The elegant built quality and battery capacity is whats stands out of this power station. Its comparable to the ecoflow delta pro but with more capacity.
Well said. After using this for a month I have to say it is impressive. It has been running my tools with no problem. As I type its recharging some portable speakers.
I am going to "modify" an old cable with xt90 so that I can use mc4 connectors. This power station can charge at 3000w of solar. I have 2kw on the hill.
Isn’t the problem with these products the support? I’ve read bad reviews on support. If something goes wrong, they only have email support and no actual office to handle RMAs etc.
Nice PowerStation. The lights are well thought out, so that you can see what you are doing with the front panel and plugs. A few thoughts: With the TT-30R receptacle (3 prong hot-common-ground) you are only getting 120vac single phase to run into the transfer switch. Since they advertise it for emergency backup for the houose, I'm surprised it doesn't have an L14-20R receptacle (4 prong hot1-common-hot2-ground) so that you can use the full 240vac and get both hot sides to feed the transfer switch. That 240vac NEMA 6-20 plug (3 prong hot1-hot2-ground) doesn't provide a common so you can't balance the load across the two legs of the 240vac inverter.
The company is sending a Y cable. The tt30 on the front is only 120v. But the inverter supplies 240v across half of the receptacles. By using the special cable the unit can supply 240v. I will have to make another video once that cable arrives.
@@LandtoHouse Yes please make that video. I predict the reason the upper left NEMA 5-20R receptacle is sideways is related to that y cable feeding 240vac.
@jllaine I will make the update once the cable is sent. I will also have a large heater that needs 240v so I can test that the zendure can supply 240v at 3000w.
Has a very eco flow delta pro like design. Also you didn’t show the Wi-Fi or Bluetooth functionality. I assume that just like most of this system it would be very similar to the Ecoflow app.
This is a nice machine. I have a few other features that need testing. When I get wifi installed into the shop I plan on testing out the app. And Zendure is sending a Y cable to test 240v.
