Good video with nice comparison. I was recommended to change my nMax rollers to 9g and now it's much more responsive and efficient in usual commuting speed of 70-90kph. Stock 14g felt very lazy and could not accelerate up hills 😅
Hi Banco i would recommend you to increase the pitch from the shasman but i don't know about the heavy adore bigger pitch or the centrifugal for example in PCX I have removed the stops from 110 112 to 130 km m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H1o8aWGsuzE.html
I have the 2018 model in 125cc, frankly very nice machine, but I wanted to have more acceleration and top speed, which ball do you recommend, I want the scooter to be more responsive and have a top speed. Thank you for coming back and very nice video ❤️
as for the higher speed, you can remove the stops from your variant, I made a video how to do it, as for its power, I'm sorry, but the 125 doesn't have as much power as the 150, just if you put a camshaft, an exhaust and the Jackson 34 or 35, it will go a long way good!
Good morning, great video, I've been following you for several months and your advice is very technical. I'm writing to you from Italy and I'd like to ask you a question, I have a Honda Pcx 125 2023 (Euro 5), I replaced all the parts with Malossi products: Clutch, Kevlar belt, Reinforced clutch bell and variator with 10.5 gr rollers and white contrast spring, supplied by Malossi, i have original exhaust. But unfortunately the scooter doesn't go more than 110 km/h, having reached its maximum speed, the scooter slows down to 104/106 km/h continuing to remain accelerated, how can I improve the maximum speed without losing acceleration? I tried the 10 gr rollers and it has more acceleration but losing something of the maximum speed. The 11 gr rollers lose speed and also recovery. The 10.5 gr rollers are the ones that satisfied me the most Do you recommend I put on 9.5 gr Dr Pulley sliders to improve speed without losing acceleration?, if I'm not mistaken the original weights are 17.5 gr, right? P.s. the scooter has 5200 km, regular maintenance, engine oil and gear oil always replaced regularly, spark plug and air filter clean Thanks
first of all, I didn't like it from the beginning, I tried it on a few scooters and I don't like it at all, I'm a fan of Polini a lot, it's in Italy, it's made in Italy, first I would send you to remove the stops from the factory variator you will see more acceleration if you go now with 110 you will go as low as 135 with the factory ones that remove the stops I believe you will be happy
@@MBPATENTS Thanks for the reply, I appreciate the technical explanations, but I have another question, if I keep the Malossi variator can't I increase the speed? Do I have to put the original variator back and then how do I remove the stops from the original one? Thanks
Hi friend. What is the size of the rollers on the honda pcx 125 2021? I can't find info on the internet. And what weight would you recommend for dr.pulley? I don't want 10 grams because it is very high fuel consumption. Respectfully.
Hey i juss bought POLINI VARIATOR AND NOW ITGOES TO 110 FINALLY BUT I USED AN OLD SPRING FOR CLUTCHING ALSO ROLLERS WITH 9 GRAMS WHICH WILL BE REPLACED WITH DIFFERENT WEIGHTS SOON ...... I WILL INSTALL A NEW SPRING THAT WAS IN THE SET . SO SEE YOU SOON WITH THE NEW SATISFYING RESULTS ........
+Reptiloid Павелитель всеx Земель и Миров I'm glad you got the variator, the spring is very good, if it is harder than yours, you will have a very good start, you will consume more gasoline, but it will be a good choice !!!!
@@MBPATENTS Ok WEL POLINI VARIATOR SEEMS TO BE GOOD BUT THE ORIGINAL SPRING SEEMS TO SOFTER THEN POLINI . WELL FIRST OF ALL WHAT ROLLERS SHOULD I USE FOR TO BOOST EVEN MORE ??? LIGHTER ???
Great video! I guess this would work as well in a Forza 125cc 2023, right? I am seriously thinking on buying one but I really need it to reach 110-115 km/h in an easy way and being able to matain it for long one hour. Thanks for the help.
Hi mario the lighter the balls the better the scooter accelerates i will send you another video for more speed m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H1o8aWGsuzE.html
What is the best flyball for acceleration based from your experience? I have a honda click 125i version and it has 15 grams stock flyball what is the best flyball weight that you can suggest to reach my top speed for a short period of time
You should check out on indonesia or thailands click 125i! (we have it named vario 125 here) and for me the best acceleration is on 9 grams buat the balanced of them all are on 11 ( i use 12 for fuel economy) also, we do some modification on the roller housings to port and remove the top end of it so the roller could move up a little bit more ( same as using sliding rollers but with normal ones) search it up! its called "kerok jalur pulley" and its done on every scooter here! Maybe since you are interested in acceleration you will be also interested to see about machining the primary pulley and the Fan degreee into 14° (honda's stock is 15° and yamaha's is 14° stock) Some like me does it to around 13,5-13,8 for better acceleration. Combine both and you get far better launch and better top speed at the same time!
hi bro , I have a few questions (l have 2018 all new pcx 125 and just change 13.5 rollers) 1.just change 10g rollers can 0-100 10sec? 2.This change can cause engine damage?
Hi bro in 10 seconds 11 yes you will catch them if you have an exhaust I say it in the description that the rollers 10 after 2-3 you stay creak the plastics the strap pulls hard the bearings will not suffer anything but you will see alo pcx!!! The 200cc you will pass them over :-)👀 will have political power
Hi ifan you have to find 6 washers corresponding to the grams that you want to put inside the studded balls support I will also make a video how to make the balls heavier
Hi, very informative video from you, may I ask is there any benefit when combining different rollers weight altogether? I'm planning to do the same thing with 3x 12g rollers and 3x 17gram rollers, I don't need the top speed that much but also don't want to balance fuel consumption as I'm told the lower your rollers are the more fuel it will use.
@@MBPATENTS thanks, this is the rarest case where I can find a honda pcx scooter with much information related to roller tunning and fuel cons. Though I don't have a pcx but I have an Airblade scooter which is quite similar to PCX so I can learn new things about the transmission. Thanks again and you've got a sub.
With the heavier one: more fuel economy and more torque, but less acceleration. With the lighter one: lower fuel economy, lower torque and greater acceleration. Is this correct?
Hi Lilyya With the lighter the billiards the better the starter the scooter also has and consumption is big. When it is heavy i billi i do not have a good star also it is very economical.
With billets 10 grams of dr p triangles I have 5 to 6 km more than 16g For more KM is this video m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H1o8aWGsuzE.html
@@MBPATENTS i think that with 10 grams of dr pulley and white malossi spring you will get a good acceleration and a maximum speed of 120 km + upgrade from the video for the variator 🙂
😄😄😄⚡⚡It would be like I was starting with 5g 6g billiards but I had a lot of wear on the imanda and centrifugal is not for very 2 3 days to keep them because then it has yeasts
@@MBPATENTS θα ηθελα να παρει λιγο παραπανο τελικη εχω πειραματιστει με μπιλιες και ελατηρια αλλα θα ηθελα να μου φιαξεις το φυγοκεντρικο να κερδισω μερικα χιλιομετρα τελικη.. αν μπορεις με το αζημειωτο βεβαια...
Hi Clark Fox This is a scooter, not a bicycle. The station has changed. The train doesn't pass through here. Bike mechanic, you are a very good craftsman, I admire you with what bikes, big or children's?