieyarbrough5229 Год назад

Where did you find the edge trim ? What is name brand of edge trim

@Rungunseattacos Год назад

Cowles T5602 Edge Trim, 18 Feet, Black a.co/d/h595ZZp

@tylerlongwell90 2 года назад

Where are you located? IF not in FL are you ever in FL. I willing to pay you to do this?

@gonzalo27271013 2 года назад

Where can I get the trim that you put on it?

@Rungunseattacos 2 года назад

Cowles T5602 Edge Trim, 18 Feet,... www.amazon.com/dp/B001EA0LJK?ref=ppx_pop_mob_ap_share

@andrew5373 Год назад

Is this mod just for looks?. Or does it help with offroading ?

@Rungunseattacos Год назад

Little of both. Personally, I love the way it looks. But it’s also to help with clearance issues when running large tires. I’m running 33” tires and was rubbing a little on the front. After the viper cut, no more rubbing.

@Hunter_--_ 2 года назад

Can a auto body shop do this type of modification properly? Do you know or anyone else?

@Rungunseattacos 2 года назад

We have one local shop that will do it because they’re really big on modding Tacomas but most shops won’t do it.

@Lostnthesauce704 11 месяцев назад

What fender flares do you have on ??

@Rungunseattacos 11 месяцев назад

Stock

@nvideon 2 года назад

you got a Tri-11?

@Rungunseattacos 2 года назад

Sure do

@juanmcsweeney4503 2 года назад

6:59 of talky talky

@bomsexplosive 2 года назад

damnn bro that dude used a wood hand saw? lmfao

@NanceLvr 2 года назад

Where you located? I’m going to your garage so you can help me out 😝

@Rungunseattacos 2 года назад

🤣🤣

@chewy6942 8 месяцев назад

What is the point of this cut?

@Rungunseattacos 8 месяцев назад

Tire clearance and looks.

@user-ep6wd7ip7v 2 года назад

Viper cut us just asking for problems with water getting into every

@ryankc3631 2 года назад

Nah, that's okay.

@ggsdude1 2 года назад

So now theres a wide open space there exposing the engine and electricals? Wtf....

@RavenRunFoxRoam 6 месяцев назад

What specific component electrical or mechanical do you consider to be exposed now to the elements?

@BrunoGenovese 2 года назад

I will stay factory original look not into butchering up a brand new vehicle that costs thousands & thousands dollars only to make it look like a pile of junk because people just want to get bigger wheels & tires on makes no sense & will reduce by far the value of the truck for resale.

@areess6209 9 месяцев назад

Sounds like a you problem.

@zdr5191 8 месяцев назад

This seems pretty dumb. I don’t see any practical reason for hacking into your Tacoma. Here is an idea, just don’t.

@Rungunseattacos 7 месяцев назад

I have a better idea, just let people be happy and do the shit they want with the money they spent. I bought the truck, not you. Go enjoy your things the way you want and I’ll enjoy mine how I see fit 🤙🏻