tapper milling operation on vmc || vmc programming

Подписаться 24 тыс.

Просмотров 33 тыс.

50% 1

in this video i am going to show you how can i do milling operation with tapper mode, by end mill, and work offset with tool offset and operation demonstration video.
#CNCVMCTECHNOLOGY,
MORE INTERESTING VIDEOS ON CNC VMC TECHNOLOGY
radius calculation by I and k || radius calculation in CNC program
• CNC programming || rad...
IATF-16949 STANDARD FOR QUALITY MANAGEMENT SYSTEM-3RD PART
• IATF-16949 STANDARD FO...
IATF-16949 STANDARD FOR QUALITY MANAGEMENT SYSTEM 2ND PART
• IATF-16949 STANDARD FO...
IATF-16949 STANDARD FOR QUALITY MANAGEMENT SYSTEM 1ST PART
• IATF-16949 STANDARD FO...
Shank turning rough and finishing on CNC machine
• Shank turning rough an...
facing, drilling, chamfering, and tapping operation on cnc
• cnc programming in hin...
setting work offset on cnc machine ,
• cnc programming || se...
Boring, grooving, turning, facing, and drill operation| || socket machining in cnc
• Boring, grooving, turn...
Socket facing,turning and grooving operation in CNC machine
• Socket facing,turning ...
VMC programming in hindi || G85 boring cycle in vmc milling machine
• VMC programming in hin...
CNC VMC TECHNOLOGY CHANNEL URL
/ @cncvmctechnology
setting work offset on cnc milling machine vmc
• VMC programming || se...
Work offset by edge finder tool and reference tool
• cnc programming || Wor...
G75 grooving cycle in CNC machine
• cnc programming || G75...
constant surface speed g code, G50,G92,G96,G97
• cnc programming || con...
setting work offset on cnc milling machine vmc
• VMC programming || se...
G54, G55, G56 WORK OFFSET SETTING IN VMC
• cnc programming || wor...
G43,G44,G49 tool length compensation in VMC machine
• cnc programming||G43,G...
Sub program calling in vmc machine
• VMC programming||Sub p...
Ball pin roughfing with canned cycle G71
• cnc programming||Ball ...
G70, G71 canned cycle for turning and finishing
• cnc programming || G70...
G32/G33 thread cutting in CNC lathe machine
• cnc programming || G32...
G94 facing rough cycle
• cnc programming ||vG94...
Tool nose radius compensation G40,G41,G42
• cnc programming || Too...
CNC program G02,G03
• cnc programming || G02...
Tool tip orientation in CNC machine
• Tool tip orientation i...
how to write first cnc program
• how to write first cnc...
G- CODES FOR CNC LATHE MACHINE
• G- CODES FOR CNC LATHE...
how to set work offset in cnc leath machine
• how to set work offset...
G81,G84 DRILLING AND RIGID TAPPING CYCLE
• G81,G84 DRILLING AND R...
G81, G83 PECK DRILLING
• G81, G83 PECK DRILLING...
G81 Drilling cycle || G81 canned cycle || G82 spot dilling
• VMC programming in hin...
SHANK TURNING OPERATION( ROUGH AND FINISH)
• Shank turning rough an...

Опубликовано:

17 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 128

@kamlakartelange8693 2 года назад

Amazing video sir really thanks

@tradebrain3254 Год назад

Sir! One of the best Topic and VMC program A to Z short and sweet explanation 🙏✨

@CNCVMCTECHNOLOGY Год назад

thanks dear please share with all your friends which one relate to cnc vmc

@tradebrain3254 Год назад

Yes! 🙏

@arvindkumardehariya8703 4 года назад

Thank you sir, nice video all help full.

@skjahedmalida7232 2 года назад

Good video dada... Carry on with mill program

@Vansh_gaming_1239 2 года назад

Thank you so much sir

@arumugaveluk9063 4 года назад

Thank you sir good lesson

@akshaykumarbadiger4287 4 года назад

sir kousa soft where ap use karaheho

@pratapsinhzala4875 4 года назад

Nice program sir thanks

@HARJINDERSINGH-de1ic Год назад

Sir agar taper 35 ki jaga 20 ho to usy kaisy calculate krygy...pls rply sir🙏

@ranakumar3339 Месяц назад

Thank you sir

@RakeshKumar-cr5wg 5 лет назад

Good topic helpful information

@CNCVMCTECHNOLOGY 5 лет назад

Thanks

@varunthapa6442 5 лет назад

Thanks sir for this lesson

@CNCVMCTECHNOLOGY 5 лет назад

thanks varun, please subscribe and share

@GAHLAUTHIMANSHU 3 года назад

Great good.

@kiranawholesale548 7 месяцев назад

Sir which software you are using?

@patelvatsal5270 4 года назад

Jo last me 3D software dikhaya hai vo konsa hai

@user-so3un1dk8w 10 месяцев назад

Sir required taper kase bane ge please.?

@khatritech9589 3 года назад

Nice one

@BabluYadav-ek2is 4 года назад

We salute you sir

@CNCVMCTECHNOLOGY 4 года назад

Thanks

@cibinmatthew3165 4 года назад

But sir degree kaise calculate karte hai

@keharisinghbaghel5104 4 года назад

Sir agar endmill ka dia 20mm hota to ham x ki value kya likhte

@TechnicalRajibMallick 4 года назад

Thank you sir, a valuable information, but I'm not confrm, fist I will apply in machine, then I will gave my feedback. Once again thank you sir🙏🙏🙏🙏

@TechnicalRajibMallick 4 года назад

Ok sir its working. Thank u

@rohitmore9759 5 лет назад

sir bahut badiya

@CNCVMCTECHNOLOGY 5 лет назад

Thanks dear

@ramramsonalika7174 3 года назад

Sir End ka crdinet kahapardale

@sunilgupta6398 4 года назад

Sir L jo dalte h kyu dalte h esko calculate kaise karte h plz sir ans

@tapankumarswain1740 2 месяца назад

Cutter kounsa laga ne ka he

@arjundas708 2 года назад

Good job, sir how to avoid cutter steps to get smooth finish

@ranakumar3339 Месяц назад

Sir taper pocket ka video banay sir ji

@bhaveshkembari9404 4 года назад

Hi sir, Circular taper milling operation ka vedio banahi na sir plz

@CNCVMCTECHNOLOGY 4 года назад

Jarur banaunga, abhi vmc ka suru kiya hai, sare operation pe video banaunga, actually me bhi service karta hun time kam milta hai

@santoshnehe829 2 года назад

Sir, pura operation hone ke bad X axis me 50 mm ka cutting huva hoga

@saxophonesongs6944 3 года назад

Pl send videoes for taper radius milling With canned cycle

@manishmhatre5096 2 года назад

sir, Tapper circle kaise banaye vmc pr, Tapper Circuller program

@rajusaroj9457 3 года назад

Draf me program kaise bmega sir

@hirenprajapati5629 3 года назад

Sir endmill back flute would be capable to begin with 25 mm depth??

@CNCVMCTECHNOLOGY 3 года назад

Yes

@hirendrakumarchhotu8641 3 года назад

Sir ek video vmc me cutter se banane ki or cutter gruv cutter ka off set kese or kha let's h sir plz sir eska samjh nhi aata h

@VanshMRajput 2 года назад

Sir x ka calculate samjav samaj nahi aaya. 25 bar ripit karega to kuch is tarah se hoga na 25X2 = x50 hoga na means k ke x me 35 hai to 50 aaya yaar kese

@mohammedmahin3401 4 года назад

Sir I want to learn cnc manual programs.and I'm interested to learn fastly...pls teach all types of settings,programs...thanku....

@CNCVMCTECHNOLOGY 4 года назад

Watch one by one my videos

@anthonikujur9360 3 года назад

Sir if 45 degree or 75 degree diyaho ta how to make a program please give the answer

@CNCVMCTECHNOLOGY 3 года назад

Already uploaded video for angle

@ajaymaurya2896 3 года назад

Sir mai ak program simulator software me daal k chalaya hu ab usko pendrive me kaise copy karu 🙏🙏🙏 Please help soon🙏🙏🙏🙏

@CNCVMCTECHNOLOGY 3 года назад

Us program ko save as karo, text file banengi

@prashanthm1990 3 года назад

Sir ek bar 2d helical ramp interpolation program explain sir

@panakjkumar7308 3 года назад

Sir 50 baar hamaraa tool run hogaa to lenth jo hume 35 chahiye boh to 50 se be jayadaa bnegi is tarah to agar 1 mm kaa cut use krty hai too

@khushhire2938 2 года назад

Sahi bola bhai

@vilaschavan4472 5 лет назад

Nice sir

@CNCVMCTECHNOLOGY 5 лет назад

thanks vilas

@kirandaphal5808 Год назад

Software konsa hai... Mai bhi Aise practice karana chahata hu

@CNCVMCTECHNOLOGY Год назад

Swansoft

@ArunKumar-re1zy 4 года назад

helloo sir sir isi taper milling ko agar Interpolation me chalana hota to i.e curve milling karni ho to pls uska syntax bta do..

@CNCVMCTECHNOLOGY 4 года назад

X or y ki dimensions har step me radios ke sath g02 ya g03 operation se kar kar sakte ho

@GAHLAUTHIMANSHU 3 года назад

Sub programs me machine repeat kaise karti hai ek hi program ko . I mean ki machine kaise read karti hai ki har bar 0.5 up hone ke baad pahle X aur phir Y me travel karna hai plzz detail me explain kijiye

@CNCVMCTECHNOLOGY 3 года назад

Sub program alag cheez hai, or coordinate repeatation alag cheez hai

@vinayakbadiger5454 3 года назад

Sir in sub program.... after G91.....we have to take z up first by 0.5......then X should be shift by 1 mm......other wise it will directly shift in X first...and then z .... means material taper will no happen properly

@vinayakbadiger5454 3 года назад

Sir I am write or not

@RakeshKumar-ke6iq 5 лет назад

Super sir jee, very nice.

@CNCVMCTECHNOLOGY 5 лет назад

Thanks dear Rakesh, please share

@cibinmatthew3165 4 года назад

45 degree use ho raha hai with the help trigonometry

@balkishanyadav2487 4 года назад

Sir main program kahi bhi rahega machine me usko le lega

@CNCVMCTECHNOLOGY 4 года назад

Han ji

@cibinmatthew3165 5 лет назад

Sir degree aur angle kaise calculate karte hai aur use kaise karte hai program may

@CNCVMCTECHNOLOGY 5 лет назад

Mene pahle se video upload kar rakha hai, aap play list me ja ke dekh sakte hain

@arvindkumardehariya8703 4 года назад

Dear sir, Please share ID conical program top dia.-200mm , bottom dia.-100mm & depth 50mm. please any solution this problem.

@CNCVMCTECHNOLOGY 4 года назад

You can do it your self, only change x and y coordinate, top to bottom reduce size x and y axis and I and j value decrease

@arvindkumardehariya8703 4 года назад

Dear sir, tapper milling according any short cut subprogram. x and y axis reduce but process long program. please any short subprogram shear.

@kaushalkumarkaushalkumar5995 5 лет назад

sir rectangle me offset vmc par keshe lete h ya siladi part ke taehe lete h

@CNCVMCTECHNOLOGY 5 лет назад

Part ke kisi bhi corners pe le sakte ho

@panchananmaharana2182 5 лет назад

Sir ,2cut Mai Kitna material Kata

@CNCVMCTECHNOLOGY 5 лет назад

Ek baar y me travel karta hai to 1 mm fir x me 1 mm ka increment hai to 1 mm or aage badega ek puri cycle me 2 mm or 2 baar me 4 mm.

@mukeshrao3293 4 года назад

Sir id me tapere bor ka program kaise banate

@CNCVMCTECHNOLOGY 4 года назад

I will upload soon

@Kamal-mq8wq 3 года назад

Finishing kese aayegi ye bataiye

@CNCVMCTECHNOLOGY 3 года назад

Finishing ke liye aap tolerance ke according end mill ya remer use kar sakte hain

@mithunchauhan4959 3 года назад

X1. 0 nd Z0. 5 ye kaise calculate kiya aapne iski calculation ka method btao mujhe aap. Agr X me 6mm aur Z me 8 mm travel krna h tb kaise calculate krenge X Aur Z ko

@CNCVMCTECHNOLOGY 3 года назад

Watch once again , you will get it.

@santoshsinha9736 5 лет назад

Haas me ye program chalega

@CNCVMCTECHNOLOGY 5 лет назад

Yes,

@technologyhacker3193 Год назад

Bhai z- se chalaya hai tool larega nehi

@CNCVMCTECHNOLOGY Год назад

@alokpandey14429 2 года назад

X and z ka value kise nikale taper ke liye

@sksingh2798 Год назад

Orazin ko rid katda hai

@sewgulve3342 3 года назад

25*1pura material milega cuttre tutega

@CNCVMCTECHNOLOGY 3 года назад

I teaching only concept, tricks and tips, you can adjust it according to cutter and materials and machine.

@cibinmatthew3165 4 года назад

Titan engineering

@patelvatsal5270 4 года назад

A to B 35mm kaise jayega

@pradipkamilya5882 3 года назад

Machine mey run karke bath bolo..

@deepika7161 4 года назад

Sir please one mm by one mm cut making program

@CNCVMCTECHNOLOGY 4 года назад

Deepika chane the coordinate only 0.05 to 1mm, otherwise programme will be same

@akashkadam9683 4 года назад

Sir taper cut to hoga lekin surface pe pura .5 ka step -step aayega. To kya khaya?

@akashkadam9683 4 года назад

To kya phayada

@CNCVMCTECHNOLOGY 4 года назад

Uske liye aap cut chote kar sakte hain, ya fir ball nose radius tool use kar sakte hain

@indian6828 5 лет назад

Bro u r program How to achieve surface finish.what do to.

@CNCVMCTECHNOLOGY 5 лет назад

Surface finish you can maintain according to your requirement, I teaching only techniques, how to mill in tapper.

@ratneshkumar8412 2 года назад

He'll

@rameshwarpawar9615 4 года назад

Yeh swansoft simulator software hai Kya????

@CNCVMCTECHNOLOGY 4 года назад

Yes

@rameshwarpawar9615 4 года назад

@@CNCVMCTECHNOLOGY to use app ko turning se milling kaise Kare.

@CNCVMCTECHNOLOGY 4 года назад

@@rameshwarpawar9615 change control system

@deepika7161 4 года назад

Cut to cut program makeing

@sujitchoudhari3248 2 года назад

X me 50mm ho raha hai

@sujitchoudhari3248 2 года назад

Apke program se

@alokpandey14429 2 года назад

Koi formula h to do

@nareshmore3093 5 лет назад

Vmc ka Ditel program batav

@sksingh2798 Год назад

Aapko vmc me kya Janna hai

@RakeshKumar-cr5wg 5 лет назад

Siemens me fanuc program kaise chala sakate hai

@CNCVMCTECHNOLOGY 5 лет назад

Same program hi chalta hai sabme, me ek video upload karunga

@saurabhpatel7180 4 года назад

Good morning sir i am from Gujarat and I hed just join in one company as a vmc operator but before few days ago our programmer has live the job and now I am alone on machne as I am not programmers but company is giving me daily new work to do on machine with program so in few case I make program but in few case I even don't even know how to make program of this components so can u help me like can u give me your whatsup number so I need your help our machine is m80 mistubishi model new machine thanks sir wating for your reply

@CNCVMCTECHNOLOGY 4 года назад

7082004417

@sujitchoudhari3248 2 года назад

Reply sir

@rushikeshdeshmukh6574 2 года назад

P 25 Z 0.5 shift hota he yani 25 mm upar ata he Pr x 1 mm shift hota he yani o 50 mm shift ho raha he Pr hame to sirf 35 mm hi jana he

@rushikeshdeshmukh6574 2 года назад

Or usme to step bhi rahega

@pragneshpatel2346 4 года назад

aap class chalate he

@CNCVMCTECHNOLOGY 4 года назад

No dear

@milanmech8281 2 года назад

X value galat hai 50 path hua 1 mm ke hisab se x mai 47.5 ho gaya or drawing mai sirf 35 mm tak hi jana tha wrong machining hua a tapper digree galat hai plz sahi se sikhau logo ko 🙏

@manojmahor6076 4 года назад

Sorry sir sub program me Y-50 galt kiya hai Usme Y-5 krna hai

@amansimbharwalrohtak2258 2 года назад

App ka mobile number Kay ha sir ji

@AjayKumar-mw3st 4 года назад

Thanks sir

@raviprakashpandey226 4 года назад

Sir x 2mm travel krta h to yK cycle me to 25 cycle me 50 bar travel krega

@CNCVMCTECHNOLOGY 4 года назад

X me sirf 1 mm ka travel diya hai, watch once again

@suniltanwar8458 2 года назад

@@CNCVMCTECHNOLOGY sir z me Aapne 0.5 Ka cut Diya or tool chalaya 50 Baar Uske Saath Saath Aapne tool ko hr Baar 1 mm shift Kiya to X me 50 mm material cut Gaya jabki hamane X me 35 mm Jana tha sir X or z Ka calculation thik Nahi hua es parkaar to hamaari taper degree Sahi Nahi hogi