TDA 7293 VS TDA 7294 VS 2SC5200+2SC1943 SOUND TEST

Подписаться 2,1 тыс.

Просмотров 25 тыс.

50% 1

IN THIS VIDEO I WILL COMPARE THE SOUND OUTPUT OF THREE CLASS AB AMP BOARD.
1. TDA 7294 - GIVES 100WATT AT LOW THD ON A 4 OHM LOAD.
- CAN DRIVE 8 OHM LOAD WITH BRIDGE CONFIGURATION.
- DOES GET HEAT UP QUICKLY(USE A GOOD SIZE HEAT SINK)
2. TDA 7293 - GIVES 80 WATTS AT LOW THD ON A 8 OHM LOAD
-
3. 2SC5200+2SA1943
- CAN EASILY DRIVE BOTH 4 AND 8 OHM LOAD AT 150 WATT
- LESS HEATING COMPARED TO BOTH TDA ICS
- EXTREMELY LOW THD AT HIGHER VOLUME COMPARED TO BOTH TDA CHIPS.
Amplifier boards used in all my videos are Ampliton amplifiers. Link below :
2x2sc5200 & 2x2sa1943 400W Mono Amplifier Board with Tone Controller: amzn.to/2TtqThZ
TDA 7293x3 Mono Amplifier Board(300WATT): amzn.to/2ZPJ2uN
TDA 7294 Mono Amplifier Board(100WATT): amzn.to/2vFNcbA
2sc5200 & 2sa1943 Mono Amplifier Board (150WATT): amzn.to/2P3lwUV
30Watt Sterero Amplifier Board: amzn.to/36J8e9R
Tone Control board: amzn.to/34y262x
Follow my Instagram accounts :
/ mohantymakes
/ ampliton

Наука

Опубликовано:

25 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@sujitchakraborty2623 4 года назад

disgusting, there is no meaning of this comparison without heat-sink, also 15-0-15 is not adequate voltage to run such kits, lastly without speaker enclosure proper sound cant be produced.

@vazio3760 2 года назад

Tda 7293 winner !!

@Naresh76116 4 года назад

Good comparison sir

@MohantyMakes 4 года назад

thanks

@GeoBass-89 4 года назад

Fake info.. All amplifier work on 4ohm and 8ohm load, Tda7293 is work on high supply than 7294 and you don't use heatsink dude !! Tda7294 at +-25vdc is monster with 4 ohm load. and maybe you have extra gain on transistor amplifier

@games4life743 4 года назад

I dont understand the 15-0-15? Can you show me how to power the tda7293

@MohantyMakes 4 года назад

that's the split power supply value.7293 amp board requires a split power supply.like 24-0-24 volt dc.you can use a center tap transformer with split supply voltage from 18-0-18 volt dc to 35-0-35 volt dc.

@4211Rob 7 месяцев назад

2sc5200 and 2sc1943 sounds best to me in this situation

@user-ou1es1jt1t 2 года назад

Як можна тестувати, без радіатора? Максимальну гучність недасиш

@joeopilas52 4 года назад

you cannot listen to a good sound if your speaker is not on a box and you don't have a high frequency driver.

@maha9782 4 года назад

Tda7294 board how many inch subwoofer connect pannalam bro

@MohantyMakes 4 года назад

6 to 12 inch speaker can be connected.

@bhaibhai-qp6fh 4 года назад

Which one will you recomend considering bass,quality.

@MohantyMakes 4 года назад

All three amp board has good bass quality.the main difference in bass quality comes at higher volume where the 2sc5200&2sa1943 amp clearly Excels.though for normal usage I recommend either 7294 or 7293 because they are a little cheap compared to 2sca5200 amp board.

@androidgamer6611 3 года назад

24 0 24 supply kaise. De

@BonniGyanesh 3 года назад

Bhai yeh teeno meeh sabse aacha rich bass kis meh hai

@MohantyMakes 3 года назад

5200 1943 for sound quality but tda 7293/4 is cheap.both produce great bass.

@newagegaga 4 года назад

No heat sink?

@MohantyMakes 4 года назад

heat sink is necessary for longer operation but in this video amp run for a minute at lower voltage just for sound test.tda 7293/94 do get heat up fast even at lower voltage but 2sc5200&1943 remain cool.

@aaaaaa-kc4fs 4 года назад

Which is the best...???

@MohantyMakes 4 года назад

5200 1943 transistor amp is the best choice if you want less distortion and power.

@bimalsarkar8730 2 года назад

Bass 5200/ 1943 Ok but hi mid bass TDA7293Ok

@dl1886 2 года назад

Looks like testing tweeter.

@MohantyMakes 2 года назад

it was a free air test.

@manthos.y 4 года назад

TDAs could easily be throttling in your vid. I'm running 4xTDA7293 2.1 amp at 47-0-47DC. You have no idea.

@MohantyMakes 4 года назад

they do throttle when they got hot at higher voltage.

@MohantyMakes 4 года назад

i also run my subs on a 6x7293 parallel mono amp and they produce some serious heat.

@motagee6200 4 года назад

Lisnig Test should be done at actul place not on RU-vid.. Mobiles can not Record HI_FI Sound.Na Nun Nuna .No hifi Test done this way.

@chatarramacanica8116 3 года назад

Un test muy poco serio.

@arvin1913 3 года назад

Dude, your technical knowledge needs a refresher basic electronics course. Use heatsink for high power amps. And if really want to compare sound quality then use speaker enclosure.

@MohantyMakes 3 года назад

this was a short sound test at very low voltage and amp so no need for heat sink but at higher voltage they definitely require a heat sink.those TDA ics gets real hot real fast.