The BEST Rebel 1100 Shock Upgrade! (Burly Brand Stilettos)

Подписаться 77 тыс.

Просмотров 46 тыс.

50% 1

These Burly Brand Stiletto Shocks are hands down the BEST thing I’ve done to my Rebel 1100! The install wasn’t without issue, but I honestly could NOT be happier with the end results! In my eyes, the Rebel 1100’s suspension has always been a pain point, but now it’s one of my favorite parts of the bike!
Skip around to exactly which parts you want to see!-
0:00- Intro/Explanation
01:11- Unboxing & Initial Impressions
03:07- Seat Height & Fender Height Measurements Pre-Installation
03:41- Beginning The Install & Jacking The Bike Up
05:20- Removing The Stock Shock Bolts
06:33- Left Shock Removal
07:12- Comparing The Stiletto Shocks vs Stock Shocks
08:44- Right Shock Removal
10:01- Left Side Stiletto Shock Install
11:37- Right Side Stiletto Shock Install
12:17- Ran Into The First Issue...
13:10- Finishing Up & Checking Out The Bike
14:18- Seat Height & Fender Height Measurements Post-Installation
14:53- Sitting On The Bike For The First Time & Discovering Another Issue...
15:30- Explanation Of Yet ANOTHER Issue & A Word Of Advice
16:50- All Issues Squared Away And Ready To Rock!
17:45- Chain Adjustment ( • Rebel 1100 chain adjus... )
18:08- First Ride With The Stiletto Shocks
20:55- Is The Seat Height Too Tall For Shorter Riders?
22:32- Side By Side Comparison With A Stock Rebel 1100
23:48- Video Wrap Up & Discount Code!
Support the channel through Patreon!- / lifeofburch
Follow me on Instagram for more daily stuff!- @Life.Of.Burch
Follow me on TikTok for exclusive content!- @LifeOfBurch
Support the channel by purchasing through one of the links below!
v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v
Rebel 1100 Thrashin Supply Essential Saddlebags- amzn.to/3CcW1XY
Rebel 1100 Radiant Cycles Shorty GP Exhaust- amzn.to/2Yb8hqw
Rebel 300/500 Radiant Cycles Shorty GP Exhaust- amzn.to/2Yb8hqw
Rebel 300/500 Passenger Seat/Foot Peg Kit- amzn.to/2TAg2TW
Rebel 300/500 T-Rex Racing Exhaust/Frame Sliders- amzn.to/3i6lZ5R
Rebel 300/500 MZS Tuning Adjustable Levers- amzn.to/345lF2b
Honda Grom '14-'16 Saddlemen Seat- amzn.to/3pcKbHl
My Camera- amzn.to/36ZQiEY
My Microphone- amzn.to/2oP438K
My Gear-
Helmet- Bell Qualifier DLX with Transitions Face Shield amzn.to/2ABebaN
Jacket- Joe Rocket Phoenix Ion amzn.to/370ZXfm

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 217

@LifeOfBurch 2 года назад

Skip around to exactly which parts you want to see!- 0:00- Intro/Explanation 01:11- Unboxing & Initial Impressions 03:07- Seat Height & Fender Height Measurements Pre-Installation 03:41- Beginning The Install & Jacking The Bike Up 05:20- Removing The Stock Shock Bolts 06:33- Left Shock Removal 07:12- Comparing The Stiletto Shocks vs Stock Shocks 08:44- Right Shock Removal 10:01- Left Side Stiletto Shock Install 11:37- Right Side Stiletto Shock Install 12:17- Ran Into The First Issue... 13:10- Finishing Up & Checking Out The Bike 14:18- Seat Height & Fender Height Measurements Post-Installation 14:53- Sitting On The Bike For The First Time & Discovering Another Issue... 15:30- Explanation Of Yet ANOTHER Issue & A Word Of Advice 16:50- All Issues Squared Away And Ready To Rock! 17:45- Chain Adjustment (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0qF0eLEi-M4.html) 18:08- First Ride With The Stiletto Shocks 20:55- Is The Seat Height Too Tall For Shorter Riders? 22:32- Side By Side Comparison With A Stock Rebel 1100 23:48- Video Wrap Up & Discount Code!

@user-kp4sc9bv8u Месяц назад

Any updates? Still using the shocks? Did they hold up?

@LifeOfBurch Месяц назад

@@user-kp4sc9bv8u still using em and still loving em! The bushings have worn out much quicker than I’d hoped, but Burly Brand sent me some polyurethane bushings that I’ll be putting in this week actually. I believe they said they plan to switch the new shocks to polyurethane since that’s what they use for the heavier Harley’s anyway…but don’t quote me on that. If your shocks don’t have the poly bushings, it looks like they’re Progressive Suspension 5008-028 bushings.

@manabroad2661 2 года назад

Love the outtakes in your videos my man. Stuff never goes as planned for me when performing assembly or modifications. I always feel like an idiot because most videos don’t show the difficulties encountered during a “simple fix”. Keep”‘em coming!

@Judgeshred88 11 месяцев назад

Everything I look at doing to my rebel you have always tried and tested. Thank you for you channel

@suave1547 2 года назад

Can’t wait to get a job and save up for a bike. I’m excited to do such things like this to make my bike look and perform better! YOU’RE MY INSPIRATION BURCH

@Jay0346 2 года назад

Still saving for my rebel 1100. Keep up the good work!

@Devoted_Rebel 2 года назад

That is a very justified rant I'd be doing the same thing, I really hope I don't have this problem. The shocks look awesome.

@LifeOfBurch 2 года назад

Thanks dude! Hopefully me encountering this problem will help others be more careful and not have the same issue 🙏🏻

@ontherebel11 2 года назад

Omg I love stilletos too! 😅 Awesome stuff Mike as always! Thank you for the mention brother!! 🙏

@LifeOfBurch 2 года назад

I think we’re talking about different stilettos! 😳😅😂😂😂

@BurlyBrand96 2 года назад

Great install video. Love all the positive feedback!

@LifeOfBurch 2 года назад

The positive feedback is easy when these things kick so much ass! 🙌🏻 The other day I clicked the preload up, got out for 6 hours of backroads, and fell even more in love with them! Can’t wait to put them through the paces! 🤘🏻

@RebelFiveHundredShorts 2 года назад

Great video! Thanks for sharing on the butter bolts will keep that in mind! 🤙🏼🙏

@BreeZy11s 2 года назад

Awesome Burch! I had these on my 500 they feel great and way better prices then the ohlins and YSS and to the 500s owners Yes these 1100 shocks will fit. 🤘🏻

@LifeOfBurch 2 года назад

Dooope dude! Glad to hear they’re a direct fit for the 500 too! 🤘🏻

@Mango_Saintango 2 года назад

Great video. Not only does this add shocks to my future upgrades, I will also look into bolt upgrades 😅

@em5463 Год назад

i see this and considering to buy another brand bike.

@Mango_Saintango Год назад

@@em5463 I can say this, one year later and I don't regret buying this bike!!!

@Mrdrivereight 2 года назад

Nice install and I hope you can get some good lean angles with them. When I worked at HD every wanted burly slammed shocks where Im at everyone wanted that lowered look. Crazy about that bolt stripping... Don't tell Nina 😂

@SLIGHT_ 2 года назад

Lol love the honest frustration you had… it happens to the best of us. Very nice upgrade!!

@LifeOfBurch 2 года назад

Looking back it’s funny, but in the moment I was HEATED! 😂 My garage is 20 mins from my house. When the first bolt stripped I had to go home to get the new bolt and a drill to extract the old bolt, then drive back to the garage. Get back to the garage and the drill’s battery dies two seconds later. Go to Home Depot for a new battery, realize they’re $80+, and just go back home for more batteries, then back to the garage. It was a multi-hour chore getting that damn thing out, just for it to happen AGAIN! 😅😭😂 Gotta love bikes man…

@SLIGHT_ 2 года назад

@@LifeOfBurch oh I get it… being a tech myself, it does happen. Trick is to stay calm over it… frustration only bring more problems. Again well done

@LifeOfBurch 2 года назад

@@SLIGHT_ thanks brotha 🙏🏻🙏🏻🙏🏻

@VonKrieg 2 года назад

Right on man, looks like a totally worthy upgrade!

@LifeOfBurch 2 года назад

I’m loving them dude! 🙌🏻🙌🏻🙌🏻

@captainobvious5349 2 месяца назад

Im surprised more people dont do this immediately The shocks are only around $345 and probably 30 minutes to change out (well, I say that)😮 Great video, bro!! Ive learned so much from watching your videos!!!

@jameswoods6900 2 года назад

I like how you show the Good, Bad & Ugly!

@raybrensike42 8 месяцев назад

The thing about shocks is, I would imagine it to be impossible to build them with the dampening that would be ideal for all rider weights and loads, and then there is the matter of trading off comfort for performance. It's one thing to get a comfortable ride over potholed city streets and another to go over bumps on a curve at 80 mph. I can't imagine one setting of preload, compression dampening, or rebound dampening would be equally ideal for both of those situations because they are quite different. Springs, preload adjustment, and dampening, for both compression and rebound all work together, or against each other, which is why I wish every shock company provided an assortment of springs and had dampening adjustments for both compression and rebound. I know that would be more expensive, but I believe it would be worth it. I got a new shock for my bike, and I was told that it would be adjusted for my weight and riding based on the information I gave them. Though it had preload adjustment and rebound adjustment, it had no compression adjustment. I began experimenting with preload and rebound adjustments, and through all of that, where I ended up, was at the same location the shocks came with. I believe that where your shock is adjusted for compression, will also sort of dictate where your other settings will be. If you go rather firm on the compression setting, expect that you will likely be setting the rebound rather firmly also, otherwise it will feel "boingedy" or as if you are "bunny hopping" However if your preload is softer, your other settings will likely change to adapt. What I'm saying is, that it all works together, so you want to have all the options of adjustments you can get, but I consider the foundation of the ride to be the right springs, and enough travel. Without enough travel, you have nothing to work with. Sounds like they got it right. Good choice on shocks.

@youtoobrx4 2 года назад

Hi Burch. 18:18 - you missed the jump launch test! Keep up the good content.

@RPDXC Месяц назад

Awesome vid. If your a taller rider, these shocks along with some lowered pegs would make a huge difference, without sacrificing stock 35 degree lean angle. Thats a game changer. This will be on the top of my list of mods to do to the new bike.

@douglasradowick508 Год назад

Burch, these shocks(Burly Brand) are the product line I will be putting on all my MC's for sure! 🏍️👍😁Doug

@lucascheeley3920 Год назад

Just installed mine. One was noisy when I first sat down and stood up repeatedly. However, after a 4 minute test ride, they both sound normal. Just needed a very small break in ride. Otherwise great video. Thank you for stripping your bolts so I don't have to.

@Balls3080 2 года назад

Thanks for the vid and update. Prob good idea to order new bolts anyways for these suspension type upgrades. Honda may have thought ppl would not be swapping those items out or only take to dealer for work. So they prob put new bolts anyways there.

@lumberninja Месяц назад

Hey man great video! My wife loved your review and immediately bought them for her 2023 1100. We just completed the install and noticed when the bike goes into its side stand, it’s a LOT more leaned over. Wondered if you noticed the same and made a side stand upgrade as well? If you did a new stand, could you share what you bought and perhaps a quick Burch install video!? Thanks in advance and again, GREAT video!

@MrSmallbigguy 2 года назад

I agree, the parts I've switched have always had a striped screw at least. They are very soft

@MrSmallbigguy 2 года назад

It looks sick though

@kikitandtalkingpeoplebusin5766 10 месяцев назад

Thanks for this recommendation - these Burley Brand Stilettos are the shit

@larifari4371 5 месяцев назад

@kikitandtalkingpeoplebusin5766 ok! Good to hear sombody who didn't like them. To soft or to hard or what did they mess up?

@MotoMango 2 года назад

Great stuff bro! Just found your channel 🤘🤘

@LifeOfBurch 2 года назад

Thanks dude!! Stoked to have you along for the ride! 🤘🏻🤘🏻🤘🏻

@MrDarrendr 2 года назад

So now you're a few months further on with the stilettos, are you still loving them? How much have they improved the comfort? Keep up the great content dude

@mahermaher502 6 месяцев назад

If you're weight less than 180 lb, this shock is not good for you. You will go back to OEM honda one. Like what I did.

@larifari4371 5 месяцев назад

@mahermaher502 THX, that's an important Info for me! I guess they where to harsh than even in the "softest" setting? Was it the spring or the dampening or both?

@LinkFelton 2 года назад

Eyyy, been looking forward to this video!

@LifeOfBurch 2 года назад

The time has finally come!! 🙌🏻🙏🏻🤘🏻

@LinkFelton 2 года назад

@@LifeOfBurch Just finished the whole thing and I have now added this as a future upgrade. Thanks Burch!

@LifeOfBurch 2 года назад

@@LinkFelton it’s SO worth it dude! And stay tuned cause we’re throwing my stock suspension on Nina’s 300! So if that works out then you could sell your stock suspension to a 300/500 owner and make most of your money back 🤔😳

@rpontonjr 2 года назад

Don't forget to adjust the headlight!

@user-yl9ex5lp4x 10 месяцев назад

Definitely will do those suspensions and a bar riser I’m a pretty tall rider

@frankfromchicago9248 2 года назад

Interesting, thanks for the information

@rkeefer58 Год назад

Hey Burch those make your bike pop brother!

@MotoTvWoodsFarm 2 года назад

nice bike great information

@daxreacts3620 2 года назад

Hi Birch ! Hopefully everything is going well for you now :) Mentally and physically. Please do a second rendition of the Siri video ! Should be a whole series like once a month. I did enjoy that video way too much

@LifeOfBurch 2 года назад

Everything is great, thank you!! As soon as it finally warms up I definitely plan on doing more Siri videos and other random adventures like that! Glad you liked it dude!! 🤘🏻

@daxreacts3620 2 года назад

@@LifeOfBurch that is awesome to hear ! I just got a honda CB125F from my dad :) in 2 weeks i'm starting my motorcycle courses and in a month i'm passing my exams. Hopefully i'll get to ride soon !

@LifeOfBurch 2 года назад

@@daxreacts3620 that’s awesome dude! I’ll be cheering you on! Have fun in your classes and learn a lot! You got this! 🙌🏻

@mickeyreyes3189 2 года назад

Hey there, I would love to see how Nina fits on the bike now with the added height, as a inseam challenged rider I would love to see before I add these to my bike. Thanks in advance!

@Smaktastik 2 года назад

I had the same issue with Honda's bolts. I had to replace the right fender subframe piece because the forward bolt decided to twist off. Then, the extractor siezed in the bolt. Completely wrecked.

@jeffarmentrout2863 2 года назад

Looks great! What bit did you use to back out the bolt on the right?

@milflover8088 2 года назад

Literally had the EXACT same issue when I put the BB rear frame sliders on. Used a torque wrench and everything. Ended up putting SS bolts from lowes in

@LifeOfBurch 2 года назад

Dang that sucks! I don’t know what’s up with these bolts, but I’m glad you found a solution!

@wrxguyusa 2 года назад

I broke some OEM nuts doing frame sliders too. I learned there's a reason why professional torque wrenches cost $150+ and my crap wrench was probably $20. You can't trust them, by feel is more reliable. I only use Precision Instruments torque wrenches now. Match the bolt size on McMaster-Carr. You can probably get 10 for the price of 1 from the dealer and higher quality.

@jaybosher6144 2 года назад

check out reviews on some of those cheap wrenches. at most the margin of error is a bit over 5% vs the rating. at 6lb ft there's no excuse for those bolts to sheer. it's crap hardware

@cocoapuffpuffs7374 2 года назад

When will you switch out the mirrors? Either get some bad mirrors or under bar mirrors. from what I’ve seen they make the bike look 100000x better!

@wave6413 2 года назад

Wow that was a good review. Deposit pid for mine. I am wondering if I just do the upgrade from the get go.

@LifeOfBurch 2 года назад

Honestly I'd do it if I were you! I've put in several more hours of riding on the stilettos since posting this, and they're superior to the stock shocks in every way! You could probably even sell your 0 mile stock shocks and recoup most, if not all, of your money back.

@Brusilnik 2 года назад

Man, I must be lucky so far. The fender bolts and shock bolts were SUPER tight on mine, but they didn't strip for me. I've had the shocks on and off a few times with no issues. Same goes for the fender bolts. I did notice a pretty good amount of rust on the mounts though... did you see anything like that? Did you notice any fitment clearance issues between the swingarm and exhaust? Really looking forward to these shocks, thanks for the update!

@LifeOfBurch 2 года назад

I did notice some rust inside the top left mounting point, but all the others were fine. Not sure why it was just that one though? As for clearance, there’s no issues anywhere! Good to go 100%. I clicked the preload up to the second setting and got out for 6 hours of backroads the other day and these things rippp!! Such an improvement in every way!

@andyhorn2509 2 года назад

Nice install video. One click at a time

@LifeOfBurch 2 года назад

Thanks Andy! 🙏🏻

@davidwollpert5276 2 года назад

Love your channel! Wanted to say that first. Now I have to say that the bolt breaking like that really worries me. Honda has some problem with their parts procurement process, obviously. Either their priorities or wrong headed, or their quality inspection is lacking. Either way, Honda is going to lose their reputation for quality if they don’t get their act together. Combine the bad bolt with a wobbly front end and resulting 100 mph top end limit (the Shadow Phantom 750 will do 110), and you have some questions that need to be answered.

@feloniousmonk3049 Год назад

The front end wobble was from his smart phone on the handlebars. Get a mini fairing.

@davidwollpert5276 Год назад

@@feloniousmonk3049 he said it was from that, but he has indicated that it is still there in later videos. I think it may be an aerodynamic issue with the lightness and slant of the front of the bike. Some kind of front wing might be a solution.

@TubeClift Год назад

Those 5mm and 6mm bolts should be available at any local hardware store, and for not much money. For bolts that small, it might be just fine to just use your experience and tighten them just "by hand" without a torque wrench.

@WhitneyKerr 2 года назад

you know you love MX when at 18:17 you see an opportunity and not an obstacle XD

@LifeOfBurch 2 года назад

Hahah exactly! 😂🤘🏻

@thetsoe5318 5 месяцев назад

I'm about to get my rebel tomorrow. Should I upgrade my seats? I'm just using it for in town travel. Will definitely get those burly shocks

@supagirl1521 19 дней назад

I’ve owned three Hondas andI work at a powersports dealership. The “butter soft bolts” is a common Honda issue for our techs.

@TableTopBiker 2 года назад

Hey Burch. Got an idea for you. At some point, make a video showing a compilation of all the issues you've found with this bike. Not to shit on Honda but hopefully call attention to these issues.

@scottglick6453 2 года назад

Dope video...

@LifeOfBurch 2 года назад

Thanks Scott!! 🙏🏻🙏🏻🙏🏻

@josephsaia5527 Год назад

Great video! Anybody found upgraded better quality Shock bolts ?

@jakeosborn517 2 года назад

Those torque wrench's you have are notorious for being inaccurate. Also when you are done with the tool, you have to set them back to the lowest setting or else they will get even more messed up. Get a electronic torque testing device to see if they are messed up, if so, you can return them if you just bought them.

@pggaddy5297 2 года назад

Hi Burch, love your videos. Do you know if I could use the 12.5 instead of the 13"?

@larifari4371 5 месяцев назад

That's what thought! Should fit better and still have way more travel than stock. Did you try them?

@hvymax 2 года назад

The grease was for the sleeves. Might even help prevent the rust you were talking about.

@chrislaws4785 Год назад

If i was you i would ask Burly Brand if they could Just start including replacement bolts for the shocks, i mean including at least 2 replacement bolts would be good enough and would only cost burly brand literal pennies to include better bolts than the stock Honda ones.

@midnorthmidwest 2 года назад

Would like to here how the bike handles at speed now ie does the front feel more planted.

@MrShopvideo Год назад

Is there any worry about changing the steering angle with longer shocks?

@swar00pkulkarn1 Год назад

Do you have any review of the burly front fork springs you were referring to in the video?

@molallamerica896 2 года назад

A little grease inside those adapter collars would be good to prevent squeaks and rust.

@Closs013 2 года назад

Great video! Would love a shock upgrade. I’ve got a 500 but really don’t want to increase the seat height. The Mustang seat already added about an inch. I’m 5’1 and need every inch that I can get. Any suggestions on shocks?

@LifeOfBurch 2 года назад

Thanks! I think Ohlins makes shocks for the 500, but they’re pricey. I’m going to take my stock shocks and put them in my girlfriend’s Rebel 300, so maybe you could try finding used 1100 shocks once someone upgrades theirs? Should be a direct fit and I’m assuming same height.

@Closs013 2 года назад

@@LifeOfBurch The Ohlins are shockingly expensive (pun intended) but definitely a good option!

@corydavis3258 9 месяцев назад

@LifeOfBurch did your stock 1100 shocks fit on the 300

@Mahaney82 2 года назад

I just took on a large project with an 05 VTX 1300. Firts bike and Im hacking it up.Do you know any local mechanics that are good with carbs?

@rayzimmer693 2 года назад

Hey Burch, I'm bottoming out on my 1100 stock shocks. Wondering if you have any idea how much extra weight it would take to bottom out the Stilettos? I'm 200lb with all my gear on. Would like the extra seat height but considering YSS shocks with a heavier spring but not much more travel or height. Thoughts please.

@feloniousmonk3049 Год назад

Add 5 clicks more preload on your rear shocks and it should be in the ball park, less bottoming.

@johnmitchell9705 Год назад

How was the freeway driving with the rear of the bike higher, including with a passenger?

@cedricbrown8810 2 года назад

Great video, what is the part number for the rebel ???? B28-1251 or B28-1254.....

@stanc521212 Год назад

im looking for the same answer. 1254 seem out of stock but 1251 is on amazon for $280. not sure if they the same and will fit

@feloniousmonk3049 Год назад

Honda is obviously using 1x use bolts like the germans do. You should replace ALL 4 BOLTs when you do the shock replacements

@Firrynight Год назад

i wish there were after market bolts for the shocks

@LucasJames_ Год назад

most dealers will replace those sort of bolts with new when performing any work like this, generally the bolts weaken after being tightened even just once so they aren't as strong the second time round (source; me, I work at a car dealership)

@feloniousmonk3049 Год назад

One time torque to yield bolts, common on German made cars.

@mrhoneys2012 2 года назад

Dope

@LifeOfBurch 2 года назад

🤘🏻🤘🏻🤘🏻

@Foodgeek 2 года назад

Hey Burch, did you do a follow-up on this? I wonder if you feel like this is a significant improvement long term? :)

@LifeOfBurch 2 года назад

I didn’t do a video specifically as a follow up, but I’ve talked about it in a few videos since then- they’re hands down one of the BEST things I’ve done to the bike! Ride quality is SIGNIFICANTLY improved both on solo rides and two-up rides, and it handles much better. And I know you’re taller so I’m sure you’ll like the slight raise in seat height too!

@Foodgeek 2 года назад

@@LifeOfBurch Awesome. Thanks :) I'll see how much they want for shipping it all the way to me ;)

@Foodgeek 2 года назад

@@LifeOfBurch Alright, I ordered them. They're out of stock currently so it's gonna be until end of July with shipping from the States and all :)

@LifeOfBurch 2 года назад

@@Foodgeek nice dude, you’re going to LOVE them! Hopefully shipping didn’t cost you an arm and a leg…which reminds me, I still have to ship out your hoodie 😅😂

@thinktruthlogic Год назад

@@LifeOfBurch Installed then on my Rebel 1100 Touring. I honestly don't see an improvement in the ride. Not only that, with the hard saddle bags in place it is impossible to adjust the shocks as the panniers and muffler are in the way. So not impressed.

@briankuehn8376 2 года назад

Do you have a promo code for Burly Brand? I just got a Rebel and would love to deck it out in Burly Brand parts.

@joe2479 2 года назад

So you have changed the handling because the rake is now different?

@hvymax 2 года назад

KLR is the opposite. The threads are made of Zamac. Maybe you could find better bolts than factory at Lowes?

@MrDarrendr 2 года назад

Hi Mike, so, 2 months down the road, still loving them? Just about to pull the trigger on a pair from a uk supplier. Thanks, regards to you and Neena

@SkulkingProwler 2 года назад

Hey u got a link? I was looking for these shocks but can't find them in europe

@priit7777 2 года назад

good thing you didn't give us link to the shocks shop page...

@02155Tony 2 года назад

Just curious, Why don`t you purchase a few upgraded bolts at the hardware store? Why use soft hardware? Purchase a stabilizer bar for your fork and your wobble will disappear. JMHO

@kevinhall7076 Год назад

Have you noticed a change in the front wheel tracking since you've installed the new shocks? Has the wobble gone away? I only ask since the longer shock should shift more weight to the front wheel and reduce the rake angle. Thanks!

@feloniousmonk3049 Год назад

Put the smart phone behind a fairing, and the wobble goes away.

@kevinhall7076 Год назад

@@feloniousmonk3049 I've seen that mentioned before. I don't have a Rebel yet, just looking into it. I don't use a smart phone mount on my bikes anyway. Just curious how the new shocks affect handling including low speed maneuverability. Thanks!

@TubeClift Год назад

Yes, I would be interested in that question also. For sure the handling would be affected by that much of a change in steering geometry.

@allenpearson9716 10 месяцев назад

Why did you choose the stiletto over the slammer?

@awesomeerr8765 2 года назад

Whats up with that panigale v2 over there...DID YOU BUY MY DREAM BIKE!?

@MrPapi67 Год назад

Could it be out there, black stainless for those bolts that broke off. For the H rebel

@josephsaia5527 Год назад

Will a T Rex Racing Centerstand still lift the rear tire off the ground?

@robertbridges6271 2 года назад

Little bit of a stupid question, but would these fit onto a rebel 500? And how would I check if shocks fit my bike

@LifeOfBurch 2 года назад

They should fit just fine! Someone already put some on their 500, but I’m not sure if they were a direct bolt on or if any modifications were needed. Also not sure if the 500’s shocks are the same length as the 1100 or not. If they’re shorter, then the stilettos would raise the 500 a bit more than my 1100. I’m gonna be putting my stock 1100 suspension on my girlfriend’s 300 soon though, so if those are a direct swap then we’ll know the stilettos are as well!

@badjuju6563 2 года назад

Welcome to Honda Cheese bolts. Everytime you plan to takea bolt off toss it and replace with new bolts from a bolt shop

@jacobgrodis1076 Год назад

Was it a air noise when compressed that made you send it back? Mine makes a air compression size when sat on and I just installed it.

@JoakimGulbrandsen Год назад

What is the range of that torq wrench? 👀

@J41V33 2 года назад

Hey Burch! Are you selling the oem rear shocks??

@LifeOfBurch 2 года назад

As of now, the plan is to throw them on Nina's Rebel 300! I'll let you know if that plan changes though!

@mikesenchy6055 2 года назад

wow cool

@LifeOfBurch 2 года назад

Thanks Mike! 🙌🏻

@828earl Год назад

How does thd length of thd new shocks affect the usage of a centre stand?

@josephsaia5527 Год назад

8 months and no answer? I just asked the same question for the T-Racing centerstand? I guess I might not get an answer.

@SynMonger 2 года назад

Makes me wonder if those bolts are torque to yield and need to be replaced after each tightening.

@LifeOfBurch 2 года назад

It doesn’t say that they are, but who knows. They’re cheap enough that if I were to do this again I’d probably get all new ones just to be safe.

@feloniousmonk3049 Год назад

@@LifeOfBurch You SHOULD put all new ones on all 4 plus new ones that you took off of Nina's on her bike too.

@Dagnis8 2 года назад

Just curious, but does this affect the weight limit of the bike? I'm thinking about getting my License and getting this bike as my first bike. However, I'm a bit more heavy set (280ish) and that sort of rules out any passengers since I think the limit is what, 350?

@LifeOfBurch 2 года назад

Hmmm I’m not sure honestly 🤔 I don’t know enough to say for sure whether suspension is the only thing that dictates the weight limit. I’d assume you’d, at minimum, want to swap out the fork internals to handle the extra weight too. But past that, I couldn’t say what all Honda based that number off of.

@Dagnis8 2 года назад

@@LifeOfBurch Good to know there might be more too it. I guess it gives me more incentive to work out and lose some weight lol. So did you end up order replacement bolts for your gfs ride that you took? are they stronger then the Honda ones? Oh, and is your rebel a DCT?

@leafinley6361 Год назад

Hi Burch, Do you still love your shocks? How do you think they would work for a lady rider, about 135-149lb with gear, 29inch inseam?

@larifari4371 5 месяцев назад

Above one states you should at least bring 180lbs on the seat. Did you try it despite you beeing lite?

@leathaelsdon9438 5 месяцев назад

Hi, no I bought installed YSS adjustable shocks for the rebel 1100, bought them from a supplier in the Netherlands. It's been about a year since I installed it. They are way better than stock for sure. I have seen a few videos that installed Ohlins, there is a channel, I think on the rebel, he put Ohlins on, his vids are very detailed, a little long but very informative

@leathaelsdon9438 5 месяцев назад

The channel is On the Rebel 11. The guy on the channel says he's 5'-8", probably around 155lbs. I didn't watch all of his vids on the Ohlins since I already had mine. I do like the yss shocks, but the bike is still a cruiser and if the road is bad your going to feel it regardless of the shocks IMO. Before buying anything I would check if the shocks can be purchased for a lighter weight person. I did not do that when I bought my YSS shocks. I think the higher end shocks do come in different spring weights, good luck. BTW, I have back issues, hence the upgrade. I'm pretty sure my YSS shocks adjustments are not maxed out, except I do have them almost as tall as I can, better for my hips. Good luck!