The Countdown Continues! The FJ45 Ultimate Rock Crawler Gets A New Bumper, Winch, and Fenders!

Подписаться 618 тыс.

Просмотров 446 тыс.

50% 1

The countdown continues as Paul hurries to try to make the deadline for the WInter 4x4 Jamboree! Today on the list.......fenders, bumper, and winch installation. 3 steps closer!
Make sure to follow along with us as we build and fabricate cool stuff!!
Get some Fab Rat's Merch Today HERE:
www.thefabrats...
The start of the FJ45 ultimate rock crawler:
The Start to the Ultimate Rock Crawler: • The Start to the ULTIM...
I just found a FREAKING UNICORN!! Should I build the ultimate Rock Crawler out of it? • I Just found a Freakin...
Some might hate me for this! Tearing apart the Ultimate Rock Crawler FJ45: • Some might HATE me for...
FINALLY installing the new motor in FJ-45 Ultimate Rock Crawler-But will it even fit??
• FINALLY installing the...
Will the FJ45 suspension EVEN WORK?
• Will the FJ45 Unicorn ...
Point of NO RETURN! We might have RUINED the FJ45 Unicorn
• Point of NO RETURN! We...
This Custom FJ45 Ultimate Rock Crawler Build Comes With Custom PROBLEMS!
• This Custom FJ45 Ultim...
To Airbag Or NOT To Airbag the FJ45 Rock Crawler, That Is The QUESTION!
• To Airbag Or NOT To Ai...
Cutting And Wedging The Bed On The FJ45 Ultimate Rock Crawler!
• Cutting And Wedging Th...
Cutting Fenders On the FJ45 Ultimate Rock Crawler Build
• Cutting Fenders On the...
I’ve Never Had a Shiny, New Part like this for The FJ45 Ultimate Rock Crawler….or EVER!
• I’ve Never Had a Shiny...
Installing The Custom Exhaust On the FJ45 Ultimate Rock Crawler Build
• Installing The Custom ...
Why Did I Do That While Building The FJ45 Ultimate Rock Crawler?
• Why Did I Do That Whil...
The FJ45 Ultimate Rock Crawler Gets A New Homemade Bumper!
• The FJ45 Ultimate Rock...
New Trans Tunnel In The FJ45 Ultimate Rock Crawler!
• New Trans Tunnel In Th...
Now We Might Be Able To Steer The FJ45 Ultimate Rock Crawler!
• Now We Might Be Able T...
This Might COMPLICATE Things! Will This Wiring Work for the FJ45 Ultimate Rock Crawler?
• This Might COMPLICATE ...
IT'S ALIVE!! The FJ45 Ultimate Rock Crawler STARTS UP, But Not Without A Few Hiccups!!
• IT'S ALIVE!! The FJ45 ...
Final Touches! Seats Are Going In The FJ45 Ultimate Rock Crawler!
• Final Touches! Seats A...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/pro...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@nickh4539 2 года назад

Between the FJ45 and the Nugget, Paul is delivering two absolutely stellar builds. Keep up the great work!!

@stevezozuk9622 2 года назад

I think I have to agree with those nice people who brought the salmon. You are all more than just your average people , your beyond that because you chose to share it all. This isn't some crappy reality show, it's the real deal . You've shared great times and and most graciously shared the hardest times with us. That to me says it all. I don't know you but I love you guys for who you are to us. You deserve to be treated with kindness as we all know you would do the same for us. These gifts are truly heart felt in the giving. Thanks for being all that you are. Take care and we'll see you on the next one. PS super stoked over the FJ looks wickedly fun.

@tjtobin86 2 года назад

I know you you've been working crazy hours to put out this much content. Just know its greatly appreciated and it's so much fun to watch all these builds come together. You guys are the best!

@rpalmer274 2 года назад

I agree

@bleepinjeep 2 года назад

Looking Great Paul! Cant wait to see video of this thing on the trail soon!

@Bleepincolt 2 года назад

It is such a rad build!

@codywest7829 2 года назад

This is my favorite channel on youtube. I love watching the builds. Thank you so much for keeping the content completely clean it really means alot knowing I will be able to watch this with my little boy and mot have to worry. Keep it up.

@treyveston7965 2 года назад

Met Matt and the crew last year on a road trip from Washington to Arizona. Fixing to do another trip in a few weeks and would love to meet Paul. My favorite thing about his videos are the epic little sayings he has. "Might work, might do it again" and "get after it" are awesome. Seems he has so many little quips and sayings that are brilliant and folksy. My grandfather was a WWII tank crewman and inspiration for the movie "Fury". He could fabricate anything in his farm shop outside Rupert, Idaho. Before diesel pickups were a thing, he converted a new `82 Chevy 3/4-ton to diesel with a 5 cyl. Dietz motor. Paul could be a younger version of him.

@redcanyonoutdoorquest6220 2 года назад

Love the show. As a fabricator for close to 25 years, I would like to humbly suggest when chasing those leaking pinholes, sometimes you can take a punch or cold chisel and tap/pound the hole closed before welding over it. Also, with the cutting wheels on your angle grinder, I had one come apart and break two fingers once. Had it come apart in the direction of my face...I hate to think about it. Wish I had known about you all last year and I would have stopped by on my way to the elk hunt on Cedar Mountain. I often drive through Glendale. I grew up in Churchwells, down near the Paria and Lake Powell. God Bless and thanks for the great videos. Lee.

@davidsherman5222 2 года назад

Don't forget to put a condensation drain plug on the bottom.

@TrevorDennis100 2 года назад

And make it really easy to undo and drain so it will get done regularly, and not be one of those round-tuit jobs. One of the compressors I use is buried beneath two welders and a plasma cutter, and it is a PITA to get to the drain fitting, which means the first time you use the air gun, you know for sure it is going to blow rusty water. I plan to extend the drain to where we can access it, but so far I have not been able to remove the fitting from the tank. Why is life so hard sometimes? 😒

@aaahtex902 2 года назад

**THIS MAN = ABSOLUTE GENIUS!!!** **A UNICORN AMONG GOOD MEN!!!** **GOD BLESS PAUL & HIZ COMPLETE ENTOURAGE!!!**

@muddiver91 2 года назад

“Your more than you think “ love it and agree !! It’s so nice to see someone do what they love and to be so humble as well .

@thechanceswetake13 2 года назад

Paul, my step dad used to swear by plumbing in low pressure argon and welding.. he said it welded inside and outside.. might have helped in building that tank.. he was a Stainless Fabrication specialist... miss his knowledge all the time.. I do honestly love all the amazing custom work you do.. i watch almost immediately when your videos come out!

@Shilohii65 2 года назад

Yes Paul......I’ve had a simple single axle trailer since 2002, and after attempting some repairs, improvements, and repainting in 2011, it was time for much needed improvements, repairs, and repainting. Your fab and welding encouraged me to purchase a very simple flux welder from Harbor Freight and “get after it.” I’m happy to report that I’m a much more satisfied trailer owner. I even fabbed my own spare tire rack for the side of my trailer, and it turned out way better than I expected....even made my own locking mechanism for the spare tire. So thank you for the swift kick in the backside, and the encouragement to “nail it!”

@bensonthomas2339 2 года назад

Hello how you doing

@chrisgriffin2587 2 года назад

Love Fri, Sun and Wednesday mornings when fabby uploads a video!

@duaneayers6117 2 года назад

The many reason's why I love watching Fab Rats channel is there long videos, no commercial, entertaining.

@RNCFabrication 2 года назад

That thing is looking great. I started watching your channel after my friend told me about you and Matt's offroad recovery. Now I have 2 youtube channels my wife will watch with me we love yall.

@keithreilly386 2 года назад

Enjoy your videos because if you mess something up you show it. Not like other channels that make things look like they never make a mistake. You and your family are real people that put out a quality video and you are one heck of a fabricator and mechanic. Thanks for doing this

@w.o.k. 2 года назад

I love this channel it reminds me of the Saturday morning 4x4 and car tv shows from when I was a kid... Which means the whole fab rats crew are celebrities in my book!!! you guys are awesome !! much love from Connecticut the armpit of New England

@moparman1962 2 года назад

We love this build, Paul & Team...this FJ45 is pretty much every 4x4, off-roader, trail and rock crawler's dream vehicle. We can't wait to see it at the Winter 4x4 Jamboree and when it is finally finished and you are making videos of your adventures with it. ;)

@timwienand7637 2 года назад

been waiting for this! I really hope you make it for the Jamboree!

@bones357 2 года назад

6:53 That gentleman looks just like Jerry Garcia, and sounds just like John Goodman!!👊😊

@k5blazernut485 2 года назад

This build is great. Keep up the good work & cant wait to see what's next

@bensonthomas2339 2 года назад

Hello how are you doing??

@Lucas12v 2 года назад

That's a cool bumper. Turned out better than i was expecting. For me personally, when i need something to be pressure tight, i just go straight to tig welding whenever practical. It takes longer to weld but i regain the time because i don't need to fix many leaks and it's less grinding if i want the welds smoothed off.

@sykopro 2 года назад

I laughed hard when he said he would be laying on the trailer working on it still while Michelle is driving to the event.

@billodebralski6507 2 года назад

🤣

@CORNDODGER 2 года назад

Dont LAUGH we have done that on the way to the race track a few times!!!!

@Ddabig40mac 2 года назад

Spoken like a true Derby guy

@billodebralski6507 2 года назад

@@CORNDODGER I laughed because I have done that.

@Ofthe7thSon 2 года назад

7:15 - absoblooodylutely you’re more than you think mate. Here I am in sunny Australia watching some dude build stuff over the other side of our pond in the US of A’s and I love it …… crack on and get it done - we’ll keep watching, because you ARE somebody worth watching.

@tomtucker8849 2 года назад

As always Paul, great video with helpful tips included. I hope that you get the tranny figured out soon, surely just a discombobulation at work her. Once you start checking into this you will get it fixed right up. Have a good day and be safe. Wear your goggles when grinding so you don't lose an eyeball.

@bensonthomas2339 2 года назад

Hello how are you doing??

@MrWarman17 2 года назад

One of my favorite channels on RU-vid. B is for build I have watched sense I was a kid basically !

@agoodballet 2 года назад

Man I fell in love with this build the second Paul held one of those wheels up to it and said it’s gonna be low. Now every single piece that he puts on it makes me a little bit more jealous each time. God damn that’s a dream rig. I envy Paul for having built the coolest rig on planet earth.

@nigelvasquez8028 2 года назад

That front end flex is awesome, and the extendo bit had me cracking up! Front bumper looks great, excellent custom work there Paul. I've always liked those old FJs but never seen a pick-up version until you found yours. I'm enjoying following your build, very interesting and i've learned a ton. Been thinking of making some square tube sliders for my 2008 taco, your inspiring people!

@drgunit893 2 года назад

Been watching this project unfold since the start , great work Paul. The Yota is gonna be a beast

@rwilli296 2 года назад

I just have to tell what I like about you and your show: You have really cool projects and you are a wizard when it comes to figuring out how to do something, since once you get an idea you go with it to the end and that is a talent, but the main thing I like about you is how humble and unpretentious you are, and your wife fits right in with your personality.. I know your kids are being raised right... I aspire to be as humble and salt of the earth as you are... Good luck with your Yota build.....

@bensonthomas2339 2 года назад

Hello how are you doing

@grandtheftundead6634 2 года назад

Such an outstanding job man, all the hard work is coming together. I’m glad we all get to see it along the way, this is your passion and just keep on living it!

@chldof1truekng434 2 года назад

Thanks for the laugh editor Michelle, when you threw in that hallelujah after the winch got mounted.🤣

@ajspak874 2 года назад

Also thank you Michelle for doing great editing and getting this content out for us while you're sitting in the truck 😂

@pfulton6616 2 года назад

Love your videos. Have brought me more joy than you know. Love your gratitude for your fans and appreciate all you do. You have a lovely family and friends. You are a lucky man to have such a wonderful wife in your corner. . I can barely keep up with my stuff, cars, house and other stuff. I’m very impressed and very grateful. Keep it up!

@brianwoods8750 2 года назад

Looks like he got him a new Chevy tow rig also! Temp tag in the window and all!! Congratulations! The FJ is coming out awesome!

@bensonthomas2339 2 года назад

Hello how you doing??

@jasoncampbell4723 2 года назад

Tons of work getting your FJ to completion. It’s looking awesome. That bumper looks tight!!

@jacobbruns4579 2 года назад

For future pressure testing, it's easier to start with a regulated pressure of about 5-15psi for the first run. This way the leaks will just bubble instead of blowing the soapy water away

@Laugh1ngboy 2 года назад

I was thinking just use a tig welder.

@TheBibliofilus 2 года назад

And perhaps to cut and plumb the vent before welding it solid to avoid the issue with welding to seal up a tank and having the pressure inside messing up the welds.

@BrettSolomon 2 года назад

Why does the bumper need to hold air?

@robkees9353 2 года назад

@@BrettSolomon I believe he’s going to have an onboard air compressor and he’s using the bumper as the tank. Just a guess though.

@brucebillington8336 2 года назад

@@robkees9353 You're exactly right, that is what he is going to use it for. 🙂

@goatskullrebellion4800 2 года назад

Gotta love Paul's quotes! "If it doesn't, we will say it should have." Paul talking about the winch fairlead.

@Bradzuzu 2 года назад

Great lines on the bumper Paul it turned out sweat !! Lots of hours and work but it's coming along perfectly .... Thank you Michelle for helping with the video editing , it all comes together and makes a great show ...!!

@timsparks2641 2 года назад

Amazing talent! So cool to watch your creativity and ability to get it out of your head onto the frame.

@kyhillbillys10 2 года назад

Man I love your attitude. Plus you have the skills to back it up

@ronaldbarnes8302 2 года назад

Looking awesome Paul! Hope the transmission isn’t to major a headache. Look forward to seeing the FJ in action! Thanks for sharing!

@deongerber3477 2 года назад

Paul, I can't wait for the Fabrats content. Really like your stuff, awesome skills and ideas

@RobbieHerrera 2 года назад

That build looks waaaay better than I imagined it to look. Awesome job!

@bensonthomas2339 2 года назад

Hello how are you doing??

@kerrycochrane3209 2 года назад

When I use to hang out with rock crawler friends they had hollow bumpers that they put valve stems on and fill with air. They then could air up tires, shocks, snow tubes or whatever's. Sure enjoy you all entertaining us old folks...

@doncaranci2547 2 года назад

I just saw the Toyota on the front grill. This needs to be made to say Yoda also.. Haha

@samwest9444 2 года назад

I think from what I saw in Facebook today they did

@TrzCharlie 2 года назад

Just phenomenal attention to detail. That thing is just bad ass! I cheated watched Instagram and saw Michell and you at the Jamboree. I guess that means you got the transmission issue repaired. I can't wait for footage of the "Yota" in action.

@heathenamerican8149 2 года назад

Man today is great all my favorite channels uploaded. Love this FJ keep up the great work, can't wait to see you get the Nugget finished. Matt really chose the right person for the job haha.

@lopin890 2 года назад

Morning Fab Rats❣❣ •JAMBOREE BOUND WITH THE FJ• Knowing your drive and desire to "get 'er done", Paul, I'm taking bets the FJ will be heading to Winter Jamboree!!! Love seeing family in all these builds!!..don't ever change!!! THAT is what makes ya'll who you are!! Your work ethic will keep prosperity flowing your direction for all time. Sending Prayers Love and Light with Angels to watch over all you do.... 🙏❤🌟👼

@fynbo1007 2 года назад

Thank you for sharing your creativity, it’s just amazing to see your skill in action. God bless you and your family.

@chuckster6513 2 года назад

Hey Paul and Fab Rats Crew It looks like you have some idea of what you are doing with all the custom fabracation going on, and it's always entertaining. Go Paul Go !

@stevenwithanS 2 года назад

Always happy to see another video from you guys. I'm an auto glass tech, I gotta say that windshield is starting to get to me. Great progress. Keep on it.

@bensonthomas2339 2 года назад

Hello how are you doing ?

@stevenwithanS 2 года назад

@@bensonthomas2339 parts came in. Truck back together

@bensonthomas2339 2 года назад

@@stevenwithanS I'm Jenny tinna by name were are you from

@jacobthornock317 2 года назад

So excited to see this out. My parents went out to the winter 4x4 at Stucki farms and saw it on the trailer and took photos. FJ is looking great. That is a nice bumper yet again and I am digging the winch fairlead. Thanks for posting.

@deejackson5930 2 года назад

I know it's a bunch of work, but you sure look like you're having fun! Thanks for the content.

@bensonthomas2339 2 года назад

Hello how you doing

@ericinthebush1961 2 года назад

Awesome fabrication of the front bumper Paul. Well done. Looking forward to seeing the final build all painted up.

@jameswarren423 2 года назад

Can’t wait to see this thing done it is going to be amazing your fabrication is stellar keep up the awesome work sir👍🏼🤩

@bensonthomas2339 2 года назад

Hello how are you doing??

@skistrycharski6999 2 года назад

The ARTIST at WORK you are Sir !! The vision you have amazing ! Anacortes,Wa.

@jameshicks4944 2 года назад

Great video,excellent camera work,it's a real gift to be able to look at something and figure out the cuts and welds in your mind and then just put it together,good job Paul.

@bensonthomas2339 2 года назад

Hello how you doing

@barrysmoots670 2 года назад

Put a welder in one hand and a grinder in the other and you become feerlless

@bensonthomas2339 2 года назад

@@barrysmoots670 how are you Barry

@Chris-bg8mk 2 года назад

For the extended drill bit, hold the parts in the lathe head and tail stock to align and tack. Then the alignment will be good when you spin them in your drill motor. No wobbles, less broken teeth!

@bensonthomas2339 2 года назад

Hello how you doing??

@ShanesGettingHandy 2 года назад

For anyone that doesn't already know, "TOYODA" with a "D" is usually found buried somewhere on the markings of your car, in often somewhat obscure places. This is essentially in honor of the Toyota founder Kiichiro Toyoda. The company name was chosen to have a "T" instead of a "D" because it took eight brush strokes (a lucky number) to write in Japanese, instead of ten.

@TrevorDennis100 2 года назад

That's the sort of factoid that tends to be passed on by a geek with a UFO spotter voice who would start it with 'Did you know...?' I am seeing Rowan Atkinson in my mind's eye, in his Mr Bean persona.

@JJ-xj3vi 2 года назад

When you replace the windshield, I think you need to get a sticker made so it looks exactly like it does now. That spiderweb crack makes it look even more BA than it does already. It's character!

@crvadventure9316 2 года назад

Wait a sec....at the end of the video the tires were covered with dirt! Did it drive? Did you figure out the transmission issue? Man that thing is sexy!

@bensonthomas2339 2 года назад

Hello how you doing

@kevincomeau2035 2 года назад

Started off watching Matt’s off road recovery .. He brought the Suzuki to you to be worked on & I started watching some of your other videos ,,,, What a true craftsman ! You make it look easy. I think the channel is perfect ,so much better than tv … So I submitted & hit the like 👍🏻 Can’t wait to see the Golden Nugget finished & anything else you do …. Awesome job to all !!

@jfply8 2 года назад

I can’t wait to see this thing painted. Love your work bro.

@mj_b23 2 года назад

No way! Leave it alone or clear coat it.

@jfply8 2 года назад

@@mj_b23 at least paint the chassis

@rockysuperstar1 2 года назад

PAUL Watching you weld the fender to the to thicker tube , that is tuff to do with out burning a hole's thru the fender . NICE JOB :-))

@flatblackandy 2 года назад

When she said “is that all we were getting” my heart still was hurting with how much you probably paid for that dom 🤣

@haroldphipps3457 2 года назад

Just glad it isn't CMS

@kennyFF033 2 года назад

Proper...ish fortune cookie fun> You MUST add "between the sheets" before, during or after reading your fortune cookie! Try it next time with a group of friends and enjoy a good laugh. Love from Central Texas.

@johnlennon335 2 года назад

Safety Glasses! It will happen so fast and rip your eyes out. See 21:30

@bensonthomas2339 2 года назад

Hello how you doing

@ncdean62 2 года назад

Factoring in the fabrication time and then the hours editing the final video your front bumper alone is priceless! An absolute work of art! Can't wait to see Yota in action!

@bensonthomas2339 2 года назад

Hello how are you doing

@keribowthorpe508 2 года назад

Got to see the Cox family and the YOTA in St. George on Saturday!!! This family is really as awesome as they seem on the videos and the YOTA is so COOL! I can't wait to see it "finished"! Are they ever really finished? Michelle was so nice to chat with (it's got to be kinda weird to have total strangers come up and " know" so much about you). Big thanks to Paul and Michelle for making their videos "G" rated and keep the movie quotes coming (especially Christmas Vacation quotes)!

@johnvineyard67 2 года назад

12.20 wow .. nice place to live... love the snow . your sooo lucky ..

@wtt8914 2 года назад

One of the first American Education I received upon immigrating to this country is how to read a fortune cookie. You must always add ".... In bed" in the end of reading your fortune. So there you go Fab Rats. Thank you always for the amazing content. The builds are both looking amazing.

@stevebowser7248 2 года назад

Bumper doubles as an air tank. Dang, thats creative.

@ralphjacobsen1845 2 года назад

Yota is coming together. Seen it out on the trail soon. Nice Pickup too. Jake and Vernice Minnesota

@kissane1980 2 года назад

That front bumper is so sweet. You killed it Paul. The fact that it's also an air tank is some seriously smart and efficient packaging. The coolest bumper I've ever seen fabricated. Well done!

@craigluhr3034 2 года назад

People that don't know how to work with metal would say you need to tap by hand. I have tapped literally several hundred thousand holes using a drill motor while installing steel doors and hardware over 35 years. We used to use beeswax before they came out with tapping fluid. Cutting oil is too messy. There is a product called Tap-ease that is wax like and lasts forever. The only way to break a tap is if you get the tap in a bind. If it stops cutting, stop, reverse, and hit it again. I never would tap using the impact function though. As an owner of several FJ's over the years and a current owner of a 76 Series, this build is looking awesome. Cant wait to see the finished product out on the trails.

@waterislife.9204 2 года назад

Epic fabrication/welding Sir. It's good to have lunch with families. 2022 is going to be awesome. Be blessed.

@ralphtaylor3796 2 года назад

Paul, now that ya got most of Yoda close to being done, think of painting it. a nice Yoda greens.

@houset1794 2 года назад

That Gentleman had it dead nuts your more than ya think there buddy. Master fabricator as well as good husband and Dad. Incredibly awesome RU-vid content

@johnbouttell5827 2 года назад

Dear Paul, you certainly know how to weld. In fact, I notice that you, like Rudy, Matt, Tom Tom -- and Andrew Camarata -- have remarkable welding skills. I have some questions about this. Who taught you how to weld? Did you go to welding school? What is your favourite welding kit? Best wishes, John in jolly old England.

@lordfrazerirwin990 2 года назад

UK calling! In another time this guy would have been called a sculptor the way he works metal.

@redline870 2 года назад

That Tesla Cybertruck looking, air pressure holding, winch mounting front bumper came out awesome!!

@glensubtorq 2 года назад

That plasma cutter has got to be a must have for creative fab work! Gotta get me one! 🤣

@skistrycharski6999 2 года назад

😱Wa. Represents of course salmon always 👍🏻! Anacortes,Wa. PNW

@kevinbegley5881 2 года назад

Last push Paul, you can do it! Thing looks amazing and will take on anything! 👍🇮🇪

@waynesbsf9532 2 года назад

FJ looking great . Keeps me motivated to working on my broken rigs here in Alaska!

@marytorbert5212 2 года назад

The FJ build so far is my favorite. Incredible watching it all come together. Can’t wait to see it rock climbing. I learned I should not have cable on my winch. Will try a rope. Great job guys and gal!

@mazdarxseven93 2 года назад

Love the bumper, killer job! A tig welder would save you time on the air tank bumpers.

@bensonthomas2339 2 года назад

Hello how you doing

@harveystephens6115 2 года назад

Guess Paul is a certified welder now!! Passed the pressure test!! Great job. Anxious to see issue with tranny. Pray it’s simple fix.

@kennethdoehler1285 2 года назад

I dont usally comment on anything. But I’m addicted to your stuff. Bought a jeep and have been working hard on it. Because of you guys. Keeo it up, love it.

@scottbeilby2182 2 года назад

Awsome front bumper winch set up air tank combo. Looking good

@joejimenez8712 2 года назад

Yoda is looking perfect absolutely some fantastic work. Can I get that type of rope for my side-by-side winch?

@ScathArachAK 2 года назад

I really enjoy these videos. The way you work around issues and something not working how you initially planned

@bensonthomas2339 2 года назад

Hello how you doing

@intracshuttle 2 года назад

It's amazing watching this come together. I can tell you have been putting some late nights in! It'll all be worth it when you go for the first drive

@block4565 2 года назад

Pretty sweet Chevy you took on that parts/ lunch run! I always enjoy your videos. What is "DOM" when you're referring to the metal? Also what happens if a bumper isn't airtight? That's a sweet looking bumper

@jessereed8589 2 года назад

I need one bumper built for my 2015 silver auto lol to Farr to your shop from my front door I just took a bumper off a older weinbago cut few inches off both sides bolted right on it works like your videos it takes along time to build your toys lol

@chrisgilbert2152 2 года назад

ahhh nothin better than a Fab Rats vid in the morn! Complete with the RU-vid queen!!

@jeremyhanna3852 2 года назад

I have built a few air tanks in my day I recommend putting por 15 fuel tank sealer on the inside of it will save a lot of headaches later

@paulcleary8137 2 года назад

You can use your Beast Notcher to drill holes like to needed to in the front bumper. Clamp the bumper in the notcher. Also if you need to notch true holes in a frame, and the notcher can clamp onto the frame and so on.

@willnewberry2347 2 года назад

About the air tank. Going to jump on the "Need a drain plug" wagon. Also, what are you going to do for filtration? Since the inside isn't coated, rust will form and can ruin your airlines. Not too bad if you're just airing tires, but would hate for an air locker or something to get ruined. Lots of work for 2 gallons of air lol

@bensonthomas2339 2 года назад

Hello how you doing