The Charlie Show /// Episode 217 /// Justock G3 - First Look - Setup 

I really hate external power switches 🤦

If only they'd used an integrated switch..

Perfect! I’m totally new to 1/10 and about to receive my first motor/esc combo and need to solder it all together. Great clear instructions and information. Thank you 🙏🏼

Your explanation is too fast, especially you need to slow explain the plugging of Sensor cable as it is very tiny, and a bit too hard to plug this sensor cable. Also, the calibration process you explain is too fast. Maybe you can explain it more slowly. Thanks.

Have you done one of these for the G4? I've got most everything dialed but I've got a weird boost that comes outta nowhere, like if im on the throttle 3/4 of the way on a short straight all of a sudden she rips, but then when I round the corner and line up to the next jump there's no balls to when i get on the throttle to clear the triple? Any ideas? Cheers

Is this truly enough for 17.5 2wd buggy racing??

Just about to get back into this hobby after 10years of retirement. This video is very informative as a refresher for me

best solder video I have seen in a good while. Thank you!

So you can’t change mode without a programme box?

Looking at purchasing this for my associated 6.3. Would it be a wise choice?

Thanks you 🙏🙏🙏 i lost my hair figuring out the initial calibration of the just stock, thank goodness i watch your video👍🏻👍🏻👍🏻👍🏻

No turbo and boost?

Just picked this up

Hi about Program cards. I have a lot of Hobbywing ESC from the olds XeRun (the blue ones) to EzRun Max5. I never use programs card. But now I search for one. Has one model who can be use in all the cars ESC line from hobbywing? Or is need to buy more than one?

I bought the 17.5 fixed combo. Put it in my RB10 RTR and it was way way slower than stock. Buddy at the local hobby store tried multiple gear combos and nothing worked. Couldn't clear any jumps it was very slow. Any Ideas? Was very disappointed and ended up putting the RTR stuff back in. At this point I have a $120 paperweight sitting here.

Heyy hobbywing 👋😃 Should i buy a quicrun 10bl120 or the xr10 g3? Its for a 1/10 rally kit

Hello, I have the same ECS, which program card are you using? Thanks

Can this speed control work with a motor with adjustable timing

This is a AWESOME video....mine is due in any day now....vta racing here I come

Could you show us how to use the program card on the older version

Could i use a 3s lipo with this even though it is a 2s device?

How does the voltage protection work if it does get reversed?

Hi, I want to buy Hobbywing Ezrun Max10 Sct Combo. Hobbywing products listed in Chinese website like Aliexpress, Banggood are counterfeit? Not genuine?

Is there a performance advantage with the G3 juststock speedo over the older G2 juststock speedo?

Great job on this detailed look at the XE10.

Is the programer specific to Hobbywing? Which one are you using?

Como se modifican las rpm??

👍👍👍

I just purchased the XR10 pro elite and wanted to know is it normal for wires to be so hot? No prep application 3T motor, 5100mah 130c battery, 87/18 gearing

Got the 17.5 combo as the rules said I had to have.. so slow that I wire it open and watch it like a model train set!..

Will we see data logging graphs to see different parameters over a whole run rather than just max values in the future? Looking to get the XR10 Pro G2 for no prep but it currently doesn't offer this. function

Would this be a good choice for a 4tec drift car?