Testing The Most DANGEROUS Tool From Amazon! 

All of the dangers of a chainsaw with none of the safety features. Awesome!

6:53 that was an uncharacteristically long silence that I feel would normally be edited out lol

Chain Saw Art. Idk if it's common everywhere but thats the reason for the chainsaw grinder disks. So you can get smal intricate patterns and sharp little cuts, like a bear or an eagle made from a tall tree stump.

The chainsaw attachment is great gift for a person ya don't like. Killer piece of equipment. The disc chainsaw is for sculpting work; quick removal of large unwanted wood on the workpiece. Please put the handle back on before sculpting though, to keep yer body intact. Richard Down Unda.

When he mentions butter waring a toast shirt 😂

Both "chainsaw" options being suicidal garbage aside, the mounting problem is due to Milwaukee being the oddball out there when it comes to mounting the guard. Almost every other brand uses a clamping-ring system for that. (Some minor variations, but still...)

and 12 mins and 51 secs later yay we finally get a Cut.

Iv used one of those chain saw disc.. it’s not for cutting so much but more for sculpting. They are absolutely terrifying….

It's prob to put joint areas at corners of logs,for cabin makeing to make joint slots

“A guard , probably dont need that”

I don't usually do this but it is a chainsaw 😂

Next he needs a grinder attachment for his chainsaw

What's up Tyler the reason thst it cut faster is because the rpm on the grinder is much higher Edit: the chain is supposed be loose too loose would be it going over the bar just right is before it can slip

Put like a clamp or ubolt around the grinder

pretty sure the grinder blade one was meant for like drywall or something like that

There is also a circular saw attachment for this.

Lord this man needs help 😂

ash williams is smurking at this toy.

Next up: a grinder review, that way Tyler can get a new grinder and write it off as a business expense

The chainsaw blade grinding disc was extra terrifying in Tyler's hands. Those kick backs 💀

Man with experience of logging and been using chainsaws daily for years , you have made me incredibly scared for your well being !

Why wouldn't you just make notches on the brackets instead of cutting the angle grinder.

This was one of the first time I was genuinely concerned for Tyler's safety. That chainsaw grinding disc scared the crap outta me. Every time it kicked my heart skipped a beat, I was watching through my fingers like a horror movie. That thing is super dangerous and seriously should go straight in the garbage.

The black ring I think is supposed go between the clamp and grinder to dampen the vibrations

Tyler needs an adult around when he uses power tools lmao

This is probably the most anxiety I've felt during one of these videos. The chainsaw disc is so dangerous, I'm pretty sure it's outright illegal in a bunch of places, and you can very easily tell why in the video, it has a lot of kickback, one tiny mistake or slipup, and you'll find yourself with a disc embedded halfway through your forearm, stomach or leg. All I know is that even if it's not actually illegal and I'm confusing it, I've seen quite a few experienced woodworkers who treat that chainsaw disc like the plague, and you should probably too! Lol. Quick edit: I know grinder discs can be very dangerous as well, the difference is that regular discs are way more controllable, and in case of an accident, they'll just slice you up. The chainsaw not only has a lot of kickback, making it ridiculous to control, if you have an accident, it will literally chew up through your skin and get embedded, instead of just slicing. You can probably imagine why eviscerating your skin, muscle and even bone, and getting a disk stuck in it, is a lot worse than slicing with a normal disc.

1:03 "Some kind of metal thing" Allen key has left the chat. Never change Tyler lmao

You know you're in for a good time when he calls part of the chainsaw the "choppy part"

Always better to modify the cheaper of the two and not the other way around. Made many specialty tools out of cheap tools myself, which saves the expensive ones for warranty issues later.

The combination of Tyler and this contraption is like what you'd get if you ordered Leatherface off Wish.

Thank you sweet little baby Jesus for letting Tyler get thru this video with all his digits still attached and no gaping wounds 🙏🙏🙏

Now I've been known to do some questionably safe things... But these, these are absolutely horrifying.

I was so proud to see him put the safety guard on the chainsaw

One day those strings in your sweatpants you like to wear are going to get caught in one of your spinning tools and it won't be pretty.

Congrats! You made the most dangerous tool in most people's garage in to 2 of the most dangerous tools-in-one!

Ok so the grinding disc isn’t meant to cut, it’s a tool used for sculpting wood, and more precisely to remove a lot of material fast, you need to use it with the spare handle , and you use the same motions as when you clean up steel welds ! I hope it helps ppl understand it’s purpuce :)

This is a problem I have every single day thankfully someone found the answer to this daily headache

Yea the black rubber ring was to go in connection between the grinder and clamps. The "bracelet" he threw . Lol

You bought a smart angle grinder. It's got extra bumps and doodads that keep people from doing stupid things with it. An angle grinder is one of the most dangerous tools a layman can use. Never remove the guard and know what your discs are intended for. Edit: after watching the Dremel, I think I should change this comment to say, grinder discs in general are dangerous if you're not careful. They spin FAST. If they break, they shatter. When they shatter, they throw shrapnel very fast and the guard plus eye protection will usually protect you enough. Just imagine a shard of cutoff wheel disc flying off at 8000 rpm and embedding into your neck, cutting into an artery. That's how you gain appreciation for angle grinder safety

man i felt the pain of the grinder when tyler began to "modify" it

For the comparison I'd have to ask how old the proper chainsaw is, because it's blade may need sharpening

Hey, I don't know about you (well I guess I do lol) but I would much rather chop up the item that cost 30 or $40 versus the Milwaukee grinder that probably cost at least $100. You could have just notched the bracket and called it good.

That round "chainsaw" blade is basically for wood carving. I would have re-staked the teeth before using it. A flying tooth can ruin you, forever, depending on where it lands. I would also add some sort of guard. If your hand would slip down we could call you lefty.

How this man is still alive amazes me. To this day!!

Tyler, why oh why didn't you read the directions my man. You don't have to ruin your guard mounts. You just mount it at an angle which is why it came with the extra handle to hold steady. Never change, bud...

One day Tyler will accidentally invent the wheel.

Yes the black ring. Sometimes different angle grinders have different designs instead of modifying the angle grinder you need to redesign the bracket of the attachment in this case it is a chainsaw attachment

You genuinely put yourself in a lot of dangerous situations. That's not calling you out, it's why i'm subbed for quite a while now. Your ways of doing stuff will at some point lead to tragedy. But for real, live life to the fullest... 90 years are over pretty fast anyway. You made crappy days i had into very pleasant ones, so thank you for that and have a good one!

Your chainsaw blade is likely dull where the blade for the grinder is new!

Harbor freight just came out with an attachment like that for a circular saw. You should definitely try it.

Nothing sounds more exhilarating than a spinning blade that could vibrate loose at any moment

I like to imagine that Tyler never picks up the boxes and there’s an ever growing pile of cardboard on his garage floor

So hear me out, can the chainsaw stopping pants stop the grinder chainsaw?

Tyler, for fucks sake NEVER use a grinder without the handle and guard. N E V E R. What you did in this video would be a great training clip on what NOT TO DO with an angle grinder. You don't even know how dangerous that was. If somebody says that it gets in the way and you can't work with it on THEN YOU NEED AN OTHER TOOL. Just look up grinder accidents and what these tools are capable of and you'll know. I've had few close calls in my life taking all the necessary safety measures. Angle grinder is one of the most dangerous power tools there are in a shop. The only ones more dangerous than it are the table saw and band saw. Also never use gloves with rotating power tools cause instead of cutting off or nicking one finger it will either remove all the skin off of your hand, will crush and twist all the bones in your hand up to the wrist or just remove most of your fingers.

Tyler - “If I cut this part off the grinder I can’t add the guard back” Tyler 0.8 seconds later - “Check out this death wheel grinder blade”!!

That kit looks like a law suit waiting to happen

Idk how you haven’t gotten hurt messing with this stuff. I’m glad you haven’t but I’ve worked with chainsaws for a long time and the moment you get to comfortable it’ll get you somehow. Love your vids btw.

Just when you thought it couldn't get any scarier, Tyler playing with a chainsaw

Man, if you've always thought "what else can I do with a grinder", you will LOVE what Hydraulic Press Channel has cooked up on their second channel Beyond the Press. Knife blades - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jkoyg9h802s.html Saw blades - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qJEgi2tNJqI.html Spoons and brushes - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DkAq0P57NZA.html

Had to pause at the beginning made me laugh when you pulled out the instructions and said hmm I'll probably throw those away but I might need them 😂😂😂 so true of most "handymen" try first read instructions later 😂👌

Buys sketchy thing for his angle grinder, but not a sacrificial grinder

The saw disk is mainly used for roughing out wooden Bowls.

let me cut my good grinder instead of a 30$ accessory lol 👍

You could have cut a notch on the chainsaw adapter, not only you would gain the space for the screw shroud, but it would also function as a rotation stopper.

the disc with chain saw teeth is made for wood carving. and it also works great for pruning fingers. and those companies don't make chain saw adaptors for grinders, because they make chain saws.

Glad you wore protection for that chainsaw disc, bro. Stumpy Nubs, a popular woodworker on RU-vid, had a really bad accident with one of those and he did a whole video about how quickly they can just mangle a person. Be super careful with those! Great video, as always!

4k quality, I love it. Thank you for yet another entertaining upload!

I'm fascinated. It's like watching a car crash unfolding before your eyes. It's horrifying, but you just can't look away..... I have never seen so many self nominations for a Darwin Award, without success. I'm 63. I am compelled to subscribe. I have to see it happening! LOL. Greetings from Dimboola, in Victoria, Australia 🇦🇺.

Tyler, you should put to the test the things you get from Manscaped like you do the random items you get from amazon.

I know, I should modify the Milwaukee grinder and not the $30 Amazon chainsaw attachment... lol

A grinder chainsaw attachment $30. a trip to the ER because of the attachment $2,000. For everything else, there's MasterCard.

7:00 is anyone else thinking to go to Harbour freights and buy a disposable grinder?? Don't ruin a perfectly good grinder!!!

This is dangerous on so many levels, not to mention RPM could be higher than chainsaws (13,500 rpm) with some grunders going 20,000 rpm!

Considering that he managed to assemble a vegetable chopper backwards, here he could cut off a hand every second... LOL

modify the saw part and save your grinder,, i know its to late now,, your are doing a good my friend,,, i look forward to your shows...........................

As someone who has enjoyed a long career in the OPE industry, I am genuinely horrified by these items and others like them. That's because I have worked many cases where actual OPE was modified, sometimes only slightly, and often times the outcomes still shock me.. Seeing videos of other power tool types being modified to operate like OPE, but without any of the safety features is almost too stressful to watch. Almost!! Lol!! Stay safe my friends. There's a good reason that the companies that make these things don't stay in business very long.

😶🧐🤨😒😑🤔🥴WHY WOULD YOU NOT JUST TRIM THE CHEAP CHINESE PART INSTEAD OF THE TOOL?????🙄

Tyler your awesome but I think most of the products you put together don't work because there is an exact way to put those products together but your still one of my favorite youtubers because you never fail to surprise me even after watching 85% roughly between you first and second channel nothing but love man keep doing what you do best

That second one reminds me of some hackery we did to put a small circular saw blade onto our grinders back when I was a welder. We used it to cut just the welds out of the sides of aluminum tankers and separate pieces for repair. It was super dangerous and I took a chunk out of my face shield with it once.

**SPOILER** I am genuinely surprised Tyler didn't hurt himself.

How to tell if you're an idiot... you're thinking of buying this add on. Possibly the most dangerous tool I've seen.

Sooooo, instead of modifying the power tool, why not the accessory instead... And pretty sure the second one is intended for carving more than cutting

Phil Swift is back baby! Can you test the Flex Seal Flood Prevention products?

He’s playing with fire with that grinder circular blade, there was another you tuber who reviewed it and it sliced him open bad after it kicked back. if you search you should find it. Avoid them at all costs

Why wouldn’t you have cut the cheap chainsaw attachment to make it fit instead of ruining an expensive grinder 😅

“I have very limited experience with chainsaws.” You don’t say?😂😂

How the hell you have all your digits after using that chain disc without a handle is beyond me... crazy man

Oh Tyler, why do that to a quality tool? Should have just gone out and bought a Ryobi grinder >.>

That rubber bracelet thing was for the clamp I'm sure try that T and it will perform better

Next video . . . Testing Amazon artificial fingers. 🤣🤣🤣

It's obviously a problem with your grinder. ( this is a joke) :/

Why not Chop the metal from the brackets rather than from the nice grinder 🤦‍♂️

Couldn’t he just go to the other side to use the grinder disk one? Like that would mean the part that doesn’t let you saw further than an inch be on the other side 19:18

“A guard? Probably don’t need that.” Lmao 0:44

The little bracelet was a rubber ring to go on the grinder in between the chainsaw that way the clamp would grip right 😂

No one's gonna tell him to work from the other side of the wood, so the grinder body doesn't stop the cut?

Why didnt you cut material off the chainsaw parts instead of your only grinder

Did you seriously just grind the one thing stopping the chainsaw from spinning round into you off!?

This week on tylertube let's turn a grinder into a death machine 😆

1:35 I may be a little high, but surely squarebobs go with the spongepants?