Hiya Mark, as you already know, screw BB2 is in Bag B (BB), the 3mm nut BC1 is in Bag C (BC) and so on.. BR (Rod Bag), BH (Hardware Bag).... The letters tell what bag. Ah Yes, Don't ever forget those 3mm nuts in the cases (unless your putting on 4 link bars). Such a great start dude!!!! I would say your half done other than the body.. Have a great weekend my friend, ATB to all!!!! Here if ya need me.
Hiya Brother Bob! I'm lucky to have you covering my back and sending such sage advice! Man, I'd never have worked out those part and bag numbers, they should tell you that in the build manual!!! Yeah, I thought I was about half done, lots of repetition on this build though! 8 shocks to do! A smashing weekend to you too, mate, many, many thanks again and cheers for sending those parts!
@@MarkBryanRC Hey Dude, that's why we are all here, show casing & help!!! I remember the bag steps from my early Tamiya kits (they did mention those bag letters back then) they also showed the hardware to scale on the headers (your beetle should have been that way). Yes sir, 8 "shocks" but they build super fast (not like the TXT-2). As for those extra bits, brother you are so welcome (Rob Too), Your help to me is priceless as is your friendship, I kind of had to do my part for planting the idea in some ones head. ATB my friend and the best to everyone!!!!!!
Ah brought back lots of memories of my build mate. But hay I did only finish mine a few days ago hehehe😄 Great build so far dude you'll soon have it finished. Let me know if you want to paint it around mine? Slater matey.
Hi dudester, haha you have a memory about as good as mine! Yep it's coming along nicely, I'll be ready for paint soon. Thank you for the kind offer, I'll take you up on that one matey! Cheers! 😁
Digging through bags nice old school touch :-) that's how I started with Tamiya. These are nice kits to build and still very popular. My nephew has the original 80's version.
Thanks Mal! Yeah this is a real throwback to the 80s for sure but enjoyable all the same. I don't think it's changed much since then! All the best mate! 👍
Amazing start Mark and thanks for sharing. The Clod looks like a beast and a proper Tamiya where all the bags get dumped into takeaway containers and the fun begins 😂
Thanks my good friend and thank YOU for watching! Oh yeah, it is a beast indeed, can't wait to get those massive tyres out and fitted, then it'll look proper! Hehe, there really were tons of metal bits to dump into containers, it was hard to know where to start! All the best, matey! 👍
Hi Addam and thanks for the visit, dude! Wow, 3 built already?!?!?! This is obviously my first and I'm loving it already! Hehe, yeah, Bob and the Elf told me about that pesky nut! I got good guys covering my back! Cheers, Addam!
another awesome build brother love the step by step guides can see every you get and tips along the way she gonna be a beast this one brudda 👍enjoy marky !!
Thanks a ton, brudda! Yeah I love doing these builds and videos, it's how it all started for me on here! Definitely, this truck has got "BEAST" written all over it! Cheers, dude!👍
Thanks a ton, Dirk! Definitely, if you don't centre the servo it will all have to be unassembled to get to it for adjustment! All the best my friend! 👍
Hi there Mark, oh boy! That Clod Buster seems just the right kit for me! I love the kits that you have to have all the bags open and your absorbing yourself in the hunt for the correct components, for each step….so wish I could have one too 😊. The Subaru Brat was like that, open all the bags, just lived it. Just love listening and watching you get stuck into the build. Have a lovely weekend, Best wishes to you all 😊😊😊
Thanks John! No I don't think I've built one where you have to open all the bags at once before! Good fun hunting for the parts though! You would love this build too my friend. Glad to hear that you enjoyed it! Hope your Sunday is going well, take care mate! 🙂
Hi Mark, as usual great video. I like the camera position that films perfectly as I was at the work. Waiting for the next steps my best wishes and Ciao! Nanni
Awesome, thank you Nanni! Yes, the camera directly above the workbench allows me to assemble easily and gives a good perspective on the build! All the best my friend, ciao!
Evening Mr Bryan! Everyone loves a Clod! 😍 Another superbly presented video matey, I'm guessing this will be a great help to less experienced builders.... the detail is very comprehensive. 👌 Knowing you it must have been very hard saying 'brass balls' and 'flange nuts' so many times without a cheaky giggle! (good job Rob wasn't there!) 🤣 Looking forward to building mine, still not sure what route I'm going yet..... been looking at the aluminium and carbon 'frame chassis' and servo on axle steering mods available from the clod shop. So many upgrades available, unfortunately it's starts getting very expensive so will probably be a project for when finances are a little better! I'm a tad concerned that the stock ABS plastics won't last too long the way our trucks get run so these upgrades could work a treat! 🤣 Regarding the screw bags, I seem to remember this is the way Tamiya used to do it back in the day? But I may be wrong, the eighties were a long time ago! Can't wait for the next instalments bud, and really looking forward to the running videos.... These things are a delight to watch! 👍 👍 👍 👍
Hiya mate! Glad you thought it was detailed, I try to make these videos so you could build along without a manual, well, that's my thinking anyway! Yeah I did struggle with the balls and nuts double entendres! :P These Clods sure can become expensive if you go the upgrade route so I'm staying stock(ish) with mine. Lets see if I break it! I don't intend to do anything crazy when running it anyway... but this is me and I know I often get carried away! Fingers crossed! The 80's are a blur to me, too... so many beers ago! Thanks for the kind words, buddy, all the best from me! 😉🙏👍
Very nice to follow along on this one, Mark! I don't think I've ever seen one of these being built before, so it's quite interesting! I don't think I'll ever be building one myself, but at least I can enjoy yours! As always, I'll be looking forward to seeing next parts, and of course see the mighty machine out it its element, together with Rob's version, also. All the best, mate, have a great weekend!
Hiya Mads! Yeah I don't think there are many step by step build videos for this one, Bob told me I had to do it! You just might get one someday! Same here, the building is good but the driving is better! Take care mate and hope your Sunday is going well 👍 😊
Hiya matey. Well that's all coming along nicely. I can't help thinking that there is a lot of that famous Tamiya shiny brittle plastic on that. I'm trying to think what will break first in a roll over. Body posts I'm guessing 🤔 Anyway I'm sure you will be super careful while racing against Rob! All very well explained as ever mate. Looks like an interesting build. Cheers for now and enjoy your weekend 😁👍
Hi mate! Hmm, yes I think you are right ✅ about the plastic, and I've been told that the body posts go first! I won't be running it much with the stock body though. Definitely a basher shell for racing Rob! Thanks for the supportive words, Pete.🙏 definitely enjoying the build though! Hope your weekend is going well! Cheers 🍻 😁👊👍
You bet, mate, there is a lot of hardware and screwing involved in this kit! It should be me thanking you for watching and leaving a nice comment, cobber! All the best! 🙏😉👍
Hi Paul - yes this is a bit of a tricky build, you really need to study the diagrams in the manual to get things right. Definitely well made even for such an old design! I agree, this truck has awesome written all over it! Cheers! 🙏😉👍
Love the build you are doing Mark, you are persuading me to get a new Clod! Question, could you buy a new clod and spray up some parts to make it look like a vintage Clod? Get some red to paint the parts and paint the body? Awesome as always.
Hi Chris, hope you are doing well, pal! Oh yeah, every Tamiya fan needs a Clod! You could definitely spray the body any colour you like and I have seen others spray the detail parts like the bumpers in different colours, too. Gotta be worth a go! Thanks, dude, sending good wishes across the pond!
Thanks Dom, yeah there is a lot going on and it's trickier than most, i seem to be making more mistakes anyway! Good job I got Bob watching my back, he's been a great help! 🙏😉👍👍👍👍
@@MarkBryanRC no worries. Currently the bathroom is ripped apart and 'my room' is being made smaller so nowhere to build something that big. Just finishing a Race truck on the TT01e though... so best stop there for the moment
Hope the bathroom refurb is going well - sometimes real-world issues come before our hobby! Good luck with the race truck, I'll pop over soon and see how you are doing! :)
@@MarkBryanRC cheers. Hopefully the bathroom will be done by the end of the week. Other things happening so hopefully more time coming up in the next few months so that'll mean more RC time. Can't be a bad thing 😀
Well done once again Mark my friend. This is a pretty awesome rig. Got to love that stance. Looking forward to seeing this thing come together. One of my favorite Tamiyas to watch for sure. Next to the lunch box, I think. lol Thanks for sharing. Have a good weekend. :)
Hiya Nick and thank you for the kind message. You are right about the stance of this thing, it just say "watch out, I mean business"! 😁 Gotta be on of my favourites too! All the best my good friend, take care! 😉👍
Gday Mark, This is a build that ive been putting off for two and a bit years now and watching this I know why ,lol do step then repeat and repeat and again but once you get cracking on i can see the sign to the inn in the end , Massive thanks for showing that its not that heard just that you need to pay full attention and have all the bits required for each step set out in front prior to starting the step but thanks to the RC Elf for this beaut kit for the channel cheerio guys 🙂
Gday again Andrew! Absolutely, mate, you can easily do this kit, it's just as you say, pay very special attention to the diagrams and take your time, when you get one bit right, the rest is just repetition! It ends up being quite relaxing and rewarding in the end! And yeah, the RC Elf is THE MAN!!!! 🙏😎👍
Why didn’t Rob help you with it? Wait, don’t tell me! It’s the friction dampers isn’t it? 🤣🤣 Well done Mark! You touched on the two very important parts of that build so far (centre the servo before installation & making sure the two nuts are captured in the gearbox (now that sounds wrong, don’t it!?😂) Thanks for sharing My brother from the RC mother! Look forward to the next. 🍻👊
Haha 😄 yes he hates those friction pogo sticks 🤣 Thanks for confirming that I got the important parts right! I know you know these trucks inside out! Thanks for watching and leaving a great comment my friend! All the best! 😉👊👍
As always Mark, a very thorough and well explained build video. I'd imagine this build series will be longer than normal, due to the complexity and number of parts that come in this kit, but it's all good as I find these videos kind of relaxing - watching someone else doing all the work...😀. Does this Clod come with ball bearings as standard in the kit or did you add your own. Also do you plan to add the rear wheel steering option to this one ? Great stuff mate, looking forward to the next instalment...😀👍🏻.
Hiya dude! Thanks for the great comment as per! Nah, I think the chassis will be finished in part 2, yes there's a lot more than usual to put together but there's so much repetition and I only show one of each! Glad you find them relaxing, I brick it during filming in case I get it wrong, an believe me I often do!!! 😅 Bob was a star 🌟 and sent the bearings! Oh and the RWS isn't an option, you can't lock the rear steering without buying other parts! Hope your Sunday is going swimmingly, take care mate! 🙂 👊🤝👍
Hey Chris! No my friend, the only upgrades I did was to fit ball bearings and steel pinions. As this is a special version (and from the RC Elf) I like it the way it is! I may get another standard Clod later and hop that bad boy up!!!
Despite its age, it is still one of the few RC monster trucks that actually looks like a monster truck. Did Tamiya ever explain why the grey version is only available in limited markets?
You got that right, dude! Such a classic design and a timeless truck! As Bob said, it was a one-off production run for Horizon/Tower Hobbies only for the US. Cheers! 🙏😊👍
@@MarkBryanRC I always wanted one when they first came out in the 1980's but decided to get something slightly different and bought a Kyosho Double Dare instead (not my best RC buying decision!). This put me off the Kyosho brand for decades...
@@BlackSeaRC Yeah, I always wanted one, too, but they are expensive for what they are... never heard of the Double Dare, but thanks to you I will be avoiding it! I only have the Scorpion, and I really love that buggy! Cheers!
Sorry, probably not the right video for this question, but it is about my tamiya TT02. I bought a 1998 ford escort kit and am in love with the rims that come with it. The tires recently worn out too much and I want to keep the rims, but get new tires. Where can I find road tires that fit these rims?
Hi Cooper - you can fit the standard Tamiya road tyres, they are widely available, here is the product name and no: Tamiya (part number 50419) Racing Radial Tires 2 Pcs (26mm) I don't know where in the world you are, but you should be able to google a store that stocks them near you. All the best!
Great videos mate,I have a super clod buster on my list of builds along with the Agrios. In your opinion is the clod worth upgrading or more fun keeping as standard?.
Hi Mike! Thanks! You will love the builds of both those monster trucks. Very different though! As for the Clod, I'm leaving mine stock as it's a hoot just as it is. Might be worth adding a couple of peppier motors later but remember you can't used timed motors like the Sports Tuned as the rear motor works in reverse. Have fun with them, mate! 😎👍
On Step 4, I notice when you attach the metal plate on one side with the BH3 6mm ball connector on the other, there are gaps in between designed for captive nuts, however the manual doesn't show inserting them. I put them in anyway as it would seem to add strength, though I do worry I'll be short 4 nuts at the end of the build. Anyone whose come across this, I'd like to know what you did! Thanks :)
I must admit I never noticed those gaps when I built mine. I haven't had any issues though. Thanks for pointing that out, I wonder if anyone else did the same as you? 🤔👍
Cheers, Brian! Yes, I did paint the body and it came out pretty good. If you are interested you can see it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RdAGDbL37mA.html
@@IowaBudgetRCBashers Hi Thad, something crazy is going on, you put it together the same but your dogbone end e clip is not flush against the bearing like mine is. I think the e clip on the gearbox end must be in the wrong slot, other than that your kit must have come with wrong sized axle tubes!!!!!!
