Dude this is so cool! Looking forward to getting a few once they're in stock again. This opened up a new option for those of us who have detolf and book shelves that display figures in. Great video and truly helpful!
*Looks nice for extra **MyseIf.Furniture** kitchen storage. Matches with oak cabinets and oak floor. Took my friend and I about 2 hours to assemble. Worth the price. We are pleased.*
Disappointed in this video because you didn't actually show us how to put them in !! you just explain it but you didn't actually show us how to do it like splitting that tape, which looks pretty hard and then exactly what are the cable tie things used for? I don't get it!? 🥺
Those translucent wires basically loop out from the bottom front door gap and goes to the back of the cabinet or to wherever your USB adapter are. We worked with a wire factory to have these wires fabricated for us specially for detolf and they work great in blending to give that "wire-less" feel :)
@@wilsono.4920 Hi! While there is no instructions, our setup are fabricated for ease of installation. 1) Paste the led strips into the bracket and cover back the diffuser cover. 2) Apply own adhesive on the bracket and paste the whole bracket on the lower front edge of all shelves with the cover facing inwards. 3) Tidy up the the wires onto the side grey pole of the detolf with the included zip ties.
haha, this is a bit creepy, I just posted earlier on both FB and Reddit about my upgraded LED-lightning from Luke Light on my Detolfs and now here you are with this video :)
Great video. Cleanest Detolf set up I’ve seen to date. Icy white lights, aluminium channels with diffuser are the way to go. What’s the name of the unit that you are using to rise those 4 Detolfs up?
This looks so much better than either other kits I've seen or anything I could cobble together myself, definitely nabbing the kit when they're in stock (this set up is honestly pretty much what I had come up with to make from scratch before determining it was not cost effective to make just one due to minimum quantities on all the various bits, glad to find someone making it)
Amazing setup man! It looks so good with the white background. Thank you so much for this review. I'm hoping they add wifi controllers and RGB options for their lights in the future. If they do I'm sold!
Has anyone used the 1ft aluminum channels found on Amazon? The Lukelight page specifically states that their channels are 32cm and the Amazon ones are 30cm. Apparently the extra 2cm protects the fragile wire connections? I've already spent $240 on lights, really don't eat to drop another 200 bucks for these channels.
I ordered these last week.everything is in stock now after this video the cool white strip and aluminum defuser is sold out.lol the jedha patrol brain control is real lol.love ya ryan!
Hello, May I know the LED lighting also purchased in IKEA? What is the model number n name? And the strip that you show to cover the side wires is what type of material? Where to purchase it ya? Thank you.
The only problem with all the reviews or how to install videos regarding the Lukelighting kits is there is a huge lack of info imo left out . Most show a finished product or after it’s all done, they show more of how to wipe the defolf than the other many process of how to install the diffuser covers etc. i personally had to scrap the diffuser covers they ended up being more trouble than there worth, I broke a wire wrestling trying to get the diffuser cover on the v bracket, it’s things like this they don’t show or help with and there is no info out there at all or how to vids with installation . Thx
I'm curious as to how you supplied power to these lights. Did you daisy chain everything together into one power supply? Surely each light doesn't require it's own supply right? I just picked up two DETOLF shelves for the first time, so this video was extremely...enlightening.
Yeah, I was also wondering about the power source. How do people get a cable for power into these cabinets? I also have two and have been wondering about lighting because the figures don't look their best without it.
Yup, that's one of the reason on why we designed them to be powered by USB instead of typical cabinet lighting where they requires to occupy a wall socket on its own, our light kits are all powered by USB and they can be powered by plugging them into a USB Hub or adapter(not included), you can power multiple light kits on 1 USB hub that uses only 1 wall socket, as they are USB powered, they draw very minimum power and can be on for a long time.
Just found your video and bought these immediately after viewing. Thank you! Quick question, what are you using to raise your Detolf's above the ground? I'm having a hard time finding a good solution outside of DIY and that's just not going to happen lol.
I love your videos and have 12 Hot toys ready to display. I just built 4 detolfs . I'm going to buy the V shaped brackets from Luke Light. What is your suggestion for colored LED lights for my detolf? I love having the ability to change colors.
RGB led using Red, Green & Blue chip to mimic colors using the 3 chips for wide range combination. While they offers million of color combination, they do not produce a true warm or white tone. RGB produce light yellow to replicate a warm feel therefore you will get a more yellowish feel on your figures while it uses light blue to replicate a white tone which often illuminate a hint of blue tone on your collectibles. A dedicated white or warm tone chip are required for the true color tone feel that a RGB led can't produce. Depend on your requirement & needs, if you required wide flexibility of colors as your main tone source, then RGB is the way to go.
I've been looking for lighting my 4 cabinets for over a year! I ordered today (they had 12 sets left). I'm so excited. Could you show how you plugged in the USB's to the wall?
Do you have a tutorial on how you made the base for the detolfs to stand on ? I was thinking of using a ikea one but I’m concerned about weight, might need to reinforce them but at that point might as well make my own
Oof. I have 5 Detolfs with these installed, and i gotta figure out how to move them 10 minutes down the street. All would be good if not for the fact that the top light is almost impossible to get off with that tape.
Quick question...Did you start the lights at the top or bottom of the detolf? My Luke Lights arrived and am debating where to have all the cords go. Thanks!
Hi I’m new to collecting and was wondering what you do with your 1/4 scale figures? These look like they fit 1/6th perfectly but do you have any suggestions for 1/4 scale?
RIP all sold out and I have no idea how they'd go with an Aussie buyer anyway - Impressive Rouge-1 Collection my guy, definitely my favourite Starwars movie
Ordered 3 sets after watching your video. Also got the dimmer switches. Couple of questions, Did you feed the lights in from the top, or bottom? Why do you prefer the non black background? Thanks
Wow this is WAY better than regular LED strips, I've always found them way too distracting and don't do peoples collections justice, this is better for brining focus to the collectibles.
The lights from Home Depot that a lot of us use are great, but they’re a bit of a pain to install and the rubber yellows over time. I think I might have to get these later this year or next year when my current lights need to be replaced.
@@gregg9022 Yeah. I had them in my Detolf for a year and then bought a second Detolf. When I installed new lights in it, the difference was so bad that I had to go buy a another new set of lights for the first Detolf so they'd both match.
These aluminum channels look identical to the ones I got for real cheap off amazon--not measured, of course, but you can easily measure and cut them down with a pair of metal sheers.
Was so happy to finally get these in the mail today just to find out I needed to buy the brackets separately.. Time to wait another week. ARGHHHHHHH!!!!!
What a business opportunity I’ve lost! I made that lighting myself over a year ago... THAT EXACT WAY. 🤦🏻♂️ If you add a backdrop and get the light no to reflect on the back glass it gets way better.
I have LED's from amazon that are ok, but this looks like a better option. One of the things I dont want to give up is the color and dimming options. Enjoyed the review, the lights look solid
fair enough. I just haven't been a fan of RGB in my detolfs. Unless you get something like Phillips Hue with a dedicated white LED's, you never get a good white color. It's always off white
I agree! I've had my eye on some 1ft channels on Amazon but the lukelight page specifically states that those are 2cm shorter than his and apparently that's a big deal. Ordered lukelights for 6 detolfs and now they just sit in the box because I don't want to spend another $200 on overpriced aluminum.
Great video, thanks. This product seems like a good solution to lighting. Looks like it could be used in Ikea Billy cases without a lot of fussing. Also might be interesting to connect some of the strips through a dimmer. Thanks again for the video!
@@ASTRALEONofficial We had stop selling them quite sometime ago as they required a dedicated strip plug and 4 colored wires for fabrication which makes hiding them difficult. For now we are focusing on the 2 main color tones :)
