Tamiya TT-02 Brushless 4.5T 64 26 gearing P9  

Hehehe, Yeah he's a bit of a scamp is old Shoebert. Well dude I have gone all out with 29T and motor set to +20 degree timing for one last run if it stays dry today. Cheers buddy and good luck with anymore runs you have planned.

Ah the T-shirt I was going to do a bit about it and my one pack😁😀👴 as it's far to tight really but as usual completely forgot doh!!! I've said it loads of times but if you have dual rate adjustment, turn it down as low as possible. you may have to do three point turns even on a wide road but it's better than spinning out. Good luck catching the Petester guys. Got one more run to do with 29T pinion and motor timing fully advanced so 🤞Many thanks and ATB guys.

@@robbrennanrc Cheers dude. Yeah we have had the dual rate dialed as low as possible right from the start bud. The car is a piece of crap..... I'm not a fan of this chassis to say the least! One wheel points left while the others straight, no amount of tracking will true it up as the whole front end geometry is totally out. There's no adjustable steering buckles to fine tune things, just those awful fixed plastic braces! But, we are going to send it anyway mate...... new ESC programing box on its way (to re map the power range/increase the timing) and a set of foam tires, and a 30 tooth pinion! Hope it all arrives in time. We did a run yesterday, which should be out soon..... gave you a shout in it and admitted our defeat! 🤣 I'm doing my best to kill that bloody car but it just keeps going!! 🤣 Looking forward to your final blitz Rob, I'm confident you will clear 60mph bud! 😊 👍 👍 👍

Hi Craig. I think he liked Basil from when he was a kid🤣😅😂🐿️ Cheers mate and hope you are feeling better and can get out for another run to catch Mark.

Hehehe. I think we were both so shocked at how fast it looked we kept freezing and forgetting what we were doing🤣😅😂 Thanks for watching and ATB my friend

No real damage just the R-clip came out. patched up the body ready for an all out last run. Thanks for watching and ATB buddy.

I hope so as it will be my last run for this contest. Many thanks for watching and ATB Mark.

Hi Addam. Yep just a few cracks in the body and it's all fixed now ready for my last run. Many thanks for all the encouragement and all the best buddy.

Hi Mads. That sound was all four tyres ballooning so much they rubbed on the body wearing the paint off🤣😅😂 I keep spare cut-offs of Lexan for just such occasions so body all fixed and strengthened ready for my last run with bigger pinion and advanced timing on the motor🤞Many thanks and ATB to you and yours fella.

Hay Damian. Yeah they sure are crazy and I just don't know how these guys are able to control the cars at 100+. One last all out run to go if the weather holds. Thanks for watching and ATB my friend.

It wouldn't be one of my speed runs without a walk of shame🤣😂😅 Thanks for watching and all the best my friend 🐿️

One more go with everything set to max🤞 Hehehe I know what you mean dude. Thanks for watching and ATB Dirk

I do know what you mean Pete. The faster you go the more chance of destroying the car, but for me I have two other TT-02 chassis so it won't matter too much if it takes me a while to get this one repaired. One last run maybe today if it stays dry. Many thanks and Go on, one last ditch attempt matey.

Hi Tony. I almost ran him over at one point (Ouch that would have hurt at 59) Thanks for watching and ATB my friend.

Same here Thad one last run with 29T and motor advanced by 20 degrees. Don't think Ill get to 70 though. Many thanks and good luck guys.

Hopefully 60+ on my last run if we ever get chance to go out. Cheers Dom

Hi Derek. Either that or it doesn't like certain phones. Anyway I have another app to try so🤞I do think for my last run 29T motor timing advanced that I will get 65+. Just need some dry weather. Many thanks and ATB matey.

It's his own fault. He kept on telling me he'd forgotten it but I think he left it behind on purpose cuz he thinks he's a stunt squirrel and indestructible😂😅🤣🐿️🐿️🐿️ You could be right but we only have time for one more run so I've pulled out all the stops, 29T pinion and fully advanced the motor timing🤞 Yes mate just the body. An R-clip came out so the body was bent out of shape by the body post. patched up the wing and strengthened the front body post holes. Thanks for watching and Shoebert sends his love🐿️🐿️🐿️🐿️🐿️🐿️🐿️🐿️

@@robbrennanrc Stunt squirrel 😂 He should bounce ok if he falls anyway!. Should strap him to your car for a squirrel hot lap😀. Your car accelerated so fast on your last run mate!, it sounded like it was still wheel spinning when you hit the brakes. I hope you can find a good piece of road for your next run Cobber. Looking forward to seeing the 29T fitted!. We reckon you'll get over 70. Glad it's a simple fix Rob, it looked really bent up!. Love back to the crazy stunt squirrel from us in Oz😁👍

Wow cool. Only got a 29T for my last run but have fully advanced the timing on the motor as well. Just hope our track is long enough. Many thanks and ATB buddy.

Many thanks Joe. Hopefully more to come from my last run, if we ever get a dry day.

Hi Tom. Yes man it's a bit limiting. It is quite a long run but it's only empty on a Sunday😟🐿️and as such only have one more day for a proper run so I'm going all out with the resources I have. Thanks for watching and ATB my friend.

@@robbrennanrc love the Videos. You and Mark really make for fun Videos. Keep it up Guys...

Hi James. Thanks for that but I already have it down to 20% and if I go lower the servo doesn't centre. Thanks for watching.

I thought it felt heavier than normal😅😅😅🐿️ Thanks for watching and ATB my friend.

Hehehe. I would if he were a grey squirrel as they are vermin but our lovely red ones are/were home grown 😂🐿️🐿️🐿️👴 Thanks for watching and ATB buddy.