TBS Lucid Flight Controller - AM32 ESC & Source 1 Frame Kit- Let's Tackle The Gorilla 

respect.

Out of stock. You suck TBS 👎

I have some older TBS Drones they sold, the TBS Vendetta and the TBS Oblivion. They both have the TBS Powercube 6s plus the FPVision Board its called that has the PDB on it and a TBS Unify VTX built-in to the FPVision board which is the bottom board. Theres a really nice multi-pin connector to add each PCB Board layer on top. So then you add each individual ESC Boards, 4 of them lol, then the FC on top which is the COLIBRI_RACE F3 Flight Controller. The Flight controller was made for the TBS Powercube setup because it had the thru-pins in it as well. So each ESC Board, FPV/VTX Board, and FC Board have no wires connecting them and each ESC is rated for 50A and they each have little Cap's built-into the design. They fly great and both have 4s motor setups, but i think one day i will try them with 6s rated motors. The F3 FC honestly flies fine with the older version of Betaflight already on it and it was professionally tuned before i bought all of the stuff from someone. I also got a Tango 2 with it because the Colibri FC had the mount for the Nano RX and a plug in for the Micro RX. So it had Crossfire even way back then in 2016-2018/9. My Tango 2 had the V1 PCB in it when I got it which the guy at TBS said was only on the first pre-order batch for about a month. So it was an original until i went to the V3 PCB for the 1W power. I love flying the TBS Vendetta, but i broke one arm, and since it has that quick-change arm design where it has a XT30-3 Pin for the motors where the arms meet the Frame. So no resoldering if you broke something like a motor, you could have spare arms made up with motors and plugs already to swap on, which was a pretty cool idea.. However they seem to be discontinued now and I only have one extra arm for it so i figured id only fly it once and awhile lol. I have other drones and its just too cool to ruin it lol.. The TBS Oblivion is like a big avata without the ducts basically, idk what you would call that. Its a completely plastic design with reinforments and it feels nice and strong and it can take some hits with the tiny whoop style canopy design.. Its got some speed to it too with the shape and light weight. I was thinking of switching that from the 4s motors to some power 6s motors and see how fast i can get it lol. I know those ESC's can handle it, i just dont know if i will be able to get the TBS GPS to work, i tried once and it just didnt add anything to the OSD, which is a TBS OSD, which you really cant get a BF OSD to work with its weird.. But yeah everything they make has always literally been top quality, even the accessories are always nice and well designed and well priced as well. I love my Tango 2 still as well and i only use my other TX for my ELRS drone's.

I'd bet money that the vias they are using can carry more current than castellations.

@@ddegn I tent to solder my motor wires vertically to the castellations. I route them around the stack screw beneath the ESC, then bend 90 degrees vertically up into the castellation and solder there.

@@timlong7289 Interesting. Thanks.

Yea I also like this approach.

hopefully they make tango 3

​@@WegaFPV let's hope not.

yep the arms are not in the right orientation ;)

@@chrisfpv5706 there not enough friction sandwiching arms they move and pivot on m3's as holes are too big. No matter how tight. I went to 10.9 cap heads and really cranked guess what still loose. I need up binding plates with a little dab or polyurethane adhesive. Frames garbage period

once you go black, you never go back ;)

@@TeamBlackSheepFPV 😆

I triggered on that too.

LFG

it's pretty tough to cut these without causing some kind of jagged edges, the copper and PCB is so heavy duty. we did get a knife so it's a bit better now than before :)

It's not particularly unusual hens why I never mentioned it. A quick sand will always make it look better but I would not hold it against them. Even DJI O3 camera PCB has the same.

I love my source one v5...I have 2 I only wish the arms were quick change

​​@@Krash_fpv Amen to that

or just do 5in1 30mm, and y r there so few at32?

Not if it's made in China you won't

Ifixit tool kit. They have many.

Agreed 100%. Those battery pads on the esc are so close to the mount it is terrible design. Overcomplicated stuff from tbs as always.

Neither should the carbon frames.