Dan Wesson Co2 Revolver PRO POWER MOD and TUNE UP
Twice the power in a few minutes. Power after mod: 3.43Ft Lb - 4.66 joules - 427fps. Plus Fix chamber not revolving issue.
Easy valve swap.
This Dan Wesson was shooting low at around 250fps once we swapped the valve for a valve from a dan wesson 8inch pellet revolver, we upped that to over 427fps. We also fixed the revolving chamber issue that some of you have had, where the chamber does not revolve and seat fully causing the pellet to half index and jam. We show how to change these parts easily despite it being the first time we have done this.
Dont waste your time watching other videos on RU-vid talking about increasing the hammer strength by way of an adjustable nut and bolt assembly in the grip, we have tried this and there is a reason that non of those videos show a chronograph output before and after the mod, its because it doesnt work.
Having talked with ASG for many months on this subject we were given the opportunity to trail the 8 inch valve with the higher output. This is due to the internal workings and thinner washer inside the valve.
In this video we show a before and after chronograph and the output.
Team ASG
@actionsportgames
bit.ly/ASGteam
Buy the Dan Wesson Here:
bit.ly/danwesson
Buy JSB Exact 177 (the 4.53mm size, the pellets stay in shells)
bit.ly/JSB177453
Please subscribe, share and like the video as this enables us to continue bringing you new and unique videos. If you would like to help us along with a wee dram or ammo click here:
bit.ly/patreonwnw
Thanks for watching, stay tuned for more from Whisky & Weapons
6 фев 2017
