Tamper Proof Security Screws | Fasteners 101

Подписаться 35 тыс.

Просмотров 91 тыс.

50% 1

In this video, one of our resident fastener specialists discusses tamper proof security screws. The specialist showcases the various types of security screws and the bits required to install them. He also demonstrates the installation of a couple of tamper proof screws into a license plate.
Need some tamper proof fasteners to secure your stuff?
Find all the security screws used in the video here: www.albanycountyfasteners.com...
Looking for a specific type of security screw?
"Snake Eye" Spanner screws: www.albanycountyfasteners.com...
Torx Styled (Star/6-Lobe) with Pin screws: www.albanycountyfasteners.com...
One-Way screws: www.albanycountyfasteners.com...
Tri-Groove nuts: www.albanycountyfasteners.com...
Security Bits: www.albanycountyfasteners.com...
For more Security Screw information: www.albanycountyfasteners.com...
For all your other fastener needs, please visit us: www.albanycountyfasteners.com
For more Fasteners 101 information, please visit our website here: www.albanycountyfasteners.com...

Опубликовано:

14 фев 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@MOTTOTROOPER 5 лет назад

Would’ve been nice if you could done close up shots of the screwheads that way we can clearly see which screws or what

@AlbanyCountyFasteners 5 лет назад

There are close-ups of the screw heads in the bottom left corner as each is introduced. We apologize that it may be too small or lost in the background to be readily noticeable. You can also find the screw head close-ups and more details on our tamper proof fasteners here: www.albanycountyfasteners.com/Tamper-Proof-Fasteners-Security-Screws-s/1631.htm We hope this helps you!

@leefiles 2 года назад

@jose ramos I did that. I dremeled some one-way screws in the past. easy.

@TehBIGrat 2 года назад

Don't forget single use fasteners for prisons and phyc wards. We install security fencing in those places that bolt together. Once torqued the "hex" breaks off the nut.

@TroutFink Год назад

Once torqued just means weakened compromised metal. The Andy Dufresne’s have time to work on that. Mexican cartels laugh

@jfbaro2 2 года назад

Amazing video. I am looking for screws to be used on solar panels installed on a remote solar farm... to make it harder for burglars to stole my solar panels. Thanks for sharing!!

@drainmonkeys385 4 года назад

I do drain cleaning ..and I’ve never had to use anything other than standard Philips #2 #3 ... until at a sams club store... the cleanout cover was on with a snake eyes scanner screw.. I had a bit for that.... but was the first time ever... I’ve cleaned probably 10,000 drains and never needed it

@paulrayl9470 3 года назад

What would you use for a 3 hole spanner screw? I can't find a bit for it anywhere.

@kingpolaris 3 года назад

appreciate the video. i was looking around and couldn't find an answer to the question: would a security torx bit work for a standard torx screw head? Ypu very clearly answered that with a yes . thanks!

@AlbanyCountyFasteners 3 года назад

You're welcome! Thank you for your feedback.

@hermangilliam6682 2 года назад

Hello, great video I had my license plate stolen 2 days before the 4th of July in front of the house, and I went to the local hardware and purchased the snake 🐍 eye screws Unfortunately the course thread machine screw didn’t work, I have a German sedan and would like some advice on getting the correct thread snake eye screws ?

@jimanderson1554 3 года назад

I made a once use socket that had very little clearance on a counter sunk screw and then drilled the centre of the screw out.

@hawaiiandano4014 3 года назад

Do you know where I can pick up a Gulmite #10 tool? (reasonable price) Thanks!

@anmolagrawal5358 Год назад

For the one-way screw, if you bring an object with a REALLY powerful magnet, would that work?

@tubedude4859 2 года назад

most important .Where do you buy em

@CaptainBardiel 4 года назад

I need a Torx T9H

@rhettarded 3 года назад

Hello, I'm looking for screws for a laptop. A lenovo one. Thanks

@PeterGregg Год назад

OMG all this trouble and we couldn't see the heads and most of the time the screw length or size. It's a shame.

@elsaarmstrong-zp6ng Год назад

Get a one sided riveting tool, you squeeze the trigger until the centre pin snaps! Only drilling the tough rivet will release it!

@tristantaus4556 2 года назад

I used to dislike those security screws until I bought me a security torx set bit and now I got no need of thinking on how of removing them if needing to.

@scalamasterelectros3204 2 года назад

finely i know how to steal those hotel tvs

@Daniel-dj7fh 5 лет назад

im searching for a bit or screwdriver, the screw head looks like a tri-groove but with tringular groves in the screwhead.

@AlbanyCountyFasteners 5 лет назад

Hmm...without seeing the screw, there's a few things that could be. Our first thought is that it may be a tri-groove screw, which can be fastened with the same drivers the tri-groove nuts are fastened with, or a tri-wing screw. It's also possible it may be a proprietary screw, unique to whatever it may be fastened into. Honestly, the best way for us to help you with this is to send an image of the screw to support@rawproductscorp.com where we can take a look at it and give you a more definitive answer.

@Daniel-dj7fh 5 лет назад

@@AlbanyCountyFasteners it's a screw holing the case of a electric socket extender. i havent seen any tri-bits or stuff like that online

@sjguy1099 Год назад

WHAT WOULD I NEED TO KNOW TO GET THE RIGHT BOLT TO FIT/REPLACE? LENGTH & THREAD PATTERN, ETC. ? IS THEIR A CHART OR TOOL TO DETERMINE THIS ? I WANT TO SECURE MY EBIKE DISPLAY UNIT THAT HAS 2 HEX BOLTS ON THE HANDLE BAR MOUNT. BATTERY MOUNT USES HEX BOLTS TOO. I COULD SECURE ALLOT/ALL SCREWS/BOLTS WITH YOUR PRODUCTS. LIKED & SUBSCRIBED TO YOUR CHANNEL. THANKS.

@charleshamilton585 2 года назад

You aren't showing the screw heads up close!

@Ithinkimaybealesbian Год назад

Would have been nice to have seen the heads of the screws

@jakegonzalez8060 3 года назад

Im trying really hard to find something for a tamper proof 8 point screw but can't find anything at all its driving me crazy. Tamper proof spider driver. Can't find

@AlbanyCountyFasteners 3 года назад

A tamper proof 8 point screw? That's very uncommon. Wherever you got it from, it is likely specific to what it's fastened to. I would contact whoever the manufacturer is for recommendations on drivers for that.

@drainmonkeys385 4 года назад

For a license plate... I would use 4 different security screws...they are so small.. you’ll never see it... but you’ll ruin the day for the asshole trying to steal/ remove the plate

@jayhawk6767 2 года назад

So, what size for license plate?

@AlbanyCountyFasteners 2 года назад

#12 x 3/4"

@petermalone1494 4 года назад

WHILST TRYING TO RECOGNISE AN ANTI TAMPER SCREW I HAVE THE DEMONSTRATER WAS LIKE A JUGGLER - TOO QUICK FLASHING THE VARIOUS HEADS ON SCREEN

@AlbanyCountyFasteners 4 года назад

I'm not entirely sure what you are trying to say, but if you need to see the common types of tamper proof screws you can always visit our website for more details: www.albanycountyfasteners.com/Security-Fasteners-Tamper-Resistant-Screw-s/859.htm

@jerrylindstrom3323 3 года назад

left bottom side on the video

@vivianoni9565 4 года назад

License plate: H91 HLW

@dpearson80808 3 года назад

Viviano Ni Don’t you mean “Licenplate”? Just a regguhlar licenplate. Don’t use thu regguhlar tawks bit in a security-uhh- tawks screw.

@tryagain.k1821 Год назад

Security screws are only security screws if you can't buy a set of "security bits" to undo them !

@TehBIGrat 2 года назад

It's called Tamperproof Torx hence the "TT" on your driver. Anyone making up names is wrong.

@DanielGonzalez-tt1tk 5 лет назад

Dude where is the close up of the screws 🤔🤔😂

@AlbanyCountyFasteners 5 лет назад

@TroutFink Год назад

Who steals a hotel tv? 😂 the bits cost more than the tv

@adventurously_random 3 года назад

3 min in i nearly fell asleep 😴

@IWillBrutalyRemoveYourBalls 5 месяцев назад

As an electrician those one way screws are my worst nightmare

@AlexAvet53 4 года назад

It could have been much better if you add some colorful flowers on purple handles. Also could have been best seller if kit contains free green shorts with Camomile pattern.

@AlbanyCountyFasteners 4 года назад

Thank you for your feedback.

@hungry2hear 4 года назад

This guy was subbing in for the regular guy. You should know your company's products well before attempting to showcase your products!

@drainmonkeys385 4 года назад

C Daub shut up... there is always one of YOU in every comment section.. go ask your gramma for $5 and get some boonsfarm

@lisocampos8080 3 года назад

Im sorry but why do bathroom partitions need security screws? They are there for a purpose. Maybe something that happened in the past. Are people stealing panels or something?

@AlbanyCountyFasteners 3 года назад

You'd be surprised what some people might steal. It's more just to prevent random people from messing with the installation in any way.

@milky2190 4 года назад

Your name would be Bob

@need100k 4 года назад

So a thief just needs to order the bits and the security screws are no longer secure.

@AlbanyCountyFasteners 4 года назад

Security bits are typically much more expensive than standard drivers (especially trident nut drivers), but if they know the correct size, a thief could potentially unfasten security screws. Tamper proof screws are used more as a deterrent and are by no means a full-proof way to prevent tampering. Though your only alternatives to make something truly tamper proof is to either pay a lot of money for custom made proprietary fasteners specific to you, or to weld your fasteners. Given the options, tamper proof screws are the simplest and most popular solution to make things harder for would-be thieves.

@ALovelyBunchOfDragonballz 4 года назад

Basically. If a thief has the key, a lock does no good either. Its a deterrent, mostly. I find that red loctite is also a good deterrent.

@need100k 4 года назад

@@ALovelyBunchOfDragonballz I need it for a wood application. In any case, I know that security screws are merely a deterrent. In this case, a simple pair of vice grips will do the job just as easily.

@ALovelyBunchOfDragonballz 4 года назад

@@need100k could try some Robertson Drive [square drive] very few people have that bit. Its tamper resistant as is.

@beilno2890 4 года назад

@@ALovelyBunchOfDragonballz Unless you live in canada where they are everywhere

@JerrlEvans 3 года назад

I think these screws just frustrate people that honestly need to repair something. I thief is going to get what he wants. Just a whole set of screws and associated tools to piss you off because you don’t have what you need. Then you go to a local store and they look at you like you’re crazy. You order it online and project has to wait. Makes no sense.

@archwaldo 3 года назад

If a security screw pisses you off, then it's doing its job.

@TehBIGrat 2 года назад

You can also buy TSA master keys online. Screws and Locks only keep honest people out.

@paullalekna5478 5 лет назад

Only in USA is a COUNTERSUNK screw called a flathead. Uggghhh! Nor does he mention Trilobes, 5-lobe, and a whole more plethora of critters

@paullalekna5478 5 лет назад

Tri-wing, Clutch, and more

@paullalekna5478 5 лет назад

And talks about a 'Nice Car' but it's a JEEP

@AlbanyCountyFasteners 5 лет назад

Thank you for your feedback.

@ALovelyBunchOfDragonballz 4 года назад

Well, "Fasteners 101". You should've searched for at least Fasteners 103 if you already took the pre-req courses.

@helenposey1017 4 года назад

Close up! So tiny I couldntnsee

@AlbanyCountyFasteners 4 года назад

Thank you for your feedback.

@EagleFPV43 4 года назад

Look in the bottom left

@lisocampos8080 3 года назад

Your not supposed to see. These are security fasteners.

@ihgoo9926 5 лет назад

pain in the ass when u trying to fix shit

@AlbanyCountyFasteners 5 лет назад

Very true! When tamper proof fasteners are installed they are designed to be very difficult to remove unless you have the proper tools to do so. If you need to fix stuff that's often secured with tamper proof security fasteners, might I recommend a security set to make a little less of a pain: www.albanycountyfasteners.com/Bit-Driver-Sets-s/1050.htm