The Acute Sharpening System Parts Kit

Подписаться 23 тыс.

Просмотров 25 тыс.

50% 1

A quick look at this kit of parts, from Eccentric Engineering in Australia. After purchasing just the plans - it was decided to buy the kit, which contains laser cut parts, many ready spotted for drilling and, tool-holder blanks for boring to required diameter. Quite a small unit but capable of some useful sharpening operations on smaller cutters etc.
A short demo video showing it in use can be seen here - www.oldmansshop...
( www.oldmansshop.com/ )

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@453421abcdefg12345 9 лет назад

Many thanks for giving us the "heads up" on this one, those of us that live in remote places and cant get to a tool store can use one of these, I will be following this one with interest. I will also look into getting one of these kits, Eccentric Engineering should be paying you a commission ! Chris B.

@ChrisB257 9 лет назад

Englishman French Not sure about commission Chris - I applaud Gary's efforts in developing this and feel it is useful for folks to know about it... for small shops anyways. Do watch the demo video www.oldmansshop.com/misc-vid-pages/acute-tool-sharpen.php

@EmmaRitson 9 лет назад

watching this with interest ChrisB257 it looks a good machine, and will be very interested to see how it goes together! thanks for posting,

@AmateurRedneckWorkshop 9 лет назад

Interesting. I will be eagerly waiting to see more video once you have it assembled. Thanks for sharing.

@ChrisB257 9 лет назад

cerberus Sorry late reply - my comments notification seems to have dried up! Thx Harold - hope to make a start soon but it'll be a lengthy process overall I think. Bit by bit!

@CJ_LEGAN 9 лет назад

Looking forward to see how it works out for you.

@multicraftman 9 лет назад

Hi Chris, thanks for making this video. I didn't know anything about this designer but I just finished a 3 part video on making a similar basic work table of this type, doesn't contain any of the attachments. I love the look of all the attachments and I may study your video link to the demo to see if I can copy some of these, maybe as you say when it gets a little cooler. Donald

@ChrisB257 9 лет назад

multicraftman Hi Donald - Sorry late reply - my comments notification seems to have dried up! One of the key aspects I think is the parallelogram approach, and also registration of tool holding seems pretty good. The demo video Gary made helps explain quite a bit - www.oldmansshop.com/misc-vid-pages/acute-tool-sharpen.php

@pierresgarage2687 9 лет назад

Hi Chris, It will be interesting to see how it performs... ;) From Australia, and, delivered by Kangaroo Airline..... Specialists in well tossed packages..... :-)) Pierre

@dwainloftin885 9 лет назад

Where to buy? Let me know. Thanks

@ChrisB257 9 лет назад

+Dwain Loftin Hi Dwain, It's from Australia. You can go to eccentricengineering.com.au - assuming this reply holds that link. If not just do a search for Eccentric Engineering I am two parts thru the build and hope to continue on it further before too long.

@Opinionator52 9 лет назад

Pretty darn cool Chris! Is there an attachment in the works to do end mill's diameter's? Still very cool even if not.... Much more life for tooling! Thanks..... :o) O,,,

@ChrisB257 9 лет назад

Opinionator52 Hi - right now the max dia for end mills is 16mm - so realistically with inch stuff, 7/16 will be a max. That said i have some ideas for dealing with larger later if possible. It's often the small ones that need a refresh more often. We'll see how it all pans out. :)

@wbmphd 9 лет назад

16mm is about 5/8".

@wbmphd 9 лет назад

16mm is about 5/8".

@wbmphd 9 лет назад

16mm is about 5/8".

@Opinionator52 9 лет назад

I was referring to sharpening the sides of the flutes like for side milling,,, not the size of the shank! I should have said sharpen......... :o) O,,,

@desmes62 9 лет назад

Bonjour, 1. Drawings and DVD - $40 ($44) 2. Parts kits - $250 ($275) 3. Finished units - $450 ($495) This is he not excessive? Do you think it is worth price? Regards de France

@hdoug5 9 лет назад

the plans seem cheap enough, whats the rate of exchange? anxiously awaiting your build :)

@ChrisB257 9 лет назад

hdoug5 I forget exactly, tho it can be checked on line -- I think on the whole thing I saved about 25% compared with the Oz pricing. The DVD is still in the works I believe.