No video :(

The Complete Setup Guide for Zhiyun’s Image Transmission System

Подписаться 40 тыс.

Просмотров 151 тыс.

50% 1

Here's how to assemble, set up, and update firmware for the Zhiyun transmount wireless image transmission system. The modules include the transmitter, receiver, motion sensor remote, transmount max and lite motors, as well as the quick-release pucks. Zhiyun's Wireless Image Transmission System is amazingly affordable. Knowing how to set it up and use it, is priceless.
GEAR in this episode:
WEEBILL-S Gimbal: bhpho.to/2p4ZqaZ
Wireless Transmitter: bhpho.to/2wpamn3
Wireless Receiver: bhpho.to/2SxmDye
Motion Sensor Remote: bit.ly/ZYremote
Phone Holder: bhpho.to/2olzesd
Transmount Max: bhpho.to/2WisdVB
Quick Release Plate (2 Pack): bhpho.to/2SRBWkn
WEEBILL-S Image Transmission Pro Package: bhpho.to/329M508
Let's connect - / garrettsammons
I made these for you - sellfy.com/garr...
The music I use fm.pxf.io/garrett
// #zhiyun #weebill-s #imagetransmission //
*This video is not sponsored and all opinions are my own. Some of the links listed above are affiliate links that I earn a small percentage from qualifying purchases. Any affiliate links you use helps me create new content and costs nothing extra to you.
Welcome to Making Movies with Garrett! Learn tricks of the trade, discover new gear, stay up with filmmaking trends, dive into how I pull off cinematic looks, and so much more.

Опубликовано:

16 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 456

@siramods 3 года назад

Important correction: to update firmware on the Receiver, the USB cable must NOT be connected. A Receiver without updated firmware connects to the Transmitter over Wifi, but will only show (in my case) a white screen with the Zhiyun logo. With the cable connection, the wifi sync does happen, so it's a mandatory first step, but in order for the app to show the Receiver update, the cable must be removed, and only the wifi connection must be active. Otherwise, fantastic video - helped me A LOT - but this small detail ruined me the best part of the day. Of course, I should have read the received manual better first. Cheers.

@garrettsammons 3 года назад

Pinned this comment. Thanks!

@mikesuminski 3 года назад

This is strange, because my reciever update was only shown in the app, when I connect it with the cable to the transmitter.

@davemorgan2850 3 года назад

i read this after i spent 30min trying to figure it out. I'm glad i saw it because to be honest i wasn't sure what it was i did differently to get it to work.

@siramods 3 года назад

@@mikesuminski strange indeed. good to know

@Patrick-jj5nh 3 года назад

thank you this has been a huge help, for anyone on android i only managed to update firmware on an iphone.

@pacoanselmi8886 4 года назад

This is a masterpiece of review/tutorial

@CSSC0der 4 года назад

Agreed

@garrettsammons 4 года назад

Thank you!

@vinzaputra 3 года назад

the explanation is very clear

@pastlifeliveinterviews9221 3 года назад

i was thinking the same thing. ill start slow....

@Greego 4 года назад

Man, this is one of the best tutorials I have ever had the pleasure of viewing. I never subscribed to a channel as hard as I just subscribed to this one...your attention to detail and awareness of explaining detail that others do not even consider is impeccable. I think you should win an Emmy!

@garrettsammons 4 года назад

You’re too kind! Thanks so much

@peterdepra 3 года назад

Possibly the best scripted and best-presented video - on any topic - I have ever seen on RU-vid. Excellent job, thank you.

@peterdepra 3 года назад

I cannot find any source to buy the receiver unit. Any ideas, please?

@garrettsammons 3 года назад

I use B&H here in the US

@colleenmeas1996 3 года назад

You are one of the best and most informative creators on RU-vid, no fluff or flexing, just easy to follow, no bs information in a visually pleasing format. Keep it up!

@garrettsammons 3 года назад

Thanks Colleen!

@LorenzoHines. 4 года назад

This was a quality video. Love your shots too, real clean... Very informational on this.. I have this gimbal and have had issues with the connection to the transmission module.. you may have resolved that issue with mentioning the usb port..(thanks for that).. Also, i think im going to pick up that wireless reciever and set as well. Such a great set-up. could see a lot of diff. uses out of that... not to mention looks pretty awesome as well.. Love the content!

@garrettsammons 4 года назад

Thanks Lorenzo! Yah man, that USB connector messed me up for awhile too. It’s such a solid setup! It works so flawlessly, just a couple of the initial understanding points aren’t super intuitive.

@MichalOlender 4 года назад

Garrett, you saved my life here! I'm on 5DM4 and the issue getting the transmission going was making me crazy. The right cables was the trick, something the company or other videos will not let you know. Thank you!

@garrettsammons 4 года назад

It drove me nuts until I figured out that USB deal. Definitely not intuitive.

@Myck1977 Год назад

Best video of all Zhiyun's transmission! You are the best! Thanks for all!

@gillesmatheronpro 4 года назад

Such a review ! I've seen a few (well, thousands... truly) and not even 15% are that sharp, concise, accurate, helpful, meaningful, etc. Great work, well done... folks at Zhiyun should offer you a round-the-World trip for your service and user-friendly attitude. And take exemple as well. Some other folks from other brands too (nobody's going to be surprise when reading this and some should agree with me). Customer services sometimes have such poor global quality of (non-)service, it makes you want to sit down and tell them : "OK, take back the device... I'm having some time on my own to shed those tears. Then I'll be calling my mom." lol

@THEREALSRY Год назад

Omg seeing you plug into the left side of the 3.0 just solved all my issues. You’re a legend

@garrettsammons 4 года назад

TABLE OF CONTENTS Transmitter Setup 2:00 Focus Motor Setup 4:48 Transmitter Firmware 7:10 Receiver Pairing & Firmware 10:50 Receiver/Monitor Setup 13:21 Motion Sensor Remote Setup 18:35 Motion Sensor Remote Firmware 21:00

@Engeyarrakazehbi3456 4 года назад

Hee #Garret Sammons. does it works with the bmpcc 6k and the zhiyun crane 3s Pro. Please Let me know :)

@ChadWatkins 4 года назад

I’ve watched your video and I’m wondering will it transmit a red scarlet w signal to create a cheap follow focus system?

@garrettsammons 4 года назад

I think this won’t have a heavy enough payload for that camera rig. If the Scarlet has HDMI out, you could probably use it, though there are cheap wireless transmission systems that might perform better as standalone units.

@garrettsammons 4 года назад

This system I believe is weebill specific but I’m not sure.

@goochthegrip 4 года назад

does that same motion control unit work on the Crane 3? I'm trying to find out for certain but nothing I seem to find says or doesn't say definitively. Any info helps.

@FerrisFilms77 2 года назад

Dude! Intense video! You are on another level to get this info in here so fast and smoothly. Nice work ! And thanks a ton!

@AdventuresThings 3 года назад

Dude I could have easily watched another 25 minutes of that. Great work on this.

@wyoder9511 4 года назад

I can not even begin to explain how amazing this video is. I never sub to people before I actually watch and enjoy their content for a while but this is the first video of yours I've watched and I'm subbed. This was amazing thank you

@garrettsammons 4 года назад

I’m honored! Thanks so much 🤙

@Chardhousemedia 3 года назад

Boy, this is proving hard work to set up. I found that to get a picture on the monitor - once the transmitter/receiver are talking - you have to double tap the power button on the receiver to get the picture up or you just see the whie zhiyun screen. I've had no luck so far with the remote handle operating anything at all. I'm using the 3S by the way with the zoom/focus motors and the BMPCC 6k. I wish there were more troubleshooting videos for those for whom it doesn't seem to work straight out of the box!!!!

@Jalbk 3 года назад

Double tap the power button on the receiver to get the picture up... Thank You, thank you, thank you!!!

@geekazoid 3 года назад

You got my sub because I got more useful information from this video than every other Weebill S review. 25mins watched it all.

@LeoMaverick 4 года назад

Best guide I ever watched in my life

@garrettsammons 4 года назад

Thanks Leo!

@LeoMaverick 2 года назад

@@garrettsammons one more simple question: can you pull the focus from this remote controller? I'm using Blackmagic pocket 4k and I don't want to pull the focus with this external focus puller... I mean.. you know there are some apps like Bluetooth+ that allows you to pull the focus without using this focus motor... My question is: can I pull the focus without using this external focus motor?

@LeoMaverick 2 года назад

@@garrettsammons I'm talking about electronic lenses with focus motor!!

@MAD_Media 4 года назад

You don’t need to bypass the gimbal connection and launch from the transmitter app... I always follow these steps and works just fine for me every time: 1) Power on the Weebill-S 2) Power on the Image Transmission Module (default is 2.4G or last setting - quick press power button 3 times after powered on for 5G wifi) 3) Power on the camera 4) Launch ZY Play App, connect to gimbal - once connected it will automatically bring up the connect to Image Transmission Module That’s it!! You have camera control and video feed. 5G Wifi mode seems a little more stable and less lag.

@garrettsammons 4 года назад

Right on dude!

@UTCM 4 года назад

They ve told me it only connects to 5g . I ve tried on 2.4 for a couple days now wont connect

@MAD_Media 4 года назад

Unseen Thailand Chiang Mai - I had issues where my iPhone Xr would not connect in 2.4GHz WiFi unless I disabled Cellular Data, but even then I still had issues with laggy image feed, freezing, and losing connection all together... When I found out about 5GHz WiFi mode, I switched to that, and no problems since - remember, press the power button 3 times after it is powered on, the Green LED will flash intermittently 3 times to indicated 5GHz WiFi mode is now active - it will stay in 5GHz mode each time you power it up until you change it back

@UTCM 4 года назад

Thanks I ll try doing that and see how it works

@UTCM 4 года назад

I just tried it wont show in my wifi 2.4 only 5g it shows on my tablet the wont load zy play haha

@natetheartist9 3 года назад

Awesomeness.. I was caught between purchasing the Weebill S or the Moza Aircross 2. My concern is payload, functionality, and travel friendly. I was leaning more toward the Moza because of the wireless option offered. However after viewing your detailed video I had know idea the scalability gimbal has. Excellent options to expand film my film and photography needs. Thanks for taking time to create and share this ... I'm looking forward to seeing more. You've saved me time and money!

@AnthonyDawsonPhoto 4 года назад

Been looking at gimbals for a long time looking to do video projects. Think this may have sold me. Thanks for the informative break down!

@garrettsammons 4 года назад

Glad it was helpful!

@Hoffpauirdds 3 года назад

Thank you so much for making this video. I am new to the whole cine world and I was super confused as to how to make this work correctly.

@burhankunda_ 3 года назад

This is one of the best detail video I ever see on RU-vid......amazing stuff

@garrettsammons 3 года назад

Glad you liked it!

@NatalBeatle20 2 года назад

Not me with a Nikon D5200 not being able to use any of this but still enjoying the video lol. I just do everything manually with the gimbal controls and have to look at my live preview on my camera

@uniquesubjects Год назад

Thank you for the detailed tutorial, this definitely made my setup process much easier and successful!

@blackholemedia2014 Год назад

how is your latency?? mine is terrible. focus puller is very LATE with this transmitter and receiver.

@uniquesubjects Год назад

@@blackholemedia2014 It’s pretty good, I haven’t officially used it on a shoot but testing and getting familiar with it around the house seems to be working as it should. I was having issues with connecting my phone to the app but I think it was something I was doing wrong probably rushing. The last few times I was able to connect without issue.

@blackholemedia2014 Год назад

The latency tho , the reaction time between you moving the camera and it moving on the receiving monitor. Mines is about 2sec which is TERRIBLE!

@uniquesubjects Год назад

@@blackholemedia2014 Wow yeah that’s Doo-Doo man! Mine isn’t like that. I’m just guessing but did you check, replace or have decent quality hdmi cables?

@blackholemedia2014 Год назад

@@uniquesubjects yes updated firmware and fully changed . Still about 2sec late on the focus puller

@Kycade 3 года назад

This was the most helpful video I’ve watched on this piece of equipment. Thanks.

@garrettsammons 3 года назад

Glad you found it helpful!

@pepemlumbreras 4 года назад

what a perfect video! I will take this to make my own camera crane!

@garrettsammons 4 года назад

Have fun!

@Incacal71 4 года назад

I didn’t know you can plug-in a micro USB cable to the multiUSB port on the transmitter. Thank you for that explanation! I was literally pulling my hair out trying to figure this out.

@garrettsammons 4 года назад

You and me both!

@ubiFire 4 года назад

This is EXACTLY what I was looking for. Thank you.

@garrettsammons 4 года назад

Glad it was helpful!

@MohiniUfeli 3 года назад

LOVE this video. Have subscribed. Looking forward to coming back after my transmission module's delivered. Thank you for creating! 💛

@ChrisWoodcox 4 года назад

Great video G. Informative and well delivered. I've recently purchased the receiver to pair with the Weebill and my new Sony a6600. I'm quite excited to get the system up and running. Still waiting for the mini HDMI to arrive which will complete the connections. Fingers crossed. Thanks buddy.

@garrettsammons 3 года назад

Glad it was helpful!

@MoorishMade Год назад

Thank you Garret!

@HardIsEasy 2 года назад

Now this deserves some serious thanks! Would this be possible with Crane M3?

@albertoflores3688 2 года назад

Wow subscribed for the value provided

@YounusYousuf 4 года назад

Thanks a lot Garret. Your tip for using micro usb over micro B port saved my day. No ! Saved my week. I was trying to setup 5d Mark 3 and 50mm lens on weebil s and it was nearly impossible to find mini usb to micro B connector. Before watching your video i was setting up with some OTG setup and finally when it comes to balance the setup for the last axis, the micro B big end was hitting on the gimbal. So i was thinking that these guys who made these gimbal probably never thought about these issue with image transmission module. Then I found your video.

@garrettsammons 4 года назад

So happy to help Younus!

@Glen.Danielsen 4 года назад

Outstanding and helpful video, Garrett! Thanks so much! 💛😎

@garrettsammons 3 года назад

You're so welcome Glen!

@geekazoid 3 года назад

Excellent demonstration and quick guide.

@garrettsammons 3 года назад

Glad it was helpful!

@teilom.lwandeaj1947 2 года назад

Sweet. Enjoyed watching your video n I “picked your brain” on a-lot of cool stuff.

@waltertissen5910 3 года назад

Thank you very much. Great Video.

@fish00123 4 года назад

Best Zhiyun tutorial! Thank you so much for your hard work!

@garrettsammons 4 года назад

Glad it was helpful!

@didimiorios3781 3 года назад

Just an extraordinary setup guide, thanks for share.

@thecreativelooksbymohan6785 3 года назад

Thank You so Much for Making this video. Its Helps Really really a Lot.. Keep making such Videos, Will be waiting for the next videos. Thank You...

@sierradaniels7072 4 года назад

Hey thank you, I was really on the fence with this one!!! Gotta buy it now

@garrettsammons 4 года назад

Glad you found it helpful Sierra!

@IslandFilmMaker 4 года назад

Love this tech! Very complicated & I worry as there's a lot to go wrong to get this paired and working. It needs to be simplified, 'll wait for the next gen! Thx

@garrettsammons 4 года назад

You and me both!

@etchd_ 4 года назад

Amazing work mate! So detailed and clear!

@garrettsammons 4 года назад

Glad you found it helpful!

@taghappytv 4 года назад

Nice breakdown / review. Best yet. Keep up the great work!!!

@garrettsammons 4 года назад

Thanks, will do!

@mcbc5193 4 года назад

EXCELLENT Review! Thank you! Smoooth, creative video and you offer excellent insight all around! Greatly appreciate it! All the best!

@garrettsammons 4 года назад

Appreciate the kind words!

@mcbc5193 4 года назад

@@garrettsammons Hey what's up Garrett, thanks for the great videos and tutorials, all around! A quick question on this setup for you --> Are you familiar if the wireless image transmission system would still work smoothly if the camera already has an external monitor directly mounted to the Weebill S, by chance? I currently have the Weebill S with a Ninja monitor connected to it. This is for recording along with a visual view while filming. Any idea if this would still work if I add the Image Transmission System with the remote attached to a second monitor? The goal would be to film with with a camera and monitor on the weebill s and then have a friend also viewing or adjusting the focus or angle from a transmission system and remote setup. Or possibly having the just the transmitter mounted to the camera and then use a cell phone to have a friend viewing the footage as its being recorded? Thanks for the insight!

@najmi.d 3 года назад

very great in-depth video. didnt notice it's 25 min long haha

@ConneryDavoodian 3 года назад

thank you. amazing video

@olr_vancouver 3 года назад

How look like image quality?

@belichterdonborek7593 3 года назад

Not exact motion controll. There is a huge delay from wha I see in the video. Has this something to do with how the gimbal was configured or is this the 60ms dekay of the image transmition system ?

@drumndirty 2 года назад

Great video! Any way we can access an option to send different resolutions to the iPhone for monitoring?

@LazarSoljaga 3 года назад

You are using the exact video monitor i was planing on getting. If i where to use a cage for the monitor would the Video transmittor be able to screw in. Witch cage would accept the transmittor with out having to use your mounting method

@Prolike136 4 года назад

Love the quality of the video. Great explenation also. One Question: Can i pull focus from the phone?

@garrettsammons 4 года назад

You can! There’s a standard amount of latency for HDMI and WiFi, but it isn’t enough to be critical. That said, super fast motion and things would lag a bit.

@TomMariano69 8 месяцев назад

Garrett, can I transmit to a monitor and not our phone so the director can watch the filming?

@rathitthisarathulwan4812 3 года назад

helpful video, Garrett! Thanks so much!

@cinematographers 3 года назад

Great tutorial! Just connected the Crane 3S. Everything works but the focus controller. Do you have any tip on that? Thanks!

@MikiSimans 3 года назад

Also having this issue!

@TommyGunsDunleavy 3 года назад

I would love to see how smooth some B roll clips look when shot remote with movement. Has me curious

@Utsab_Giri 11 месяцев назад

Thank you for making this video! How do I get Object/Face Tracking? I have a Crane 3S. Thanks!

@parkerbaldwin8532 Год назад

HELP! I've seen lots of Zhiyum transmitters offered for sale on the internet, but I am unable to find the Zhiyum Receiver. Where might I obtain one? Any ideas out?

@lp8102 3 года назад

101 moving parts...dang. Alot going on...Great video

@ryanhines8966 3 года назад

You... You made everything work. Thank you.

@marinakalashnikova5212 3 года назад

Hi. So what if one film director or the key camera man is in another city, could they control the device from there through their iPad and actually start recording and taking a picture from there?

@johnny7166 3 года назад

this setup is crazy, howver how many cameras are compatible with this complete setup.

@jdfpv1998 2 года назад

Thanks a lot for the video. Way more understandable and well made than the offical Zhiyun videos! I juts got one question though - why is the receiver and the handle not available anymore and will it come back? I mean its nice to see the features but currently you cant buy those parts to complete your gimbal setup :/

@malitoff 3 года назад

Hi Garrett, I took a quick look at your other videos, however I didnt see a Zhiyun transmount wireless image transmission 2.0 review, have you used/reviewed one ? If not what have you heard about this device :) Thanks Steve

@jcalbadan8742 2 года назад

Thank you amazing detailed video

@norkin4life 3 года назад

Thanks for being so detailed

@eduardoherrera2487 2 года назад

good after friend, first of all I would like to thank you for such great videos you put out on your Chanel, specially the one of how to set up the Zhiyun gimbal. I purchased the Crane 3S pro kit a few days ago but unfortunately I haven't been able to find the wireless receiver. By any change do you know where can I find it. I would like to add it to my new set up but amazon is not selling it anymore or B&H. I will appreciate if you could guide me to where I could purchase it. Thank you. Keep up the good work.

@AnimusNitra-X Год назад

Is there a stick for crane without sensor moving for controlling it by the cameraman himself with a joystick?

@AllAmericanImages 2 года назад

Great video, any idea if the Crane 3S with wireless transmitter can be connected to a Canon C3000 Mark II

@infinityphotorob 3 года назад

I just set this up and my pan does not seem to be moving more than a few degrees. What am I missing? It has to be something easy.

@squirrelmusic8909 2 года назад

awesome video, so much so I bought the whole secondary setup for remote focus, pan etc. Quick question though, I didn't see the cables that were used to connect the zhiyun receiver to the feelword f6plus and I assume the second cable is micro USB to micro USB to connect the receiver to the remote? Any help from anyone would be appreciated :)

@kreativecircle 2 года назад

I have a question. I just bought the crane3s pro and it comes with the image transmitter but for the life of me I can’t find the receiver no where online. Only the image transmitter. When I googled crane3s image receiver it says it’s discontinued

@In3briant 3 года назад

For some reason it’s saying “no internet connection” in yellow writing... I can’t connect.. the transmitter has a blue and green light on.. Any ideas what I am doing wrong??

@bosskaloi 3 года назад

Does the remote has a joystick? So u can use it to control pan, tilt and roll of d gimbal if using it as right arm holder of a dual hand rig? And no need to move it around?

@just-felix4766 4 года назад

Me: sees intro Also me: Like

@DronoTron 2 года назад

This is great. Can you adjust focus from the app? Or you will need the remote for that?

@jackmerrick78 3 года назад

can you not connect the phone as a monitor even without the transmitter?

@davemorgan2850 3 года назад

Right! I'm on the program now. Got the motion sensor remote. Just need to figure a way to keep the remote and receiver charged all day. Is there any way to keep the remote charging via powerbank while in use? It looks like the only way to charge it is the same port that needs to be used to connect it to the receiver. Perhaps a split cable could be used to connect the remote to the receiver and also to a powerbank? Amazing video by the way. Has helped me get this thing working exactly as intended. There are just so many things to keep charged on a full day shoot. If you have any tips for this i'd love to hear them.

@antv1286 3 года назад

can you use the Zhiyun remote controler on the crane 3s without the transmitter receiver so only to operate the crane wirelessly

@brian6622 3 года назад

I had everything updated latest firmware, all connection are working, but the record and controlling the setting from motion control to my Sony A7SIII is not working. Anybody find a solution?

@tomliddell8487 Год назад

Hey Garrett, awesome video. Just wondering do you have to use the specific zhiyun transmitter and receiver for the motion control to work? Thanks

@PeterLindgren1 4 года назад

Appreciate the video man, helped me get a hang of transmitter system. Haven't gotten it to work yet but i hope i will soon haha!

@garrettsammons 4 года назад

Let me know if you get it working. My issue was always with the USB connection cable not being the smaller one.

@Belmondo2013 Год назад

Hello. I want to get the WEEBILL-S pro package, but I can find a Image Receiver anywhere, is it discounted or sold out ?

@guitou 4 года назад

Fantastic Sharing~~~~ very detail and very informative!! Great!! and keep it up!

@garrettsammons 4 года назад

Thank you! Cheers!

@Nickporter17 3 года назад

Awesome and helpful video! But I have a problem, can you please help? My camera display goes black when the image transmission module is connected and the camera is set to manual photo. My camera is a Sony a7iii. I'm shooting photos in a studio on a tripod and using the transmission module as a standalone without the gimbal.

@johnnyray5515 2 года назад

Hi Garrett. Great video. Thanks for making this. However, it seems the receiver is no longer available. Even on the Zhiyun website. Did they discontinue it? Do you have to have 2 transmitters now? Did they replace it with something else?

@rikideckard 3 года назад

I have a Sony a7sIII and a Weebill-S and the smart tracking doesn´t work! The image is displayed with a delay of several seconds. I have a Iphone 6, does anyone know any solution?

@fafasogamer6320 3 года назад

This was fricking amazing broooo

@TitanEntertainmentvideo 2 года назад

Will it work if there is no internet connection? There are many times we shoot in remote locations with no internet.

@gereral1_jackofalltrades 3 года назад

Does receiver output 422 10bit so you can record to ninja atomos recorder?

@In3briant 3 года назад

Canon SL 1,2 & 3 plugs are on the opposite side which sucks bc it won’t reach and I used different cables and they are in the way, just so people know before they buy if they have ports on opposite side

@lighthackerslimited Год назад

Quick question.. Will the remote handle and receiver work with the newer Zhiyun TransMount Transmitter Ai on the Crane 3sPro. They have released a MasterEye unit (all in one) unit that looks great BUT at only 1000nits I prefer my Blackmagic 12G Video Assist or Fotga monitors, both having brighter 2500nit screens. Plus the remote handle you showed here have a better ergonomics grip than the newer and smaller MasterEys unit. Thanks

@wlarue 3 года назад

Congrats on a great video! Very well done. I have one question: If I wanted to grab a signal from the system and feed it into a multi-cam device like a Blackmagic ATEM Pro Iso, where would I make that connection? I'd like to keep the ability to use movement control, but I think the ATEM would want to hog the signal.

@zakk-kaye 3 года назад

Hi can anyone help? I have a panasonic G80 and have been trying to set this up. I know it's not compatible for wireless camera control, but I thought the wireless monitoring would still work as it has HDMI out, can't seem to get it to work. Is it just not compatible at all or am I doing something wrong?

@Irolka177 3 года назад

did the controller getr recalled? I cant find it anywhere online. Im thinking of getting the crane s3 but I wonder why I cant find the wireless transmitter/controller? A lot of youtubers advertise the crane with the controller as a duo.

@jaylopezproducer 2 года назад

Hello friend, thanks for the video, I have a question and I will be immensely grateful if you can help me, the receiver does not give me an image, on the contrary it gives me a pink color (I clarify, I do not have the screen

@alexkay4170 2 года назад

No matter what I do I just can't get the control of the gimbal over the transmission system. Either I conncet to the gimbal and I have no image, or I connect to the transmittere and I have a video but no controls over the gimbal. So I guessed the transmitter isn't connected properly but, it is. It even tried different cables... any suggestions please?

@squirrelmusic8909 2 года назад

Hey did you get this sorted mate. I've just had 24hr deep dive into getting this to work.. I have a small issue but for the most part it's all working.. Reach out if ya need help?