The cheapest way to go fast: Shrimp rigger DIY RC boat build project! 

@H2oMechanic2RC Well deserved, you got some.serious performance out of your shrimp rigger 💪 Building 2 left / right sides happened to me before as well 😅

Thanks, I appreciate it! I'm making some mods on this one, so it will not be the average Shrimp rigger!

Thanks, Dim! These are going to be 3 awesome little speed machines 😎

⁠Thank you so much for the giveaway present Jan and for your nice and kind words! You have been inspirational for so many hobbyists around the world and for me you have the most genuine yt rc boat channel which is based on the true spirit of rc hobby, ie sharing your knowledge and help other hobbyists enjoy this awesome hobby!

Thank you, Dim 🙏 If you love what you do, it's not hard to be enthusiastic about it. The video making and community communications became part of the hobby, and I really enjoy that, too!

@AdamEverythingRC That's a great speed for 3S, nice job! I use a lower kV motor, but who knows what I will end up with. ✌️

Thank you, I was planning that already! And I will narrow the sponsons with 10mm, too.

@@CozyRC Dont forget to add a turn fin.

Thanks, I won't! I will add some reinforcement in the sponson as well, before I close it.

Nice! What setup are you planning to run?

@@CozyRC Have a smaller, high amp motor with a 150 ESC and a 4S LiPo i am trying to squeeze into it. Have to change several of the mount points to get everything to fit. Considering creating the ski-box under to cover the prop shaft.

​@@gabrielbedient7587Sounds good! I'm going to add the ski as well, and I narrowed the front sponsons for less resistance. Part 2 will be uploaded today or tomorrow ✌️

You're not messing around with your setup! Sounds great, but be careful ot to overstress the setup or boat. Looking forward to your video 👍

Thank you for your recommendations! It's great to hear that a 3000mAh lipo might fit with a hatch mod. I will definitely consider it, as well as the carbon servo mount 👍

Awesome! What kind of setup are you planning to install?

I am 62 years old and new to boats so I hope you don't mind but will probably copy your setup. Normal I fly sailplanes. But I need a change of speed to keep me on my toes 😂

I posted in your last video about doing a rigger. So this is brilliant thanks again for your channel and the time you put in to it

​@MichaelLing-bz4yq No problem at all, that's why I added the parts list in the description! Enjoy the build, this rigger will surely be fast enough 😅

I'm glad you like it, and I appreciate your kind feedback!

Well deserved, Daciu! You're one of the biggest RC boat lover I know 😄

​@@CozyRC o man the sound make all the magic on me, special the twin sound😊

I know what you mean! So nice to hear the aggressive high pitch noise of a twin drive boat flying on the water 👌

How did you manage to blow the prop shaft? I use the big far East website for almost all my parts. The video description contains the parts list of the hardware that I will use. ✌️

@@CozyRC The prop shaft came of the flex cable, that stayed with the boat but the prop, shaft and bushing are in the lake... Thank you and I will check out your description 👍🏼

Hi Vinnie, yes I know. I got these in my Mini Mono. I went for the 80A, so I can run large props.

@@parkourrush3820 Nice one, Mylan! Is it also a Shrimp kit?

@@CozyRC yes it is the b068 gona be overpowering this one with a rocket 3450kv 2948 on 3s and maybe on 4 but i will maybe make a turn fin on it if the friend would like to but nog necassary

If you want to run ovals, you need a turn fin for sure. For just speedrunning, you can take it off. I will add a turn fin, because I want to run it in the small pond and set some fast laps 😉

@@scaleworksRC ironclad rc has a 70mph shrimp rigger of this size

Nice goal! The JAE FE33 would be a great choice.