@@Rimzler would you say the cinelog 35 v2 is a great first drone? I plan on using it for cinematic and freestyle until I can get more drones. Is it too loud to fly around people? What about around a neighborhood? Sorry to bother with the questions, just curious to get your opinion.
The V1 is one of the drones i used the most for work with full GoPro, always did the job, V2 is a good way of having redundancy, for sure is a little better, but imho not enough to switch as V1 is great already and I'm going to keep using it for riskier stuff😂
I so love the chicken chasing scene! Thanks to your video, I just ordered this and can't wait for it to arrive. Quick question. Since I got the GPS version, will the FC already be setup in Betaflight Configurator for Return to Home and Landing or do I need to set that up myself?
just purchased the cinelog35 v2 hd03 (elrs with gps) - and used your code brother. thanks for the informative videos. this is my first drone 😃 excited to get it and start making videos and then make some money 💰
You rotating around the dog made me smile wide this morning hahaha nice piloting skills man! And yeah I might buy this Cinewhoop this Summer. We'll see :)
Hello, do you happen to have any tutorials on configuring the DJI Remote Controller 2 in Betaflight (regarding arming, gps etc)? I also own a Geprc CineLog35 V2 with a DJI Air Unit, Goggles 2, and FPV Remote Controller 2.
Hey Rimzer, how are you? I wanted to ask you, would you be able to give me the settings you used in betaflight for your cinelog35 v2? I'm struggling to make it fly with the GoPro 11.
Great video. I cannot figure out how these GPERC drones are build and how to set them up? Do you have to build it, if so, does it require soldering? How is the setup? Do you have to configure ever single parameter, like you had to with Pixhawk controllers? Do they have some sort of flight modes or is it pure manual flight? Thanks.
If you get a BNF (bind and flight) it's already built and programmed, just have to link your radio and goggles but you have to get the appropriate version It has also stabilized modes
How is your googles signal so good? I have the cinelog 35 v2 with dji integra and i lose signal when im about 100metres from me in clear space. How could i solve this problem?
Good video IMHO. It confirms to me that as a GPS drone pilot moving to FPV i should start with the Cinebot30 O3 with 6S system and battery that lasts close to 8 mins. 4-5 mins on this seems too short coming from a M3.
I get over 10 minutes consistently out of GepRC 6S 1100 LiHV on my CineBot30. I'm expecting delivery of this CineLog35 V2 any day now. I'll be experimenting with batteries but I'm thinking GAONENG GNB 1300 LiHV may be ideal. I hope to get between 6 and 8 minutes out of it. I primarily bought the CineLog35 to chase chickens.
I got this drone and on the 3rd time flying it I crashed. When I plug it in to a battery or usb it lights up but there are no beeps. I can see the footage. The FC is flashing like it’s trying to bind and then stays solid red after a while with the receiver staying blue. Everything seems fine in beta flight. Any advice?
Mmh it's weird, no noise sounds like the escs are not connected to fc anymore, but the only thing powering on is 5v rail, It's probable that you will need to replace the board cause it's maybe got hit or bent
Ciao capo, do you have any suggestion about the cinelog35 v2 with the new motors it flys good but if I want to dive or go to zero trottle it wobbles like crazy... Run it with 1300mah and full GoPro 11.
Thank you so much for another great Video, Man. I just got this drone as well, would love if you can explain or send me a good tutorial how to bind it all together as I have a problem even to arm it Thank you
I bought this model 2 weeks ago and the drone flies great, it has enough power to carry the go pro but the problem is with the GPS, I set the settings as recommended by GEPRC, but the GPS sometimes works, sometimes it doesn't, mostly it doesn't work and it takes a long time to catch the bass satellites
Hey one quick question: I see that you are also getting DJI's "remote controller stick error" like me, is there a way to fix that? what is it? My controller keeps disconnecting from the air unit and I dont know if it is related... hmm Great video as always!
I pretty much ignore it, i believe there are 2 probable causes: 1) It's a bug from the avata, when you go in manual you have to align the sticks and this doesn't happen on o3, so it gives the error 2) Maybe it's to do with the gimbal spring screws on the back of the radio not being pressed all the way, but i like a little bit of friction and will not change it
I see thanks! It might be good to see a video on the different ranges you get with your setups, dji vs expresslrs vs ...etc. I'm seeing a lot of people complaining about the range of the new dji fpv setup with the integra and fpv remote 2 so maybe we can learn how you do it! As always great videos keep it up!
Hi there, could you please give me an advice me. Is it possible to pair cinelog 35 v2 Performance HD Avatar to DJI Goggles V2 ? Why I am asking because somebody write that is not possible and I don't know whether to buy a cinelog 35 v2 Performance HD Avatar or not?
You have to get the DJI version to use DJI goggles, either O3 like the one I reviewed that can record videos, or the caddx vista version that doesn't record video
Nice video man. Love it. If I live in Portugal, wich is a country from Europe, if I use your link Will I have problems with paying extra taxes? Thanks you man
Can you adjust the camera angle tilt on the Cinelog 35 v2? It looks like the O3 camera is held on by two screw on each side, and therefore the angle is non-adjustable?
With the O3 air unit and the DJI goggles, how are you getting the home direction and satellite counts appearing on your OSD? I selected them in Betaflight OSD but they don’t show up in my DJI goggles. I could really use the help! Thank you.
I think I figured out what is wrong. The GPS is no longer talking to the flight controller for some reason. I have to figure out why. This happened after I replaced the analog camera with the o3 air unit.
What do you recommend this one or the cinebot30? I'll be flying with a full sized GoPro and will be filming industrial construction site work and holiday videos
If you have to carry a full GoPro I'd go with the cinelog 35, slightly bigger but has more power and efficiency, it's more versatile imho Noise is slightly higher on 35 but at a lower pitch they are similarly annoying, expect a bit of noise ahahah
I would pick the 35 (and i do when working) because is more versatile imho, slightly larger than the 30 but not by a lot, flies better outside and can pull car chases and a bit of cinematic acro, and that's what I use it for, good indoors too and no much problem around people
Chicken chaser ;) dirty drone is instant karma :) Like the cinewhoop with gps idea, and also I'd fly it with o3 - good enough quality, less cash risked. But also I never fly for clients. Thanks for the review. My gf asked already, when are they traveling and eating delicious Italian food again? ;) greets, Mario
because I am relatively new I would like to ask your opinion if it is better to upgrade the Avata with axisflying or to get to buy the Geprc 35 ?thanks a lot
Hi! what your preffer, cinebot 30 or cinelog 35v2 (both with gopro 11)? I believe that cinebot is more popular compare to cinelog 35. I will buy an cinewhoop drone for video hobbie (cyclism and sport in general), I have mavic 3 but it drone is not enought for sport video (the perspective is too far and control is slow). Maybe the battery duration is very short (4 - 5 minutes, believe that cinelog have more battery time), is posible that cinelog .- bot fly 8 minutes with and without gopro 11? muchas gracias! (desde Chile)
Totally go with cinelog35, it's more versatile, efficient and can carry everything You can use the o3 without gp11, get much longer battery life, if you don't push with a 1300mah you could get to 8 minutes I believe
Greetings from Toronto. Very helpful video especially for a new fpv pilots like me. I have question if you can shine some light into it. I am looking to purchase GEORC CineLog 35 V2 HD O3 FPV. On the website of GEORC there are few options and I’m not sure which one is the best for me. I am looking to connect it to DJI FPV controller 2 and DJI Goggles Integra. I am seizing there are different options on the website and was wondering if you can give a little help on that. Thank you and I am looking forward to see new videos
Great thanks for the info, your video and comment was very helpful. I am just awaiting the drone to arrive. One more question GEPRC discontinued the GoPro 11 mini mouth for CineLog 35 V2. I have GoPro mini 11 that I would like to attach to the drone, any ideas from where I can purchase that particular mount or what other options are available out there. Thank you in advance for your reply.
Just got mine a week ago and Im having problems with the flight time, getting 2 minutes max with a 1300, and tried a gopro and It just get it up the air for 20 seconds almost max throttle, any ideas??
Totally possible, I do many jobs with It indoors, of course will make a little noise and move air (had the napkins fly away in a restaurant flying over tables) But if you keep that in mind is not bad at all and super controllable
do you actually think it flies well? this is my first cinewhoop and i feel like it flies like shit, almost not enjoyable. The center of gravity is extremely bad, the front ducts have 1/3 of their function blocked. the constant shaking and wobbling is dog.
@@RimzlerFor general cruising/exploring would something like a 4s Li Ion 2600 mah pack work ? (I just ordered the 4s version, not doing any Freestyle with it)
Thanks bro!! Did you hack goggles 2(or is it integra)? i can see you have betaflight information on your goggles screen, i wasnt able to do it, i understood it was only possible in the the other goggles v2, could you help me here? I have the ones with touch panel 🙏
Do you think it would fly more efficient and longer with 4 blades or 5 blades? I'm curious to know your opinion about it because I might buy this drone :)
Have to test a few things still, based on physics more blades are less efficient, but depends on many factors, i yet have to try with the old gemfan propellers which had a slight better feeling imho Anyway if you fly slow and make it lighter using a less heavy GoPro it should be quite better
