Visit my Amazon Storefront for garage door parts and more www.amazon.com/shop/weldingandstuff/list/38F5CD0NISCMC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_7MYGWGEQK738604C1R1J
Well done sir. I specially like the phrase “ these instructions are wrong”. Been working on this project for several hours and your video is the only one that solved the problem. Keep up the good work.
God bless you my friend for being the only one who correctly shows how to program the keypad. After floundering all afternoon with lots of "advice," you showed the way!
I cannot thank you enough!!! Saved me from calling someone to come out and fix mine. The other videos were not helpful at all, too much yapping and so confusing. Yours was so simple!!!!
My keypad and three remotes have never all worked at the same time. The keypad hasn't functioned properly in over a year. I watched every video I could find and nothing worked for my keypad until I found your instructions and followed them exactly. Many thanks for sharing.
Thank you soooo much for your video on the garage keypad! I looked at many but only yours worked for me! As a single woman I am so happy! God Bless You! ❤❤
Omg!!! THANK YOU!!! After struggling for over an hour with instructions on the remote and being unsuccessful, I watched your video and did it in one minute!!! God bless you!!! Thank you!!! ❤
Well, thank you very much for that video and the. carefully thought out instructions that went with it. I had just spent over an hour trying to use the direction. that you obviously didn't have any luck with And I gave up on that and found your video and the whole thing took me about 15 seconds. You're a wonderful human being for putting this up there. THANK YOU!!!
I won't lie, I didn't think there was a chance in a hell this would work with my Liftmaster. I had been trying for days to get the company recommended method to work and was willing to give anything a shot. Will this man's video worked like a charm on the first time...the guy us a miracle worker.
These instructions are still working, beautifully!!!! I had a cat sitter at my house for three days. It looks like she took it upon herself to cancel the temporary 4 digit code I had programmed in the keypad on her final exit. So, instead of changing the 4 digit number, I had to start all over again and program the keypad. Thank you, again, for these instructions!!!
Man, I been trying to program this thing for 3 hours. Followed directions on the manual, the manufacturers youtube, random DIY blogs, and finally I found your video and its the only thing that worked. Thanks!!!!
Thank you for your video. I was having problems programming a new keypad while following all the instructions which came with the keypad. When I followed your guide, it worked the first time. The difference was that in your video you indicated: "Enter and Hold the Enter Button until the light blinks", other instructions said, "Enter and Release the Enter Button" which is incorrect. Other RU-vid videos also had the incorrect instruction.
Thank you so much for the great info. I used the instructions on my old pad, and also the videos from manufacturer and nothing worked. Your video was spot on and I was able to reprogram in 10min. Thank you!!
I spent DAYS trying to reprogram my garage door until I came across this video. YOU ARE THE MASTER!! THANKS! I had the same old instructions that did not work! THANKS!!!!
This guy is right. The instructions in the keypad is totally wrong. I followed what exactly he says and there you go. Thank you so much Mister. You helped me a lot. God bless !‽
Thank you so so much! I had been fighting with my keypad for a week and it’s only a year old! Your instructions are spot on!! Thanks again for saving my sanity… the sound of your voice played a big part too!!🤭🤭🤭😍😍😍👏🏾👏🏾👏🏾
Thanks for this, it is the ONLY instructions that actually worked for my keypad, I have been trying different methods for almost 2 years - problem solved!
Man, this was helpful because my unit has no distinctive "learn" button, just a black and red one. The unit does not say what these are! Thankfully, your video has that in the keypad!! My keypad has the work one in there, too. Now it works. Thanks so much!
Thank you for clarifying the Chamberlain keypad instructions in your video. A couple of days later still trying to program it, out of my frustration with it I returned it and exchanged it with a brand new one, thinking the keypad was probably defective. Then I came across your video listening and doing exactly steps by steps your instructions I got it done less than 1 minute.
Once again you saved me! I found your video after hours of searching the first time. My son and his hunting friends tried to "fix" the opener last night following the printed directions... So it's messed up again. I just sent them a link to your video and I hope they can follow it and fix it again.
I just programmed the same exact opener and you are 100% correct. I used the instructions on the old keypad and it wouldn’t work but the new instructions, there are no problems.
Just found your video. Saved me pulling out my hair. I couldn't get the code changed. The door would not open with the keypad. Followed your super clear instructions and voila. All good. Thanks so much for the help.
Holy crap. I’ve been trying to do this for 2 days now and couldn’t it to program and I finally came across your video and got it to work the first try. Thank you so much my man!!!
Man, our house built 15 years ago and after following the directs provides to mo end, I thought it was just time to buy another keypad. But this worked like a charm!!!!!
You sir are my idol. After fighting the not so correct instructions that came with the unit, following your instructions instead solved my problem. I am one happy camper!
Hey man, thanks for this video. I was banging my head for 10 minutes trying to figure out the instructions following them exactly nothing worked your video worked first try much appreciate it.
Thank you for posting this video. I was following the instructions on the keypad, and was getting nowhere!!! The key for me was in the final step. 1.) Press the learn button on the garage door opener, 2.) put in the 4 digit code, 3.) HOLD the enter button until the garage door light flashed or I heard a click. Holding down the enter button was what caused the keypad to work. Thank you again for posting!!!!!!
Thanks, so much, I couldn’t get my code to work while trying to follow the instructions on the keypad for nearly an hour! I did it your way and it worked like a charm.
Thanks you Sr. I was going crazy trying to program my remote following the in package instructions, I followed your instructions and like magic, I even set a second code for my second door, I even bought a newone, I'll return the one I bought tomorrow, thanks again.
You just saved me at least another day freezing my butt off in the garage trying to figure out what's wrong with my 6 year old keypad. And at least a day's worth of arguing with the wife. Thank you, thank you, thank you.
Do you know what you've saved me from? I brought in all kinds of experts and handymen to help me but none could figure this out. Your instructions were straight to the point and it worked. Thank you
Took a few tries but I was able to enter a new code since the previous owner had moved out. So far so good! Great advice and well done video. Thank you 🙏
I just got off the phone with Chamberlian. We got my remote to work BUT there is a secret that they had me do that everyone should know. To clear the KEYPAD memory and restart with a clear brained keypad, they had me do the following: - Press and hold the ENTER button for 45 seconds, then release. On some models: Press and hold the ZERO 0 button for 45 seconds, then release. If in doubt, do BOTH. This clears out the memory of the keypad. Then proceed with the above process in the RU-vid video above. This finally worked for me and got my keypad working again. (To recap. no matter what I tried including the above process, my garage door motor lights would never accept the code from my keypad and blink. But all other handheld or built-in car remotes associated no problem.)
Thank you Bro. I was stuck after so many times trying to program this stupid universal remote to liftmaster garage door opener. With your help I finally did.😊
Thanks!!! I was trying to fix for hours!! I appreciate ur video and having the correct instructions!! Needed to press 3 times. Just saved about $100 dollars!!!
Thanks! I just did this and it works much better! I used to have to keep pressing enter a couple of times and it was a pain! Now it opens right away with pin and enter!
Thank you it actually work correctly. I can’t believe they printed the wrong instructions inside the cover. Super frustrating. I did your technique it worked fine
Thank you Sir! We move into a home and there were no instructions on how to change the code. I tried the online manual and other videos with no luck UNTIL I came across yours. THANK YOU!!
I have struggled for so long getting this to work. Your video was perfect. My purple button had faded to brown so that was an extra challenge. Thanks for doing the video!
darn straight. My button is orange, as stated on liftmaster...but button and the antenae are purple. So used your purple instuctions....and it worked!!! Thank dude.
You're the man. I guess I can't follow printed instructions without a video. I have this with the yellow learn button on a Security 2+ from a previous homeowner. Two extra things that helped me: 1. first, from the wall-mounted push-button opener near my door, I changed the settings of the light on the ceiling unit so the light's basically always off. I had the light to automatically come on when the garage door opens and when it detects movement, but during this keypad setup, the light is blinding when you're trying to press the learn button, and you can't tell if the whole process worked if the light is on in the first place, because the light won't flash to tell you things worked if it's already on. I assumed it would beep instead, but mine didn't. 2. I wanted to start my 4-digit passcode with a 0, but maybe that's a bad idea since the 0 number is so involved in the setup. It worked when I didn't start with a 0.
Thank you for these correct instructions, it worked perfectly! Was frustrating that the instructions that came with the keypad failed for our dual keypad opener.
Great video dude. I have the same instructions but I was breaking the steps down according to the window panes in the instructions. So after putting in my PIN and the # I was waiting a second to enter once ( I have the yellow button). Now I Have to figure out how the LJ8900 signals that it's in learn mode.....YOur video made a ton of sense when you walked through it....
Thanks! This was very helpful! I also purchased a new keypad thinking my old one didn’t work: but, after following these instructions, this new one goes back!😂
Perfect instructions, once you find the correct ones. I needed to reset an existing PIN from the previous owners. Your screenshot of those instructions were spot on. Thank you for posting!!
Dude you are a genius. You saved me hours of frustration. How did you figure that out? My keyless pad and Liftmaster were purchased at the same time six years ago. I gave up. Very much appreciate your very clear instructions. It worked my first try. Wow! Maybe me being a longtime weldor we get each other.
Another new fan and subscriber here!!! I can’t overstate how frustrating the keypad instructions were and how great your video is!! Thank you so very much. 🙏🏽