Tech Tips: SCG's Tune Up Kit Nuova Simonelli Oscar & Musica

Подписаться 690 тыс.

Просмотров 45 тыс.

50% 1

Regular maintenance is key to keeping your espresso machine in good shape. Replacing your brew head gasket and screen for your Nuova Simonelli Oscar and Musica may seem challenging, but as this video shows it's as simple as removing a screw and pulling out the gasket. It is recommended to change your gasket and screen about every three or four descales.
For more information on SCG's Tune Up Kit for the Nuova Simonelli Oscar & Musica please visit our website:
www.seattlecoff...

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@bucklava1 10 лет назад

Brendon always does a great job with maintenance and tune up vids.

@StankLip 10 лет назад

Great video! I almost got the Oscar but ended up with a different machine.

@lowcomdenom 10 лет назад

Excellent video.

@Emerald13 10 лет назад

Thank you for the video.

@67massimino 5 лет назад

fantastic..tanks you very very very...mutch!!

@randyburton511 4 года назад

Any tutorials on replacing the pump?

@SnipetsofTime 10 лет назад

I'm glad you guys made a vid for this! This video was very well made and I am warming up to the new format of the vid. Brendon always does a fine job when it comes to showing us how do do tune ups. Is there any possible way you guys can make a tune up vid for the rocket machines? I plan on buying one at the end of the year.

@SeattleCoffeeGear 10 лет назад

We are hoping to shoot an E61 group head tune up video soon! It should be up in a week or so. - Steven

@SnipetsofTime 10 лет назад

Seattle Coffee Gear Another thing too, I just found out through your site that the rocket giotto V3 came out. Are you guys doing a crew review by any chance comparing it to the V2? Thanks

@SeattleCoffeeGear 10 лет назад

***** Yes, we should have a review early next week. The difference between the V2 and V3 is that the V3 has a brand new PID. Everything else inside the machine is the same. - Steven

@latinajitacoffeeco. 6 лет назад

excelent tutorial, thanks!

@KRuth54 6 лет назад

Awesome video. It helped us replace the gasket. Wondering what type of awl you used as I cannot seem to find one online that looks like yours.

@kukubeta 2 года назад

pls can answer me some1 i m useing breville bes870 about 7 years and its cofee range not enough for me. and my friend selling his oscar . should i buy it ? is it a downgrade or upgrade for me.

@saramack1739 7 лет назад

Great video, thanks SGC! So there is no issue flipping the machine upside down when the boiler is full of water? My gasket is hard (oops) so I'm going to need all the access I can get.

@KrisPucci 3 года назад

What is the best way to clean the brew head (at 4:00)? Is steel wool (i.e. SOS pad) a bad idea?

@bengregoire4362 3 года назад

my group head looks nothing like this, I'm super confused. Mine's like a double metal ring with only one hole, right in the center. The outer ring kind of pushes in?

@Heieneken86 7 лет назад

if the gasket isn't sitting all the way in, wouldn't locking in the portafilter help seat it?

@user-wt7yu1ug4k 4 года назад

Good afternoon. Can you help me? I want to install on the coffee machine Nuova Simonelli Oskar L Manometer for the group (wedge 9Bar). Tell me please what kind of parts are needed per other manometer

@taramurff2647 3 года назад

Very helpful video. thanks. But we had a heck of a time trying to open our screw for the brew head screen! Unsuccessful. even tried using Wd40..... still didn't work. any recommendations? Luckily able to get the gasket out despite not being able to open the brew head screen. But would very much like to change the screen as well.... and have to opportunity to clean the brass difusser. Any suggestions on the tough screw?

@coffeemaniac571 3 года назад

If nothing else works (this was the case for me), use a tool to lever the edges of the screen off the diffuser plater. Use pliers to rotate the (now bent) screen counterclockwise, this was sufficient in my case to loosen the screw. Before you start this, make sure you have a new screen ready. I also replaced the screw with a stainless countersunk hex drive screw.

@KrisPucci 3 года назад

I have the same problem. I cannot get the screw off. Did you eventually manage?

@blueraven32 4 года назад

Btw my Oscar is doing watery coffee and does an espresso shot under 8 sec , do you have any tips for me ? it was fine until I brought it for repair!

@turonggos 4 года назад

I have problem with the musica and it cannot extraction. Is there any problem with head gasket, or any another issue that i have to consider ?

@mtber1988 10 лет назад

On the subject of descaling, have you found an easy way to do it with the Oscar yet seeing as there's no hot water spout?

@SeattleCoffeeGear 10 лет назад

Unfortunately descaling on the Oscar is pretty difficult. With this particular type of heat exchanger boiler it's very easy to leave descale solution behind in the boiler. This is why we recommend that you get your Oscar descaled at an Nuova certified service - Brendan

@MrHendrup 10 лет назад

Dear Seattle Coffee Gear, would you please post a video on how to replace the manometer on a Rocket espresso machine? Thanks a lot!! :)

@SeattleCoffeeGear 10 лет назад

You mean the pressure gauges on the front? We can put it on our list of videos to shoot! - Steven

@MrHendrup 10 лет назад

Seattle Coffee Gear Hi Steven, yes thats exactly what i mean, best regards Kasper

@blueraven32 4 года назад

We dont need to empty the boiler?

@cheeweitay3319 10 лет назад

Hey there, I bought a nuova simonelli maintenance kit from SCG recently and I'm having a lot of trouble removing the screw from the machine from my Musica... partly coz the video said i'm not supposed to flip the musica upside down. Would it be safe to at least flip the musica sideways?

@SeattleCoffeeGear 10 лет назад

It is not safe to flip the machine in anyway. If you flip the machine all the water in the boiler could potentially spill out. We recommend having the machine at the edge of your counter/table and working from under the machine in that way. Hope this helps. - Steven

@nassanyassin 4 года назад

I just replaced the rubber gasket in my Oscar I, but I can't get a "6pm" angle once I place the portafilter. Is fits more like at "4pm" angle. please help..