Learn some of the common mistakes people make, and how to fix them if your SC450 brushless speed control is not working in your RTR vehicle. Visit our website: www.Associated...
I just got my self two of these Nylint 1/6 Scorpion Radio Controlled yellow Jeeps brand new in the box. Unfortunately both are not working i charged the batteries i put bran new 9v battery in the remotes but i can not get them to work at all. Both remotes turn on but i can not get any commands to work nothing is responding even i changed the channels still no respond what so ever its driving me crazy they are brand new. Does any body know whats going on here please? any tips to fix them will help.
Hey guys, so my reverse wasn’t working either and I just stopped at step two of this process. I didn’t go all the way to the end like he did because he said he went three rounds. I hope you understand what I mean. Anyway, just go ahead and cycle through it and then turn off the ESC. Wait about a few seconds then turn it back on. Try and see if it works. I hope this helps. If you would like, I will do a video on this.
I bought new esc and motor. When I program the ecs. It won't go in right order. It say give , hit set but for neutral, that work but it won't for forward throttle, but will for reverse throttle then it will for forward, but now its faster in reverse than forward. It just won't program in right sequence
I got a sc450-bl and reedy 3300kv motor from a friend and it does not beep, is it still going to work, it runs through all of the setup steps, with the red light and green flashes etc.... but with no beeps? I have a bad motor, reedy 3300kv and its not turning, going to order tomorrow for 50 bucks but is it still worth doing, I already bought a Lipo battery today and i just found out about the motor from the hobby shop so???......???
Look at your remote control and try to find little switches that have the numbers 123 possibly 4 under them. One usually controls the steering, and the number two usually controls forward motion. Click those up or down and see which setting works for you.
@@SomethingMobile I got a cheap “hobby grade” rc and has the typical receiver with ESC integrated and for some reason when i pull the trigger and stop it it keeps running by itself, any help?
I bought a remote control model number 9125 ipx4 waterproof 46 + km miles per hour four wheel drive monster truck I tried to pair them together and now the receiver on the truck is blinking red and I have no steering or throttle will not move I think it's lost it's bind from the transmitter is 24 GHz digital proportional RC system transmitter would you know how to rebind that any help would be very appreciated I'm just getting into this and got the car from eBay and I was excited I felt like a at Christmas now I can't get it to pair really sucks about ready to return it but like the truck would you know how to rebind them and that would be appreciated thank you
I’m not a professional at this, but I just noticed cause I was trying to bind my controller as well. Maybe this will help. I don’t know what the little box is called that the servo and ESC wires plug into. But that’s the box I’m talking about. That box should have a little red button on it or some sort of button at the top that you can press and hold to get into binding mode. your controller should have a binding button as well. After you pushed on the little button that is in your truck to get that into pairing mode. And you pressed the controller to get it into pairing mode also. They should pair. Sometimes it takes 8 to 10 seconds. If it doesn’t work, then turn it off and start over again. That’s for the directions told me and it worked. I hope this helps.
I have a Hudson original 109 brushless no camera no nothing no features no anything free flyer I had one ESC that went out I guess so I order the part and now. All of a sudden I've got two Motors or two sc8 ESC that won't work on the front how do I know if it's the motor or the ESC please help,And weres the fastest place to get esc's
My esc worked after this video but after a few mins I turned it off then back on and it didn’t work. I think the first time it was just luck. Does this work for all cars?
I have a traxxas xl 5 hv 3s esc I got a traxxas trx 4 Land Rover from a friend that he ran lipos in it I run nimh in my cars so when I tried to switch off the low voltage warning feature to get it In nimh mode the truck runs but only for about a minute before the truck stops and can’t get it to move anymore the nimh battery is fully charged the steering works fine just doesn’t move anymore we both tried resetting/ recalibrating and it and it continues to just run for a minute then stops so could it be that the esc is going bad ? Because I’ve seen him drive it often he never had issues with it he gave it to me when he upgraded to another truck it just refuses to work on my nimh batteries sure I could just use a lipo but I’m not a fan of those because of all the precautions u have to take but with nimh u just plug it in and forget it till it’s done charging and not have to worry about battery catching fire or exploding so what u suggest get a new one different brand perhaps? Or a nimh only esc ?